A Carbon-Pattern Accent for the Rear Console
This molded ABS cover fits over the rear center console around the air vent and USB area on Model 3 and Model Y. Its printed carbon fiber pattern is available in bright glossy or matte finish. The cover attaches with double-sided adhesive.
- Molded ABS
- Carbon Fiber Pattern
- Bright or Matte
- Adhesive Attachment
Hauptmerkmale
-
ABS Construction
The molded plastic cover carries a printed carbon fiber pattern rather than a carbon fiber shell.
-
Rear Console Accent
The cover wraps the grey rear console section around the air vent and USB area.
-
Two Finish Options
Choose Bright Carbon Fiber for a glossy appearance or Matte Carbon Fiber.
-
Adhesive Attachment
Double-sided adhesive secures the cover over the existing rear console surface.
-
Single Cover Set
The package contains one rear vent cap and double-sided adhesive tape.
-
Opening Alignment
Cutouts line up with the vent opening and both USB ports.
Highlights
Molded Rear-Console Profile
The molded cover wraps the rear console around the vent and USB area. Its glossy printed carbon pattern is shown on the complete cover.
Vent and USB Openings
A wide opening frames the vent, with two smaller openings below for the USB area. Match these cutouts to the actual rear console.
Adhesive on the Back
The reverse view shows strips of double-sided adhesive across the panel and around its perimeter for peel-and-stick attachment.
Kompatibilität
| Modell | Years / Version | Hinweise |
|---|---|---|
| Model 3 | 2017–2023 | Rear console vent and USB area |
| Model Y | 2020–2025.03 | Rear console vent and USB area |
Fits the rear console of Model 3 2017–2023 and Model Y 2020–2025.03.
Technische Daten
| Produkttyp | Rear console vent and USB area cover |
|---|---|
| Compatible Models | Model 3 (2017–2023); Model Y (2020–2025.03), with matching console layout |
| Position / Location | Rear center console behind the armrest |
| Material | Injection-molded ABS plastic |
| Surface Finish | Printed carbon fiber pattern; bright glossy or matte |
| Menge | 1 cover |
| Installation Type | Double-sided adhesive attachment |
| Versandgewicht | 399 g (0.88 lb) |
What’s in the Box
- 1×Backseat Vent Cap
- 1×Double-Sided Adhesive Tape
Installation
- Peel the backing from the double-sided adhesive tape.
- Stick the cover over the grey rear-console section behind the armrest.
Gut zu wissen
Pflege
- Wipe the cover with a soft cloth and a cleaner suitable for its finish. Keep liquid out of the air vent and USB ports.
FAQ
Is this a carbon fiber shell?
No. The cover is molded ABS plastic with a printed carbon fiber pattern.
Which finishes can I choose?
The options are Bright Carbon Fiber and Matte Carbon Fiber. White is not among the current finish options.
How is the cover attached?
It attaches over the existing console using double-sided adhesive tape.
What is included?
One rear vent cap and double-sided adhesive tape are included.
Does it block the vent or USB ports?
No. The cover leaves the vent adjustment and USB connections accessible.
English 
German 
Spanish 