Folding Tabletop Tripod for Starlink Mini
This black tripod combines folding aluminum alloy legs, an iron base and an adjustable ball head. Use the compatible adapter connection to mount Starlink Mini for a stationary tabletop or campsite setup. Matching 1/4-inch and 3/8-inch screw-adapter interfaces also support suitable device-mount configurations.
- Folding Legs
- Adjustable Ball Head
- Metal Construction
- Thread Adapter Mount
Hauptmerkmale
-
Adjustable Ball Head
Rotate the head and adjust its tilt, then lock the chosen position.
-
Folding Legs
The three support legs fold together for carrying and storage.
-
Metal Construction
Aluminum alloy legs and an iron base form the support structure.
-
Thread Adapter Compatibility
The mount works with matching 1/4-inch and 3/8-inch screw-adapter interfaces.
-
Mini Adapter Connection
Mount Starlink Mini through the compatible pipe-adapter connection shown in the installation guide.
-
Tabletop Deployment
Position the tripod on a level, stable surface for a stationary setup with a clear sky view.
Highlights
Compact Tripod Structure
The three legs spread beneath the adjustable ball head and fold together for storage.
Mini Adapter Assembly
The installation view shows the tripod connecting through the Mini pipe adapter. Assemble with the supplied adapter and fastener.
Set and Lock the Angle
Adjust the head rotation and tilt, then tighten the lock. The angle locks to hold the device in position.
Stationary Placement
Use a stable tabletop or level ground and leave a clear cable route. Starlink sky view and connection status show in the app.
Kompatibilität
| Modell | Years / Version | Hinweise |
|---|---|---|
| Starlink Mini | Use the compatible Mini pipe adapter and tripod fastener shown in the installation guide. | |
| Other devices | Requires suitable device holder / adapter with matching 1/4-inch or 3/8-inch interface and load suitability. |
This is a freestanding support; it does not add vehicle attachment or power functions.
Technische Daten
| Produkttyp | Portable folding tripod with ball head |
|---|---|
| Compatible Models | Starlink Mini through compatible adapter; other devices with matched mount interfaces |
| Material | Aluminum alloy legs and iron base |
| Farbe | Schwarz |
| Abmessungen | Leg length: 6.39 in (approximately 16.2 cm) |
| Thread Size | 1/4-inch and 3/8-inch screw-adapter compatibility |
| Installation Type | Freestanding tripod with threaded adapter mounting |
| Model / Version | SKU SMM004 |
Installation
- Unfold the tripod legs on a flat, stable surface.
- Follow the shown adapter sequence: fit the tripod adapter into the Mini pipe adapter, insert the matching fastener and secure the connection. Do not force an incompatible thread.
- Attach the assembled adapter to Mini using its intended mounting connection. For another device, use its suitable holder and mount interface.
- Adjust and lock the ball head while supporting the device. Route the cable clear of snagging.
Gut zu wissen
Achtung
- Mount with the Mini pipe adapter, tripod fastener and thread interface. A matching screw size alone does not establish load or device compatibility.
- Use a flat, stable surface and secure every mounting connection and the ball-head lock.
- This freestanding tripod does not provide a fixed vehicle or boat installation. Remove and store it before the vehicle or vessel moves.
- Recheck the setup in wind or when the surface changes. Keep it away from edges, traffic, moving parts and cable snagging.
- The terminal, device holders and power equipment are separate.
Pflege
- Wipe clean and dry after use. Store away from moisture and inspect metal parts for corrosion.
- Inspect screws, adapter seating, leg joints and the ball-head lock before each setup.
- Remove the mounted device before folding or carrying the tripod.
FAQ
Does Mini attach directly to any screw?
Use the compatible Mini pipe adapter and matching tripod fastener shown in the installation guide.
Which screw adapters are supported?
The mount supports matching 1/4-inch and 3/8-inch screw-adapter interfaces. The device holder, load and contact geometry must also suit the setup.
Can I leave it mounted on a moving vehicle?
This freestanding tripod is for stationary deployment. It does not provide a fixed vehicle or boat attachment; remove and store the equipment before moving.
What does the 6.39-inch dimension describe?
It is the stated leg length, approximately 16.2 cm. It is not the total deployed height or footprint.
Does it include Starlink Mini or power equipment?
The terminal and power equipment are separate from this mount.
English 
German 
Spanish 