A Carbon-Weave Accent at the Top of the Rear Window
This curved roof spoiler adds a woven carbon-fiber accent along the top edge of the Model Y rear window. Choose a glossy or matte finish. The underside has pre-applied adhesive strips, and the package contains one wing. Both purchase options fit Model Y 2020–2025.03.
- Carbon Fiber
- Glossy or Matte
- Adhesive Mount
- One Roof Wing
Hauptmerkmale
-
Upper-Window Accent
A curved wing adds a carbon-weave accent across the top edge of the rear window.
-
Two Finishes
Choose the glossy or matte carbon-fiber option.
-
Specific Profile
Both options fit Model Y 2020–2025.03.
-
Adhesive Attachment
The underside has pre-applied adhesive strips for a drill-free installation.
-
One-Piece Package
The package contains one roof spoiler; a rear trunk spoiler is separate.
Highlights
Curved Window-Top Shape
The long, shaped wing follows the upper rear-window edge. Match its ends and bonding footprint to the actual vehicle before removing the adhesive backing.
Choose Your Finish
Glossy and matte carbon-fiber options provide different surface appearances. The installed photo illustrates placement.
Adhesive on the Underside
Pre-applied strips run along the mounting surface. Test-fit first and use the supplied adhesive instructions for preparation, pressure and curing before exposing the wing to driving or washing loads.
Kompatibilität
| Modell | Years / Version | Hinweise |
|---|---|---|
| Model Y | 2020–2025.03 option label | Upper rear-window edge. |
A rear trunk spoiler is a separate accessory.
Technische Daten
| Produkttyp | Roof spoiler / window top wing |
|---|---|
| Compatible Models | Model Y 2020–2025.03 (both options) |
| Position / Location | Top edge of the rear window |
| Material | Carbon fiber with a woven surface pattern |
| Surface Finish | Glossy or matte |
| Installation Type | Pre-applied adhesive strips; no drilling |
| Lieferumfang | 1 roof spoiler window top wing |
| Versandgewicht | 2.8 kg listed for either option |
What's in the Box
- 1×Roof spoiler window top wing in the selected finish
Installation
- Test-fit with all backing intact.
- Clean and dry the bonding area.
- Mark the alignment, then attach and press the entire adhesive footprint.
- The installation guidance calls for 15–30°C conditions, initial support for 24 hours and a 48–72-hour delay before washing or high-speed driving.
Gut zu wissen
Achtung
- Bond only to the specified clean, dry surface using preparation compatible with the vehicle finish and the supplied adhesive.
Pflege
- Clean gently with mild car soap and a soft cloth.
- Keep pressure-washer jets and wash brushes away from the wing edges.
FAQ
Which Model Y does it fit?
Both available options fit Model Y 2020–2025.03.
Does installation require drilling?
The pictured underside uses adhesive strips. Test-fit with the backing intact; no drilling or extra fasteners are required.
Is a rear trunk spoiler included?
No. The package contains one roof spoiler window top wing in the selected finish.
Does this wing improve range or handling?
No quantified range, drag, downforce or handling improvement is specified here. Choose it for its shape and finish.
English 
German 
Spanish 