Four Covers for Matching Seat Rail Ends
This set of four PP caps fits over matching exposed seat rail ends to add a covered outline and help reduce direct scuff contact. They are end covers rather than a full rail enclosure or an injury-prevention device. Does not fit Berlin-built or Performance versions.
- 4 End Covers
- PP Material
- Clip-On
- Rail Profile
Hauptmerkmale
-
Seat Rail End Covers
Four caps cover matching exposed rail ends, rather than enclosing the whole sliding track
-
Rounded Cap Profile
A shaped cover adds a finished outline at the exposed end
-
PP Material
The plugs are made of PP
-
No-Tool Fit
Place or click the plugs onto the rails
-
Set Of Four
Four plugs are included
-
Clear Exclusions
Not compatible with Performance models or Berlin-built versions
Highlights
Four Shaped End Covers
The set contains four PP covers for the matching exposed rail ends. Shaped to the rail end cap, opening and mounting points.
The Retaining Structure
The underside view shows the retaining structure. Fit only where the cover seats fully without forcing it; do not stack it over a different existing factory cover.
Full Seat Travel
The installed detail shows coverage at the rail end. The covers leave the sliding track and nearby wiring clear.
Kompatibilität
| Modell | Years / Version | Hinweise |
|---|---|---|
| Model 3 | 2021+ | Matching rail ends; excludes Berlin-built and Performance versions |
| Model Y | 2020–2024 | Matching rail ends; excludes Berlin-built and Performance versions |
The Model Y row covers the explicitly described 2020–2024 configuration. Does not fit Juniper or other rail revisions.
Technische Daten
| Produkttyp | Seat slide rail end covers, set of 4 |
|---|---|
| Compatible Models | Model 3 2021+ and Model Y 2020–2024 with matching rail ends; excludes Berlin-built and Performance versions |
| Position / Location | Matching exposed seat rail ends |
| Material | PP |
| Menge | 4 pieces |
| Installation Type | Place or click onto the rails; no tools |
What's in the Box
- 4×Seat rail anti-kick plugs
Installation
- Place or click a matching cover onto each rail end without forcing it. Do not remove rail fasteners or disconnect under-seat wiring.
Gut zu wissen
Achtung
- Performance and Berlin-built versions are excluded.
- The caps are not an injury-prevention device.
Pflege
- Remove a loose or interfering cover before using the seat movement.
FAQ
Which Tesla models are these anti-kick plugs compatible with?
The applications here are Model 3 2021+ and Model Y 2020–2024 with matching rail ends. Performance and Berlin-built versions are excluded. Does not fit Juniper or other rail revisions.
How are they installed?
Installation is simple. Place or click them directly onto the rails. No tools are needed.
What are they made of?
The plugs are made of PP.
English 
German 
Spanish 