TESVXtesvx.com
Quelle: https://tesvx.com/de/product/magnetic-quick-release-car-roof-mount-for-starlink-mini/
0

Bewertungen

Noch keine BewertungenTeilen Sie als Erster Ihre Erfahrungen mit diesem Produkt.

Technische Daten

ProdukttypMagnetic roof mount
MaterialEdelstahl
FarbeBlack or White
AbmessungenApproximate frame height 4.3 cm (1.7 in)
InstallationsmethodeMagnetic surface attachment; screw and locating nub secure the Mini to the frame
Versandgewicht200 g (0.44 lb)
HoldRubber-coated magnets, up to 100 lb vertical pull force

Details

Magnetic Starlink Mini Frame for a Parked Steel-Surface Setup

This low-profile frame is listed for Starlink Mini and attaches to suitable steel with rubber-coated magnets. The supplied screw and locating nub secure the Mini to the frame. Black and White options are available. It is for stationary use and has no in-motion retention or speed rating.

  • Starlink Mini
  • Magnetic Steel-Surface Base
  • Black or White
  • Stationary Use

Hauptmerkmale

  1. Magnetischer Sockel

    Rubber-coated magnets attach the frame to a suitable ferromagnetic steel surface.

  2. Starlink Mini Frame

    The shaped frame is listed for Starlink Mini and uses the supplied screw and locating nub to secure the device.

  3. Stahlkonstruktion

    The frame is described as stainless steel with a low-profile shape.

  4. Rubber-Coated Contact Points

    The coating separates the magnet faces from the mounting surface; clean both surfaces before attachment.

  5. Black or White

    The two listed color options have the same described mounting method.

  6. Parked Setup Only

    For stationary use only; the mount has no in-motion speed or retention rating.

Highlights

Black Frame - TESVX Starlink Mini Roof Mount
Black Frame

The black frame has shaped supports and magnetic contact points for a suitable steel surface. The roof illustration does not establish compatibility with every roof or roof rack.

White Frame - TESVX Starlink Mini Roof Mount
White Frame

The white option uses the same frame and magnetic mounting method on a steel surface.

Separate Frame and Device Fastening

The magnets attach the frame to steel; the screw and locating nub secure the Mini to the frame. Both connections must be stable before stationary use.

Kompatibilität

Modell Years / Version Hinweise
Starlink Mini Suitable flat ferromagnetic steel surface only; stationary vehicle setup. Glass or aluminum roofs are not direct magnetic mounting surfaces.

Listed for the Starlink Mini device, with no vehicle-specific fit. It does not mount magnetically on a Tesla glass roof.

Technische Daten

Produkttyp Magnetic mounting frame for Starlink Mini
Compatible Models Starlink Mini; suitable ferromagnetic steel mounting surface required
Position / Location Flat steel mounting surface on a stationary vehicle
Material Stainless steel with rubber-coated magnets
Farbe Black or White
Abmessungen Approximate frame height 4.3 cm (1.7 in)
Installation Type Magnetic surface attachment; screw and locating nub secure the Mini to the frame
Versandgewicht 200 g (0.44 lb)

What's in the Box

  • Magnetic mounting frame with the screw and locating nub described for securing Starlink Mini
  • Starlink Mini and service plan are not part of this mount listing

Installation

Difficulty
Moderate
  1. Park the vehicle and select a stable, flat steel surface with a clear view of the sky for the Mini.
  2. Clean the mounting surface and magnet coatings, then attach the frame.
  3. Secure the Mini using the supplied screw and locating nub and route its cable without pinching or tension.

Gut zu wissen

Achtung
  • For stationary use only; no in-motion retention or speed rating.
  • Magnets require ferromagnetic steel. Glass roofs, including a Tesla glass roof, aluminum panels and plastic surfaces do not provide magnetic attachment.
  • A vertical pull-force claim is not a vehicle load or speed rating. No tested holding-force value is established for this exact installation.
  • Keep the contact surfaces clean. Rubber coating does not guarantee scratch-free contact or protect against trapped grit.
Pflege
  • Inspect magnets, coating and fasteners before each use. Keep grit away from the contact surfaces and lift the mount carefully when removing it.

FAQ

Can it attach directly to a glass or aluminum roof?

No. The magnets require suitable ferromagnetic steel. A glass, aluminum or plastic roof is not a direct magnetic attachment surface.

Can I drive with this mount installed?

No. The mount has no in-motion retention or speed rating and is for stationary use only.

Does the rubber coating prevent all paint scratches?

No scratch-free guarantee is established. Trapped grit, damaged coating or movement can mark the surface; clean and inspect both contact surfaces.

Is Starlink Mini included?

This listing is for the mounting frame. The Starlink Mini device and its service plan are separate.

Empfehlungen

Technische Daten auswählen

Lieferung

Versand in 1-3 Werktagen

Free shipping on eligible orders of US$149 or more

Zahlungsmethoden

  • PayPalPayPal
  • Debit- & KreditkartenVisaMastercardAmerican Express
  • Apple PayApple Pay
  • Google PayGoogle Pay
  • BancontactBancontact
  • BlikBlik
  • EPSEPS
  • iDealiDeal
  • MyBankMyBank
  • Przelewy24Przelewy24
  • TrustlyTrustly
  • MultibancoMultibanco

Die verfügbaren Methoden können je nach Währung und Rechnungsland variieren; die endgültige Liste wird an der Kasse angezeigt.

Service

  • Sichere Kasse

    Zahlungen werden über eine verschlüsselte Verbindung abgewickelt.

  • After-Sales-Support

    Kontaktieren Sie uns bei Fragen zur Installation oder Verwendung.

Technische Daten

Produkttyp
Magnetic roof mount
Material
Edelstahl
Farbe
Black or White
Abmessungen
Approximate frame height 4.3 cm (1.7 in)
Installationsmethode
Magnetic surface attachment; screw and locating nub secure the Mini to the frame
Versandgewicht
200 g (0.44 lb)
Hold
Rubber-coated magnets, up to 100 lb vertical pull force

Bewertung schreiben

Stainless Steel Magnetic Quick-Release Roof Mount with 100 lb Pull Force for Starlink Mini
Gesamtbewertung *
Was ist Ihnen besonders aufgefallen?optional, bis zu 3
Fotos hinzufügen0 / 5
JPG, PNG oder WebP, jeweils bis zu 5 MB.

Bewertungen werden vor der Veröffentlichung geprüft. „Verifizierter Kauf“ wird automatisch hinzugefügt, wenn Ihre E-Mail-Adresse mit einer Bestellung übereinstimmt.

TESVX product image
Stainless Steel Magnetic Quick-Release Roof Mount with 100 lb Pull Force for Starlink Mini

US$80.00

In den Warenkorb Dieses Produkt weist mehrere Varianten auf. Die Optionen können auf der Produktseite gewählt werden