Silicone Cup Holder Insert for Model 3 and Model Y
This molded silicone insert sits inside the center console cupholder on the listed Model 3 2021–2023.10 and Model Y 2020–2025.03 versions. Raised contact points sit around suitable cup bases, and the insert lifts out for cleaning.
- Silicone Insert
- Cup Contact Points
- Removable for Cleaning
- Listed Console Versions
Hauptmerkmale
-
Console Insert
The molded profile sits inside the matching center console cupholder.
-
Silicone Contacts
Raised bumps contact suitable cup bases within the wells.
-
Listed Vehicle Range
Model 3 2021–2023.10 and Model Y 2020–2025.03.
-
Removable Cleaning
Lift the insert out and rinse it away from the vehicle.
-
Dry Before Refitting
Dry the insert and console area after cleaning or a spill.
Highlights
Console Profile
Seat the insert in the matching cupholder area without forcing the rim or nearby covers. The arrows in the image illustrate the insertion direction.
Raised Cup Contacts
Internal silicone bumps contact suitable cup bases.
Remove Drinks Carefully
A tight-fitting cup can pull against the insert. The insert is not a spill-proof lock.
Rinse Outside the Vehicle
Remove the insert, rinse it under water away from the console, then dry it and the console area before refitting.
Kompatibilität
| Modell | Years / Version | Hinweise |
|---|---|---|
| Model 3 | 2021–2023.10 | Center console cupholder |
| Model Y | 2020–2025.03 | Center console cupholder |
Does not fit Model 3 Highland or Model Y Juniper.
Technische Daten
| Produkttyp | Silicone center console cup holder insert |
|---|---|
| Compatible Models | Model 3 2021–2023.10 / Model Y 2020–2025.03 |
| Position / Location | Center console cupholder area |
| Material | Silicone |
| Care Instructions | Remove, rinse outside the vehicle and dry before refitting |
| Versandgewicht | 450 g (0.99 lb); shipping weight, not net product weight |
Installation
- Seat the insert gently without forcing it.
- Test the actual cup fit and remove the drink carefully.
Gut zu wissen
Achtung
- A tight cup may lift the insert. This insert does not prevent spills during braking, turns or impacts.
- Remove the insert before rinsing and keep water away from console electronics.
Pflege
- Remove and rinse outside the vehicle. Dry fully before refitting and clean console spills promptly.
FAQ
Does it fit Highland or Juniper?
The listed fitment is Model 3 2021–2023.10 and Model Y 2020–2025.03. It does not fit Highland or Juniper.
Will it always stay in place when I lift a cup?
No. A tight cup may pull on the insert.
Does it prevent spills?
No. Use stable cups with suitable closed lids; braking, turns and impacts can still cause spills.
How should I clean it?
Lift it out, rinse away from the console electronics and dry before refitting.
Is 450 g net product weight?
450 g is shipping weight; net weight is not listed.
English 
German 
Spanish 