Black Screw-On Tire Valve Caps
Finish the wheel valve ends with black screw-on caps and an inner rubber sealing ring. Remove the existing cap and fit the replacement by hand to the valve stem. For Model 3, Y, S or X.
- Black Finish
- Screw-On
- Inner Rubber Ring
- Hand Installation
Hauptmerkmale
-
Screw-On Fit
Replace the existing cap by hand.
-
Inner Rubber Ring
The cap has an internal rubber sealing ring around the valve opening.
-
Black Finish
The black caps give the valve ends a compact, coordinated appearance on the wheel.
-
Hexagonal Body
Flat sides provide a grip surface for fitting and removing the cap.
-
Removable for Pressure Readings
Unscrew the cap to use a pressure gauge, then refit it.
-
Valve Compatibility
Suitable applications depend on the actual valve thread, seal and clearance, including replacement wheels.
Highlights
Compact Black Cap
The black hexagonal cap fits over the threaded valve end and stays removable for normal tire-pressure readings.
Rubber Ring Inside
An inner rubber ring sits inside the cap around the valve opening. It helps close off the opening against everyday dirt; it is not a repair for a leaking valve or a substitute for the valve core.
Access for Tire Pressure
Remove the cap to read or adjust pressure, then refit it gently by hand.
Kompatibilität
| Modell | Years / Version | Hinweise |
|---|---|---|
| Model 3 | Screws onto the standard valve stem thread. | |
| Model Y | Screws onto the standard valve stem thread. | |
| Model S | Screws onto the standard valve stem thread. | |
| Model X | Screws onto the standard valve stem thread. |
Fit depends on the valve stem, rather than the model name alone. No valve core replacement or TPMS function is provided.
Technische Daten
| Produkttyp | Screw-on tire valve caps |
|---|---|
| Compatible Models | Tesla Model 3 / Y / S / X, with compatible valve stems |
| Position / Location | Wheel tire valve stems |
| Material | Metal cap body with an inner rubber sealing ring |
| Farbe | Schwarz |
| Installation Type | Screw-on; hand fitting to the matching valve thread |
| Lieferumfang | 1 set of tire valve caps |
| Versandgewicht | 50 g |
What's in the Box
- 1 set of tire valve caps
Installation
- Park the vehicle and remove the existing valve cap.
- Seat the inner rubber ring, then gently screw the cap onto the valve by hand.
- Refit the cap by hand after reading the pressure.
Gut zu wissen
Achtung
- Fit gently by hand; do not force a mismatched cap or overtighten against the valve stem.
- A valve cap does not repair a leaking valve, replace the valve core or monitor tire pressure. Address leakage and pressure warnings through appropriate tire service.
Pflege
- Keep the cap threads and sealing ring clean.
- Replace a damaged cap or seal. The cap does not hold tire pressure.
FAQ
How do I fit the caps?
Remove the existing cap, then screw the replacement on gently by hand with the inner rubber ring in place. Do not force or overtighten it.
Do the caps stop a leaking valve?
They cover the valve opening and have an inner sealing ring, but do not repair a leaking valve core or damaged valve. Have leakage serviced.
Do these monitor tire pressure?
No. These are passive valve caps.
English 
German 
Spanish 