Mirror-Like Gloss and Hydrophobic Protection for Your Paint
This kit pairs a 60 ml graphene ceramic paint coating with a 60 ml prep degreaser. It is designed for a glossy, water-beading finish on prepared vehicle paint. A spray nozzle, microfiber towel and protective gloves are listed in the kit contents.
- 60 ml Coating
- 60 ml Degreaser
- High-Gloss Finish
- Paint Preparation
Hauptmerkmale
-
Graphene Ceramic Coating
A paint coating marketed as 12H graphene ceramic coating
-
Hydrophobic Finish
Designed to encourage water beading on treated paint
-
High-Gloss Look
Intended to give the clear coat a glossy finish
-
Prep Degreaser Included
60 ml degreaser for removing wax and oil before coating
-
Coating and Accessories
60 ml coating, 60 ml degreaser, spray nozzle, microfiber towel and protective gloves
-
Two-Phase Application
Prepare the paint, then apply the coating and allow it to cure
Highlights
A Glossy Finish
The coating is intended to add a glossy finish to prepared vehicle paint; it does not replace paint correction.
Prepare the Paint First
The included degreaser removes wax and oil so the coating goes onto clean, completely dry paint.
Apply by Hand
Spread the coating using an applicator pad in a cross-hatch motion, following the supplied product directions.
Kompatibilität
| Modell | Years / Version | Hinweise |
|---|---|---|
| Universal | For vehicle paint |
Technische Daten
| Produkttyp | 12H graphene ceramic coating and degreaser kit |
|---|---|
| Compatible Models | Vehicle paint |
| Surface Finish | High-gloss, mirror-like wet-look shine |
| Kapazität | 60 ml coating + 60 ml degreaser (2 fl oz each) |
| Installation Type | DIY hand application with applicator pad |
| Lieferumfang | Coating, degreaser spray, spray nozzle, microfiber towel, protective gloves |
| Care Instructions | 30 min initial dry, 2 h touch-dry, 48 h full cure; avoid washing and heavy rain during cure |
| Versandgewicht | 200 g (0.44 lb) |
| Coating Description | Graphene ceramic paint coating, marketed as 12H |
What's in the Box
- 1×12H Graphene Ceramic Coating (60 ml)
- 1×Paint Prep Degreaser Spray (60 ml)
- 1×Spray Nozzle
- 1×Microfiber Polishing Towel
- 1×Pair of Protective Gloves
Installation
- Wash the vehicle thoroughly and lightly dry it with a microfiber towel.
- Spray the degreaser evenly over the paint, wait 1 minute, then wipe back and forth with a dry, clean cloth.
- Rinse with clean water and dry the paint completely.
- Apply a few generous drops of coating to the applicator pad.
- Wipe the coating onto the paint in a back-and-forth, cross-hatch motion for even coverage.
- Let it dry: about 30 minutes for initial drying, 2 hours to touch-dry and 48 hours to fully cure.
Gut zu wissen
Achtung
- Avoid washing the vehicle or exposing it to heavy rain for 48 hours after application.
- Apply only to clean, completely dry, degreased paint.
- Polish out deep scratches before coating; this product protects rather than corrects.
Pflege
- Avoid washing the car or exposing it to heavy rain during the 48-hour curing window.
FAQ
Why do I need to use the degreaser first?
The degreaser removes wax, oil and polish residue to prepare the clear coat for coating.
How long is the curing period?
The supplied instructions list about 30 minutes for initial drying, 2 hours to touch-dry and 48 hours for full curing. Avoid washing and heavy rain during the 48-hour curing window.
Is one kit enough for my whole car?
The source describes one 60 ml coating bottle as typically enough for a standard midsize sedan or SUV; coverage varies with vehicle size and application.
Will this remove existing scratches?
It is a protective coating, not a scratch-removal product. Polish out deep scratches before coating if correction is needed.
English 
German 
Spanish 