Measure, Mix and Apply Snow Foam
This pressure-washer foam cannon combines an aluminum alloy spray head with a transparent 1 L bottle, a wide filling opening and a filtered suction tube. Available in 1/4" Quick Connect or Karcher Connect versions. Its listed 276 bar / 4000 PSI maximum is an equipment limit, not a target pressure for washing your vehicle.
- 1 L Bottle
- Aluminum Alloy Head
- Filtered Intake
- Two Connector Options
- Adjustable Nozzle
Características principales
-
Foam Application
Applies a soap-and-water foam mixture using a compatible pressure washer.
-
One-Liter Bottle
A transparent 1 L reservoir and markings help gauge the mixture and monitor the remaining level.
-
Wide Filling Mouth
The bottle opening provides access for adding the shampoo and water mixture.
-
Filtered Suction Tube
A filter at the intake end of the tube helps keep debris out of the spray system.
-
Two Connector Choices
Available with a 1/4" Quick Connect or Karcher Connect fitting.
-
Adjustment Controls
The pictured head includes a foam-mixture control and adjustable front nozzle.
Aspectos destacados
Foam Application
The example shows foam applied to a vehicle using a compatible washer and shampoo. Foam thickness depends on the mixture and washer output; no fixed result is specified.
Mixture and Nozzle Controls
The pictured head has a top foam adjustment control and an adjustable front nozzle, with a suction tube extending into the bottle.
Connector Options
The gallery includes a black bayonet-style connector.
Measured Filling
Use the transparent bottle and scale to mix shampoo according to its label. The bottle holds 1 L; washer flow requirements and a universal soap ratio are not specified.
Compatibilidad
| Modelo | Years / Version | Notas |
|---|---|---|
| 1/4" Quick Connect | TCT009-SI: pressure-washer gun with matching quick-connect outlet. | |
| Karcher Connect | TCT009: Kärcher Connect bayonet version. |
Choose the gun connector, not a Tesla model. The G1/4"-F head inlet is a thread specification and is not the same connection as a 1/4" quick-connect outlet. Minimum pressure and flow requirements are not listed.
Especificaciones
| Tipo de producto | Pressure-washer snow foam cannon |
|---|---|
| Compatible Models | Pressure-washer gun with the selected matching fitting |
| Material | Aluminum alloy spray head; transparent plastic bottle |
| Capacidad | 1 L (33.8 US fl oz) |
| Entrada | G1/4"-F inlet thread |
| Connector Type | 1/4" Quick Connect / Karcher Connect (select one) |
| Installation Type | Attach selected fitting to a compatible pressure-washer gun |
| Max Pressure | 276 bar / 4000 PSI maximum; not a vehicle cleaning-pressure recommendation |
| Nozzle Orifice | 1.2 mm (0.047 in) |
What's in the Box
- Foam cannon with bottle and the selected connector configuration; pressure washer, spray gun and cleaning shampoo are separate.
Instalación
- Follow the washer instructions to turn it off and relieve pressure before connecting.
- Add the shampoo and water to the bottle according to the shampoo label, then fit the head and secure the selected gun connection. Do not improvise or force an incompatible fitting.
- Follow the washer instructions for starting and setting the spray. Adjust the foam mixture and nozzle as required, without using maximum pressure as a vehicle-wash target.
- Apply according to the vehicle’s cleaning guidance, keep the nozzle moving and rinse shampoo before it dries. Turn off and relieve pressure before removing the cannon.
Conviene saber
Precaución
- The listed 4000 PSI maximum is not a target pressure for washing vehicle paint.
- Karcher Connect is not a universal fit for every Kärcher model or gun.
- Turn off the washer and release pressure before connecting, disconnecting or changing fittings.
- For Model 3, keep the nozzle at least 30 cm (12 in) from the surface and moving; avoid directing jets at sensors, cameras, seals, electronic modules or exposed wiring. Follow the applicable vehicle cleaning instructions.
- Do not spray the charge port or charging equipment. Wash only when the vehicle is not actively charging; do not aim a pressurized jet at people or animals.
- Use a car shampoo permitted by the vehicle and foam-cannon instructions. Avoid acidic, highly alkaline or corrosive cleaners and do not let shampoo dry on the vehicle.
Cuidado
- Rinse the bottle, suction tube and foam path after use. Avoid leaving shampoo to dry in the intake or nozzle.
- Store the emptied, clean cannon out of direct sunlight.
Preguntas frecuentes
Will it fit any electric pressure washer?
It requires a matching gun connector and suitable flow and working pressure. Electric or gas power alone does not establish compatibility.
Is 4000 PSI the pressure I should use on my car?
No. It is the listed maximum cannon pressure.
Does Karcher Connect fit every Kärcher gun?
No. It is not a universal fit for every Kärcher gun.
What should I mix in the bottle?
Use a compatible car shampoo at its specified foam-cannon dilution. There is no universal mixture ratio; avoid cleaners prohibited by the vehicle instructions.
Why might the foam be thin?
Foam depends on shampoo, dilution, nozzle setting, washer flow and pressure.
English 
German 
Spanish 