Six Black Sliding Cabin-Camera Covers
A six-pack of manual ABS camera sliders with adhesive-backed frames, designed for the cabin-camera area above the interior mirror on Model 3 and Model Y. Close the shutter only while parked and when camera-dependent functions are not in use; keep the complete camera view unobstructed before every drive.
- 6 Black Covers
- Manual Slider
- 0.03 Inch Profile
- Parked-Only Covering
Características principales
-
Manual Slider
Move the shutter across the aperture for parked-only lens covering; fully uncover the camera before every drive.
-
Six Black Covers
The pack contains six separate sliders for individually matched camera locations.
-
Low ABS Profile
Each cover measures 0.43 × 1.10 × 0.03 inch, with an approximately 8 mm round aperture.
-
Adhesive Backing
The frame attaches to a suitable clean surface around the camera, keeping adhesive away from the lens.
-
Cabin-Camera Placement
Fits the cabin-camera housing above the interior mirror.
-
Device Use
Laptop, tablet and phone use requires sufficient bezel space and clearance for screen closure.
Aspectos destacados
Manual Sliding Shutter
The small shutter moves across the round opening.
Aperture and Footprint
The frame measures 0.43 × 1.10 inch, is 0.03 inch thick and has a 0.32 inch aperture.
Six Separate Black Covers
The pack includes six individual black sliders.
Compatibilidad
| Modelo | Years / Version | Notas |
|---|---|---|
| Model 3 | Cabin-camera housing above the interior mirror. | |
| Model Y | Cabin-camera housing above the interior mirror. |
The open frame must leave the entire camera view and nearby sensors clear. If this cannot be established, do not attach the cover; remove it entirely if any obstruction remains.
Especificaciones
| Tipo de producto | Manual sliding camera cover |
|---|---|
| Compatible Models | Tesla Model 3 / Model Y |
| Position / Location | Around the cabin camera above the interior rear-view mirror |
| Material | ABS plastic |
| Color | Negro |
| Cantidad | 6 covers |
| Dimensiones | 0.43 × 1.10 × 0.03 in (approximately 11 × 28 × 0.8 mm) |
| Peso | Approximately 1 g per cover |
| Installation Type | Adhesive-backed frame |
| Hole Diameter | 0.32 in (approximately 8 mm) |
What's in the Box
- 6×Black sliding camera cover
Instalación
- Clean and dry the surrounding mounting surface using a method suitable for that trim. Keep cleaners and adhesive off the lens.
- Leave the shutter fully open, remove the adhesive liner and attach the frame only if the complete camera view remains clear. Do not press or stick anything onto the lens.
Conviene saber
Precaución
- Close the slider only while parked and while no camera-dependent function is being used. Before every drive, completely uncover the camera. Remove the entire cover if its frame or aperture obstructs any part of the camera view.
- Opening the slider alone does not establish full camera compatibility.
- Keep adhesive, chemical cleaners and abrasive products away from the camera lens. Keep nearby sensors unobstructed.
Cuidado
- Keep the slider free of dirt. Remove a loose, damaged or obstructing cover.
- Wipe the camera lens gently with a clean soft cloth, without chemical or abrasive cleaners.
Preguntas frecuentes
Can I drive with the slider closed?
No. Keep the entire cabin-camera view unobstructed before every drive. The camera supports driver monitoring and other vehicle functions; this slider must never be used to bypass them.
Does disabling data sharing turn off driver monitoring?
No. Cabin-camera data sharing and driver monitoring are separate functions. For data-sharing preferences, use the vehicle settings and follow the owner manual.
Does an open slider prove camera compatibility?
No. The frame and aperture must also leave the complete camera view clear.
What is included?
Six separate black camera sliders. Other devices shown in photos are examples and are not included.
English 
German 
Spanish 