A Curved Carbon-Fiber Edge for the Liftgate
This Performance-style carbon-fiber spoiler adds a raised edge to the matching Model Y liftgate. Choose the Juniper or Standard vehicle option and a Matte Carbon Fiber, Glossy Carbon Fiber or Glossy Forged Carbon Fiber finish. It mounts with pre-applied double-sided adhesive tape after dry fitting and surface preparation; one cleaning wipe and one adhesion-promoter wipe come with the spoiler.
- Liftgate Spoiler
- 3 Finishes
- Juniper / Standard Options
- Adhesive Attachment
Hauptmerkmale
-
Liftgate Styling
The spoiler adds a raised, curved edge to the matching rear liftgate.
-
Carbon-Fiber Appearance
Matte and glossy woven choices and the Glossy Forged Carbon Fiber option offer different surface patterns.
-
Two Vehicle Choices
Juniper and Standard options, each shaped to its liftgate.
-
Three Finishes
Choose Matte Carbon Fiber, Glossy Carbon Fiber or Glossy Forged Carbon Fiber.
-
Adhesive Attachment
Pre-applied double-sided automotive tape mounts the correctly matched spoiler without drilling.
-
Preparation Wipes
The package includes one cleaning wipe and one adhesion-promoter wipe with the spoiler.
Highlights
Follow the Liftgate Line
The curved spoiler follows the intended liftgate edge.
Choose the Vehicle and Finish
Select the Juniper or Standard option first, then choose matte, glossy woven or Glossy Forged Carbon Fiber.
Prepare and Bond Carefully
Dry fit before cleaning and using the supplied preparation wipes. Follow the fitting and adhesive instructions, align progressively and press evenly along the entire intended bonding surface.
Kompatibilität
| Modell | Years / Version | Hinweise |
|---|---|---|
| Model Y Juniper | 2025+ | TSL8308-newY-B matte, -A glossy or -C Glossy Forged Carbon Fiber. |
| Model Y Standard | 2025+ option | TSL8308-newY-E matte, -D glossy or -F Glossy Forged Carbon Fiber. |
Does not fit a replacement liftgate or over an existing spoiler.
Technische Daten
| Produkttyp | Performance-style carbon-fiber rear spoiler |
|---|---|
| Compatible Models | Model Y Juniper 2025+, Model Y Standard 2025+ |
| Position / Location | Rear liftgate edge |
| Material | Carbon fiber; select the woven or Glossy Forged Carbon Fiber finish option |
| Surface Finish | High gloss clear coat or matte clear coat |
| Farbe | Matte Carbon Fiber, Glossy Carbon Fiber, Glossy Forged Carbon Fiber |
| Menge | 1 spoiler |
| Installation Type | Pre-applied automotive double-sided adhesive tape; no drilling for the correctly matched part |
| Lieferumfang | 1 carbon fiber spoiler, 1 adhesion promoter wipe, 1 cleaning wipe |
| Versandgewicht | 1.2 kg (2.65 lb) shipping weight; not measured net spoiler weight |
What's in the Box
- 1×Carbon fiber spoiler
- 1×Adhesion promoter wipe
- 1×Cleaning wipe
Installation
- Remove any existing spoiler and old residue, then dry fit the spoiler with the adhesive liners in place.
- Clean and fully dry the bonding area with the cleaning wipe.
- Apply the adhesion-promoter wipe and allow it to dry.
- Expose the adhesive progressively, align the spoiler and press evenly along the entire contact line; do not force a mismatched contour into place.
- Allow the adhesive to set for its specified time before washing.
Gut zu wissen
Achtung
- Does not fit over an existing spoiler.
- The spoiler is not a handle.
Pflege
- Keep the bond dry and undisturbed during the adhesive’s specified setting period.
- Clean gently after setting and avoid abrasive pads or high-pressure water aimed at bonded edges.
FAQ
Which model option should I choose?
Offered as Juniper and Standard vehicle options.
What finishes are available?
Matte Carbon Fiber, Glossy Carbon Fiber and Glossy Forged Carbon Fiber. Select the desired finish within the correct vehicle option.
What comes in the package?
One spoiler, one adhesion-promoter wipe and one cleaning wipe. The spoiler has pre-applied double-sided adhesive tape.
Does fitting require drilling?
The correctly matched spoiler mounts with pre-applied adhesive tape. Dry fitting, surface preparation and full contact along the intended bonding path are required.
Can I bond it over an existing spoiler?
Remove the existing spoiler and old adhesive with a method suitable for the paint, then dry fit this part to the actual liftgate surface.
English 
German 
Spanish 