TESVXtesvx.com
Quelle: https://tesvx.com/de/product/model-3-y-mud-flaps/
0

Bewertungen

Noch keine BewertungenTeilen Sie als Erster Ihre Erfahrungen mit diesem Produkt.

Technische Daten

ProdukttypMud Flaps and Splash Guards
Vehicle Compatibility2017–2023.10 Model 3 (Fremont/Shanghai Factory); 2021–2024 Model Y (Fremont/Shanghai Factory)
MaterialAll-weather TPE
InstallationsmethodeExisting wheel-arch mounting locations with supplied fitment hardware; no drilling
LieferumfangFour pieces: front and rear
Versandgewicht500 g (1.1 lb)

Details

Keep Road Spray Behind the Wheels

Add front and rear wheel-arch splash coverage with this four-piece set for Fremont- or Shanghai-built Model 3 (2017–October 2023) or Model Y (2021–2024). Each vehicle option has its own fitment. The flaps use existing wheel-arch mounting points and supplied hardware.

  • Set of 4
  • Front + Rear
  • Existing Mounting Points
  • Fremont / Shanghai

Hauptmerkmale

  1. Wheel-Arch Coverage

    Shaped flaps add coverage behind the tires to help reduce road spray reaching the lower body.

  2. Four-Piece Set

    One vehicle set contains a front pair and a rear pair, with each piece fitted to its designated corner.

  3. Existing Mounting Points

    Align the flaps with the existing wheel-arch positions and use the matching installation hardware.

  4. No Painted-Body Drilling

    Do not drill or modify the body to force a flap into place; stop if the holes or clips do not align.

  5. Factory and Model Options

    Select TSL0901 for the stated Model 3 application or TSL0277 for the stated Model Y application.

  6. Accessible for Cleaning

    Inspect and rinse the flaps and wheel-well area regularly so road grime does not remain trapped behind them.

Highlights

A Front and Rear Set - TESVX Mud Flaps
A Front and Rear Set

Four formed flaps cover the front and rear positions, marked FL, FR, RL and RR as shown in the installation guide.

Match the Wheel-Arch Edge - TESVX Mud Flaps
Follows the Wheel-Arch Edge

The fitted flap extends behind the tire and along the lower arch edge.

Allow for the Lower Extension - TESVX Mud Flaps
Allow for the Lower Extension

The flap extends lower than the original trim. Splash guards help reduce spray, but they cannot prevent every stone impact or replace paint-protection film.

Kompatibilität

Modell Years / Version Hinweise
Model 3 2017–October 2023 Fremont or Shanghai factory
Model Y 2021–2024 Fremont or Shanghai factory

Not listed for Model 3 Highland, Model Y Juniper, Model YL or Berlin-built Model Y. Identify your factory from the VIN or vehicle documents.

Technische Daten

Produkttyp Front and rear mud flap splash guard set, 4 pieces
Compatible Models Model 3 (2017–October 2023) / Model Y (2021–2024), Fremont or Shanghai factory
Position / Location Front and rear wheel arches
Menge 4 pieces (front pair and rear pair)
Installation Type Existing wheel-arch mounting points with supplied hardware; no body drilling
Drilling Required Nein
Lieferumfang 4 mud flaps and matching installation hardware; product installation guide available
Versandgewicht 500 g (1.1 lb)

What's in the Box

  • 4×mud flaps (2 front, 2 rear)
  • Matching installation hardware (individual count not specified)

Installation

Difficulty
Moderate
Werkzeuge
Tools for the supplied hardware and original rear lower fastener
  1. Park on a stable, level surface. Identify FL, FR, RL and RR, and dry-fit each piece against the exact arch and mounting positions.
  2. Align the tabs, fit the mounting fastener bodies, then their locking centers without forcing the liner.
  3. For the rear lower position shown in the guide, remove and retain the original lower fastener, fit the flap and reinstall the original fastener. Stop if your arch or hardware differs.

Gut zu wissen

Achtung
  • Any mud flap extends lower than the original trim; watch steep ramps, deep snow, curbs and car-wash rails.
  • Mud flaps cannot block every stone or prevent all paint damage and do not replace paint protection film.
  • Do not drill the painted body; if holes or clips do not align, stop and recheck the selected application.
  • Installed, scratched, modified or road-used parts may not qualify for return; dry-fit first.
Pflege
  • The exposed surfaces are easy to inspect and clean during normal wheel-well washing.

FAQ

Does this set fit Model 3 Highland or Model Y Juniper?

No compatible option for either refresh generation is listed. Order a product designed around the newer wheel-arch geometry.

Does it fit a Berlin-built Model Y?

No. The Model Y selector explicitly states Fremont/Shanghai factory, so Berlin vehicles are not included.

Is drilling required?

The set is designed to use existing mounting locations. Do not drill the painted body.

What comes with the set?

Four mud flaps (two front and two rear) with installation hardware.

Empfehlungen

Technische Daten auswählen

Lieferung

Versand in 1-3 Werktagen

Free shipping on eligible orders of US$149 or more

Zahlungsmethoden

  • PayPalPayPal
  • Debit- & KreditkartenVisaMastercardAmerican Express
  • Apple PayApple Pay
  • Google PayGoogle Pay
  • BancontactBancontact
  • BlikBlik
  • EPSEPS
  • iDealiDeal
  • MyBankMyBank
  • Przelewy24Przelewy24
  • TrustlyTrustly
  • MultibancoMultibanco

Die verfügbaren Methoden können je nach Währung und Rechnungsland variieren; die endgültige Liste wird an der Kasse angezeigt.

Service

  • Sichere Kasse

    Zahlungen werden über eine verschlüsselte Verbindung abgewickelt.

  • After-Sales-Support

    Kontaktieren Sie uns bei Fragen zur Installation oder Verwendung.

Technische Daten

Produkttyp
Mud Flaps and Splash Guards
Vehicle Compatibility
2017–2023.10 Model 3 (Fremont/Shanghai Factory); 2021–2024 Model Y (Fremont/Shanghai Factory)
Material
All-weather TPE
Installationsmethode
Existing wheel-arch mounting locations with supplied fitment hardware; no drilling
Lieferumfang
Four pieces: front and rear
Versandgewicht
500 g (1.1 lb)

Bewertung schreiben

All-Weather TPE Mud Flaps Splash Guards with No-Drill Installation for Tesla Model 3 / Model Y
Gesamtbewertung *
Was ist Ihnen besonders aufgefallen?optional, bis zu 3
Fotos hinzufügen0 / 5
JPG, PNG oder WebP, jeweils bis zu 5 MB.

Bewertungen werden vor der Veröffentlichung geprüft. „Verifizierter Kauf“ wird automatisch hinzugefügt, wenn Ihre E-Mail-Adresse mit einer Bestellung übereinstimmt.

TESVX product image
All-Weather TPE Mud Flaps Splash Guards with No-Drill Installation for Tesla Model 3 / Model Y

Ursprünglicher Preis war: US$49.00Aktueller Preis ist: US$27.99.

In den Warenkorb Dieses Produkt weist mehrere Varianten auf. Die Optionen können auf der Produktseite gewählt werden