A Dynamic Welcome at Every Door
Project a dynamic logo or Welcome pattern beneath the door with these replacement LED puddle lights. A rotatable lens lets you align the projection angle, while a glass lens and aluminum housing form the module. Available in two or four modules.
- 360° Adjustable
- 2 Projection Styles
- 2 or 4 Modules
Características principales
-
Dynamic door projection
Adds a logo or Welcome pattern on the ground when the door light is activated.
-
Adjustable projection angle
A rotatable lens allows adjustment through 360° for pattern alignment.
-
Two design choices
Select Dynamic Tesla & T Logo or Dynamic Welcome & T Logo.
-
Two kit sizes
Choose 2 PCS for two matching door-light locations or 4 PCS for four matching locations.
-
Glass lens and aluminum shell
The projector combines a glass lens with an aluminum housing.
-
Replacement light module
Connects at the original door-light location.
Aspectos destacados
Welcome Pattern
The Dynamic Welcome & T Logo option adds a moving welcome design to the door-entry area. Projection appearance depends on the ground surface and surrounding light.
Tesla & T Logo Pattern
The Dynamic Tesla & T Logo option provides the alternative logo design. Both style options offer two- and four-module kits.
Replacement Light Modules
The modules fit at the original door-light locations through the original connectors.
Compatibilidad
| Modelo | Years / Version | Notas |
|---|---|---|
| Model 3 | Original door-light location, including Highland | |
| Model Y | Original door-light location, including Juniper |
A four-module kit covers four door-light locations.
Especificaciones
| Tipo de producto | 3D dynamic LED puddle lights with 360° rotatable projection lens |
|---|---|
| Compatible Models | Model 3 / Model Y, including refreshed versions |
| Position / Location | Original light opening underneath the door panel |
| Material | Glass lens; aluminum housing |
| Cantidad | 2 modules (2 PCS) or 4 modules (4 PCS), according to the selected option |
| Light Source | LED projection with HD glass lens |
| Lighting Modes | Dynamic Tesla and T logo, or dynamic Welcome and T logo |
| Installation Type | Replaces original door light through matching connector and housing |
What's in the Box
- 2 or 4 x Dynamic LED puddle-light modules, according to the selected style and quantity
Instalación
- Keep the door open and fully lower its window.
- Carefully release the original light with a suitable trim tool. Support it close to the opening, release the connector lock and disconnect without pulling the wiring.
- Connect the module, align the projection and secure the housing without pinching the lead.
- Once the light is reconnected and secured, restore the window using its control.
Conviene saber
Precaución
- No wire cutting required.
- Keep the door open and fully lower its window before removing the original light. Do not pull on the attached wiring.
- Puddle-light electrical faults can also affect window lowering.
- These are decorative projection lights. The projected pattern does not establish that the ground is free of obstacles.
Cuidado
- Keep the modules securely seated and their lens surfaces clean.
- Recheck the projection and window behavior if a light stops working.
Preguntas frecuentes
Which style options are available?
Choose Dynamic Tesla & T Logo or Dynamic Welcome & T Logo. Select an actual design rather than the Please Select placeholder.
Should I choose two or four modules?
Two modules serve two door-light positions; four modules serve four.
Can I adjust the projection angle?
The lens has a 360° rotation adjustment for pattern alignment.
English 
German 
Spanish 