TESVXtesvx.com
Fuente: https://tesvx.com/es/product/tesla-model-3-y-led-door-projector-puddle-lights/
0

Reseñas

Todavía no hay reseñasSé el primero en compartir tu experiencia con este producto.

Especificaciones

Tipo de productoDoor projector puddle light
Vehicle CompatibilityModel 3 & Model Y & Model YL (2017+)
CantidadFront Door 2 pieces / Front & Rear Door 4 pieces
Método de instalaciónDirect plug-in replacement, no wire cutting or splicing
Peso del envío167 g (0.37 lb)
ProjectionRed, white and black Plaid-style graphic

Detalles

A Plaid-Pattern Projection When Your Door Opens

These plug-in LED modules replace factory puddle lights and cast a red-and-white plaid-style graphic onto the ground when a door opens. Choose two modules for the front doors or four for front and rear doors on Model 3, Model Y or Model YL.

  • Plug-In Replacement
  • 2 or 4 Pieces
  • LED Projector
  • Model 3 / Y / YL

Características principales

  1. Door-Open Graphic

    LED projectors cast a plaid-style pattern with red and white lines onto the ground.

  2. Front Pair

    The 2PCS option supplies two modules for the left and right front doors.

  3. Four-Door Set

    The 4PCS option supplies four modules for front and rear doors with compatible lamp positions.

  4. Plug-In Connection

    Replace matching factory puddle-light modules without cutting or splicing the vehicle wiring.

  5. Plug-In Module

    Uses the original housing, retaining tabs and electrical connector at each door position.

  6. Variable Appearance

    Ambient light, surface texture, door height and camera exposure change apparent contrast and sharpness.

Aspectos destacados

Front-Door Pair - TESVX Door Projector Puddle Lights
Front-Door Pair

The 2PCS option supplies the two front-door projector modules. The illustrated ground graphic shows the intended pattern; actual contrast varies with light, distance and surface.

Four-Door Configuration - TESVX Door Projector Puddle Lights
Four-Door Configuration

The 4PCS option adds the two rear-door modules. The four-door illustration is not a measurement of brightness.

Original Connectors

Each module plugs into the original connector without splicing.

Compatibilidad

Modelo Years / Version Notas
Model 3 2017+ Earlier and Highland families.
Model Y 2020+ Earlier and Juniper families.
Model YL 2026+ Model YL family.

The combined selection names all three model families. It does not mean each model began in 2017, or that every production revision uses the same lamp.

Especificaciones

Tipo de producto LED door projector modules with plaid-style graphic
Compatible Models Model 3, Model Y and Model YL with matching factory door-light modules
Position / Location Front door lamp openings, or front and rear door lamp openings
Color Red-and-white projected lines against the ground background
Cantidad 2 front modules or 4 front-and-rear modules
Light Source LED projector
Installation Type Plug-in replacement at compatible original door-light connectors
Contenido del paquete 2 or 4 projector modules according to selection

What's in the Box

  • Front Door 2PCS: 2 x LED projector modules for the front doors
  • Front & Rear Door 4PCS: 4 x LED projector modules for front and rear doors

Instalación

Difficulty
Moderate
Herramientas
Non-marring trim tool
  1. Open the door, fully lower its window and keep the door open. Release the original lamp carefully with a non-marring trim tool; do not pull it away against attached wiring. Release the connector lock before unplugging.
  2. Connect each projector without cutting or splicing and seat it flush.

Conviene saber

Precaución
  • Keep each door open during installation and fully lower the corresponding window before disconnecting the original lamp. Do not pull against attached wiring or close a door with loose modules or dangling wiring.
  • A puddle-light electrical fault can also affect window operation.
  • These aftermarket decorative projectors are not official Tesla lights. A focused graphic is not a guarantee of greater walking-area illumination or safe footing.
Cuidado
  • Wipe the exterior lens gently with a soft damp cloth; do not pressure-wash the connector or flood the door opening.

Preguntas frecuentes

What does each quantity option include?

2PCS supplies the two front-door projector modules. 4PCS supplies four modules for front and rear doors.

Does installation require wire cutting?

Matching modules connect at the original lamp connector without cutting or splicing. If the connector or housing differs, stop rather than modifying the wiring or forcing the housing.

Will the projection always look like the photos?

No. Ambient light, ground color and texture, distance, moisture and camera exposure affect contrast and sharpness. The graphic does not widen walking-area illumination.

Is this an official Tesla projector?

These are aftermarket decorative projectors. The plaid-style graphic does not establish Tesla affiliation, approval or vehicle-wide compatibility.

Recomendados

Seleccionar especificaciones

Entrega

Se envía en 1-3 días laborables

Free shipping on eligible orders of US$149 or more

Métodos de pago

  • PayPalPayPal
  • Tarjetas de débito y créditoVisaMastercardAmerican Express
  • Apple PayApple Pay
  • Google PayGoogle Pay
  • BancontactBancontact
  • BlikBlik
  • EPSEPS
  • iDealiDeal
  • MyBankMyBank
  • Przelewy24Przelewy24
  • TrustlyTrustly
  • MultibancoMultibanco

Los métodos disponibles pueden variar según la moneda y el país de facturación; la lista definitiva se muestra al finalizar la compra.

Servicio

  • Pago seguro

    Los pagos se procesan a través de una conexión cifrada.

  • Asistencia posventa

    Contacta con nosotros si tienes dudas sobre la instalación o el uso.

Especificaciones

Tipo de producto
Door projector puddle light
Vehicle Compatibility
Model 3 & Model Y & Model YL (2017+)
Cantidad
Front Door 2 pieces / Front & Rear Door 4 pieces
Método de instalación
Direct plug-in replacement, no wire cutting or splicing
Peso del envío
167 g (0.37 lb)
Projection
Red, white and black Plaid-style graphic

Escribe una reseña

2- or 4-Piece LED Door Puddle Lights with Plaid-Style Projection for Tesla Model 3 / Model Y / YL
Valoración general *
¿Qué destacarías?opcional, hasta 3
Añadir fotos0 / 5
JPG, PNG o WebP, hasta 5 MB cada uno.

Las reseñas se revisan antes de publicarse. La etiqueta Compra verificada se añade automáticamente cuando tu correo electrónico coincide con el de un pedido.

TESVX product image
2- or 4-Piece LED Door Puddle Lights with Plaid-Style Projection for Tesla Model 3 / Model Y / YL

Rango de precios: desde US$32.88 hasta US$52.99

Añadir al carrito Este producto tiene múltiples variantes. Las opciones se pueden elegir en la página de producto