Performance-Style ABS Rear Spoiler with Carbon Pattern & Black Finishes for Tesla Model 3 / Model Y

ABS Rear Lip Spoiler in Four Finishes

Add a performance-inspired rear lip profile with an ABS spoiler for your selected Model 3 or Model Y generation. Choose a matte or glossy black finish, or a matte or glossy carbon pattern. Pre-applied adhesive tape mounts it on the rear trunk lid without drilling.

ABS Plastic
4 Finishes
Adhesive Mounting
Model-Specific Option

Hauptmerkmale

Rear Lip Profile

The spoiler follows the upper edge of the rear trunk lid.
ABS Plastic

The body is ABS, including the carbon-pattern finishes.
Four Finishes

Choose Matte Black, Glossy Black, Matte Carbon or Glossy Carbon.
Adhesive Mounting

Pre-applied adhesive tape provides the mounting method without drilled holes.
Model and Generation Options

Select the vehicle and year option as well as the finish; matching SKU letters alone is insufficient.
Dry-Fit Before Bonding

Dry-fit across the trunk contour before removing the tape backing.

Highlights

Rear Trunk Profile

The installed view shows the spoiler tracing the upper trunk edge. Dry-fit the selected version to your vehicle before bonding.

Finish Details - TESVX Spoiler — Finish Details

Matte and glossy black options sit alongside two carbon-pattern finishes. Every option uses an ABS body.

Select the Complete Option

Choose both vehicle generation and finish.

No-Drill Installation

Pre-applied adhesive tape is the mounting method. Correct surface preparation, alignment and curing remain necessary.

Kompatibilität

Modell	Years / Version	Hinweise
Model 3	2017–2023	Select this body-generation option and the finish; dry-fit rear trunk contour.
Model Y	2020–2024	Select pre-Juniper option and the finish; dry-fit rear trunk contour.
Model 3 Highland	2024 onward	Select Highland option and the finish; dry-fit rear trunk contour.
Model Y Juniper	2025 onward	Select Juniper option and the finish; SKU includes new-y. Dry-fit rear trunk contour.

Matte Black / Glossy Black / Matte Carbon / Glossy Carbon use A / B / C / D suffixes. The first three model options share TSL8318 codes; Juniper uses TSL8318-new-y codes. Model YL is outside these options.

Technische Daten

Produkttyp	Performance-style rear lip spoiler
Compatible Models	Model 3 2017–2023; Model Y 2020–2024; Model 3 Highland 2024 onward; Model Y Juniper 2025 onward
Position / Location	Rear trunk lid upper edge
Material	ABS plastic; carbon options are surface patterns
Surface Finish	Matte or glossy
Farbe	Matte Black, Glossy Black, Matte Carbon, Glossy Carbon
Menge	1 spoiler
Installation Type	Pre-applied adhesive tape; no drilling
Versandgewicht	1,200 g

What's in the Box

1×ABS rear spoiler with pre-applied adhesive tape
Surface-preparation wipe

Installation

Difficulty: Easy
Werkzeuge: Paint-compatible surface-preparation materials; clean soft cloth

Dry-fit the spoiler on the trunk lid.
Clean and dry the bonding area and remove wax, oil and dust using a paint-compatible preparation method. Follow the adhesive instructions for suitable installation conditions.
Remove the backing carefully while maintaining alignment. Press evenly along the full bonded length.
Keep the installation dry and avoid washing for the first 48 hours.

Gut zu wissen

Achtung

Choose the exact model, body generation and finish together. Several model options share SKU codes.
Prepare the surface with products compatible with the paint and follow the adhesive instructions for temperature, pressure and curing. Keep the installation dry and do not wash the vehicle for the first 48 hours.
Does not fit over another spoiler.
Adhesive removal may leave residue or affect paint, especially refinished surfaces.

Pflege

Clean gently with a soft cloth and a suitable mild car cleaner. Avoid abrasive products and concentrated pressure jets along bonded edges.
Residue-free or damage-free removal is not claimed.