Land Ghost LED Rear Spoiler for Tesla Model 3 and Model Y
Give the rear trunk edge a Land Ghost wing profile with an integrated wired LED brake-light strip. The ABS spoiler uses adhesive mounting and a lighting harness connection. Select the version for Model 3 Highland (2024+), Model Y (2020–2025.03) or Model 3 (2017–2023).
- Wired LED Light
- ABS Body
- 3 Vehicle Options
- Adhesive Mount
Hauptmerkmale
-
Integrated LED Brake Light
The rear spoiler combines a shaped wing with a wired LED brake-light strip
-
ABS Body
The molded ABS spoiler changes the rear trunk profile
-
Wired Connection
The LED light connects through the matching harness
-
Adhesive Mount
The spoiler attaches to the matching trunk surface with adhesive
-
Three Vehicle Options
Choose Highland 2024+, Model Y 2020–2025.03 or Model 3 2017–2023
-
Routine Care
Clean gently
Highlights
Shaped ABS Wing
The molded wing follows the rear trunk edge and changes the rear profile.
Integrated LED Strip
The red LED strip is wired into the vehicle lighting system through a matching harness.
Three Vehicle Versions
Choose Model 3 Highland 2024+, Model Y 2020–2025.03 or Model 3 2017–2023. Select by the vehicle option and actual trunk shape.
Bonding and Routine Care
Test-fit before adhesive application and let the adhesive cure.
Kompatibilität
| Modell | Years / Version | Hinweise |
|---|---|---|
| Model 3 Highland | 2024+ | |
| Model Y | 2020-2025.03 | |
| Model 3 | 2017-2023 |
Fits Model 3 Highland 2024+, Model Y 2020–2025.03 and Model 3 2017–2023, each with its own version. The Model Y option fits the earlier body design through March 2025; it does not fit Model Y Juniper.
Technische Daten
| Produkttyp | Land Ghost rear LED spoiler |
|---|---|
| Compatible Models | Tesla Model 3 Highland (2024+), Model Y (2020–2025.03) and Model 3 (2017–2023), by vehicle option |
| Position / Location | Rear trunk edge |
| Material | ABS plastic |
| Light Source | Integrated wired LED brake light |
| Installation Type | Adhesive mount plus lighting harness connection |
| Lieferumfang | Rear LED spoiler and matching LED wiring harness |
| Care Instructions | pH-neutral car soap and a soft microfiber cloth; inspect bond and LED operation |
What's in the Box
- Rear LED spoiler with LED wiring harness for the selected vehicle
Installation
- Test-fit without removing the adhesive backing. Prepare the surface using products compatible with the paint and adhesive.
- Bond in the correct position and secure with temporary holding tape. The product guidance calls for 72 hours with holding tape in place and no washing during that period; follow the actual adhesive requirements and conditions.
- Route and connect the matching harness with protected wiring. Restore panels and seals.
Gut zu wissen
Achtung
- Keep wiring protected from sharp edges, moisture, trunk hinges, seals and moving panels.
Pflege
- Clean with pH-neutral car soap and a soft microfiber cloth.
- Allow at least the stated 7-day period before washing and follow the actual adhesive curing requirements; avoid pressure or brushes that could loosen the spoiler.
FAQ
Does the LED strip require wiring?
Yes. It uses a lighting harness connection.
How long should the holding tape stay on?
The product guidance calls for 72 hours with the holding tape in place and no washing during that time. It also specifies a 7-day period before washing. Follow the actual adhesive instructions and curing conditions; these periods do not guarantee every bond or car-wash method.
Does it fit a Model Y Juniper?
No. The Model Y option fits the earlier body design, 2020–2025.03.
Is the additional light approved for every market?
No market approval is stated. The added lamp and its wiring must preserve all required vehicle lighting functions and visibility.
English 
German 
Spanish 