PLAID Letter Badge in Four Finish Options
Add PLAID lettering as a decorative detail on a suitable smooth, flat exterior body surface. The metal-alloy emblem is available in glossy black, matte black, red or silver and has pre-applied adhesive backing. Available in four finishes, with supplied application instructions.
- Metal alloy
- Four finish options
- Adhesive backing
Hauptmerkmale
-
PLAID Lettering
An adhesive letter emblem adds a decorative detail to a suitable vehicle body surface.
-
Metal Alloy
The lettering is made of metal alloy with a finish selected from the available options.
-
Four Finish Choices
Choose glossy black, matte black, red or silver; the finish comparison image shows alternatives, not a four-badge package.
-
Adhesive Backing
The supplied badge uses pre-applied adhesive, so installation does not require drilling into the panel.
-
Surface Placement
Made for a smooth, flat painted location.
-
Single Selected Emblem
One badge in the selected finish is supplied with installation instructions; it does not change the vehicle’s equipment or performance.
Highlights
Choose One of Four Finishes
Glossy black, matte black, red and silver are separate finish choices. The comparison image shows the alternatives together; each order option supplies one selected badge. The four finishes give different looks.
Metal Lettering with Adhesive Backing
The metal-alloy PLAID letters attach using the supplied adhesive backing. Align the lettering with the backing still in place. Adhesive application avoids drilling but still depends on a clean, compatible surface and correct cure.
Plan the Location
Choose a smooth, flat painted body area that gives the full badge adequate contact. It is a decorative addition and does not establish a factory performance version or alter vehicle equipment.
Kompatibilität
| Modell | Years / Version | Hinweise |
|---|---|---|
| Universal | Decorative use on a smooth, flat body surface. |
Fit depends on the intended surface, badge outline and adhesive compatibility rather than the vehicle model name.
Technische Daten
| Produkttyp | Decorative PLAID letter badge emblem |
|---|---|
| Compatible Models | Vehicle decoration |
| Position / Location | Suitable smooth, flat exterior body surface, clear of functional areas |
| Material | Metal alloy lettering |
| Farbe | Glossy black / matte black / red / silver, selected separately |
| Menge | 1 selected badge |
| Installation Type | Pre-applied adhesive backing; no panel drilling |
| Lieferumfang | One selected PLAID badge with adhesive backing and installation instructions |
| Versandgewicht | 10 g (0.35 oz); shipping data, not badge net weight |
What's in the Box
- 1×PLAID letter badge emblem in the selected finish, with pre-applied adhesive backing
- Installation instructions
Installation
- Test the intended position with its adhesive backing covered, keeping all functional areas and moving gaps clear.
- Prepare a smooth, flat surface using cleaning products compatible with the paint and any coating.
- Align the badge, remove the adhesive backing as instructed and apply even pressure without touching the adhesive or forcing the lettering around a curve.
- Allow the instructed cure before washing or exposing it to demanding conditions.
Gut zu wissen
Achtung
- Do not place it over cameras, sensors, lamps, key readers, handles, moving panel gaps, charging-port mechanisms or drainage paths.
- Adhesive decoration does not change vehicle performance, equipment or factory trim designation. Choose a location without obstructing original labels or controls.
- Removal can leave residue or disturb a coating or weak paint.
Pflege
- Clean gently with products suitable for the badge finish and vehicle coating. Keep high-pressure jets away from adhesive edges.
- Remove a loose badge using an appropriate surface-compatible method rather than relying on it to remain attached.
- Follow the actual adhesive and paint/coating guidance for removal; avoid assuming that heat or an alcohol wipe is suitable for every surface.
FAQ
Does the finish comparison image mean I receive four badges?
Each option supplies one PLAID badge in the selected glossy black, matte black, red or silver finish. The comparison image displays the alternatives together.
Does this make my vehicle a Plaid model?
The emblem is a decorative addition. It does not change the vehicle’s factory trim designation, installed equipment or performance.
Can it be applied to any vehicle panel?
It suits any smooth, flat surface large enough for the full badge outline.
Can I remove it without leaving a mark?
Removal depends on the adhesive, paint condition and any coating underneath. Follow compatible removal guidance and expect that residue or surface effects may need attention; avoid uncontrolled heat or solvents.
English 
German 
Spanish 