A Dry Carbon Fiber Dashboard Overlay for the Refreshed Model S and X
Cover the dashboard trim in your refreshed Model S or Model X 2021+ with real dry-molded carbon fiber. The two-piece overlay set has pre-applied adhesive and fitting instructions. Choose Glossy, Matte or Forged for a woven or marbled finish that suits your interior.
- Real Dry Carbon
- UV Coated
- 3 Finishes
- Peel and Stick
- Model S/X 2021+
Hauptmerkmale
-
Real Dry Carbon Fiber
Molded carbon fiber overlays add woven or marbled detail over the original dashboard trim.
-
Refresh Interior Fit
Designed for refreshed Model S and Model X 2021+ interiors, including Plaid.
-
Three Finishes
Choose reflective Glossy, subdued Matte or marbled Forged carbon fiber.
-
Coated Surface
The carbon fiber has a protective UV coating.
-
Adhesive Attachment
Pre-applied adhesive attaches the overlays without drilling.
-
Two-Piece Set
Includes two dashboard overlays and fitting instructions.
Highlights
Real Dry Carbon Fiber
Molded carbon fiber follows the dashboard trim, adding visible weave and depth over the original panel.
Choose Your Finish
Glossy has a reflective woven finish, Matte is more subdued, and Forged offers a marbled carbon fiber pattern.
Adhesive Overlays
The two overlays attach with pre-applied adhesive without drilling. Test-fit both pieces before exposing the tape.
Refresh Dashboard Shape
The set is shaped for refreshed Model S and Model X 2021+ interiors, including Plaid.
Kompatibilität
| Modell | Years / Version | Hinweise |
|---|---|---|
| Model S | 2021+ (including Plaid) | Refreshed interior |
| Model X | 2021+ (including Plaid) | Refreshed interior |
Not compatible with the 2012-2020 pre-refresh Model S and Model X.
Technische Daten
| Produkttyp | Dashboard panel overlay (2-piece set) |
|---|---|
| Compatible Models | Model S 2021+ and Model X 2021+ including Plaid; not 2012-2020 pre-refresh |
| Position / Location | Dashboard panel over the factory trim |
| Material | Authentic dry molded carbon fiber (not vinyl) with a protective UV coating |
| Surface Finish | Glossy, Matte or Forged |
| Menge | 2 overlays |
| UV / Heat Protection | Protective UV coating |
| Installation Type | Pre-applied adhesive backing; no drilling |
| Installation Time | Approx. 20–30 minutes fitting; allow 24 hours for adhesion |
| Lieferumfang | 2 dry carbon dashboard overlays with pre-applied adhesive and detailed instructions |
| Versandgewicht | 3 kg (6.61 lb) |
What's in the Box
- 2×Dry carbon dashboard overlays with pre-applied adhesive
- 1×Fitting instructions
Installation
- Clean and dry the contact surfaces with a cleaner compatible with the original trim.
- Peel a small section of the adhesive liner, align the piece and gradually remove the remaining liner while pressing along the overlay.
- Apply even pressure using a soft microfiber cloth, paying attention to edges and corners. Press for 60 seconds.
- Allow 24 hours for adhesion before cleaning or exposing the overlays to extreme heat.
Gut zu wissen
Achtung
- For refreshed 2021+ Model S and Model X interiors; not 2012–2020 pre-refresh vehicles.
- Allow 24 hours for adhesion before cleaning or exposing the overlays to extreme heat.
- Removal may leave adhesive residue or affect the original trim. Use a surface-compatible removal method and avoid overheating the dashboard.
Pflege
- Use a soft microfiber cloth and a cleaning product suitable for the overlay finish.
- For removal, use gentle heat only if compatible with the original trim. Avoid overheating; test any residue cleaner on a hidden area first.
FAQ
Will this fit the pre-2021 Model S or X?
No. It is made exclusively for the refreshed 2021+ Model S and Model X interior and will not fit the 2012-2020 cars.
Does it cause glare on the windshield?
If you are concerned about glare, choose the matte finish, which reflects less light than the glossy finish.
Can I remove the overlays later?
They are adhesive overlays. Protect the original trim from heat or incompatible cleaners. Removal may leave residue or affect the finish.
How long does installation take?
Allow approximately 20–30 minutes for fitting, followed by 24 hours for adhesion before cleaning or extreme heat exposure.
English 
German 
Spanish 