A Raised GT-Style Rear Wing for the Highland
Give the rear of your Model 3 Highland (2024+) the raised GT-style profile shown in the product photos. The carbon-fiber spoiler is supplied as one wing in Glossy Carbon Fiber, Matte Carbon Fiber or Forged Carbon Fiber. It uses adhesive mounting without drilling.
- Highland 2024+
- Carbon Fiber
- 3 Finishes
- Adhesive Mounting
Hauptmerkmale
-
Highland application
for the Model 3 Highland 2024+ rear trunk geometry
-
Raised GT-style profile
a wing shape across the rear trunk area
-
Carbon-fiber construction
a carbon-fiber wing with a finished surface
-
Three finishes
Glossy Carbon Fiber, Matte Carbon Fiber or Forged Carbon Fiber
-
Adhesive mounting
uses automotive tape and/or the specified adhesive without drilling
-
One wing supplied
one rear spoiler in the selected finish
Highlights
Raised Wing Profile
The spoiler spans the rear trunk area with an elevated center section and shaped ends. The raised profile changes the appearance of the Highland rear silhouette.
Mounting Ends
The installed detail shows the mounting end and the clearance beneath the wing, shaped to the Highland trunk contour.
Highland Rear Styling
The installation photo illustrates the raised rear-wing silhouette on a Highland. Other body accessories visible on the car are not included with this spoiler.
Choose the Carbon Finish
Select Glossy Carbon Fiber, Matte Carbon Fiber or Forged Carbon Fiber. The woven and forged options have different surface patterns; choose the finish from the current product options.
Kompatibilität
| Modell | Years / Version | Hinweise |
|---|---|---|
| Model 3 Highland | 2024+ | Tailgate trunk lip; pre-2024 Model 3 not compatible |
Fits Model 3 Highland 2024+. Does not fit the pre-facelift Model 3.
Technische Daten
| Produkttyp | GT-style carbon-fiber rear spoiler wing |
|---|---|
| Compatible Models | Model 3 Highland (2024+) |
| Position / Location | Tailgate trunk lip, rear |
| Material | Carbon fiber |
| Surface Finish | Glossy Carbon Fiber / Matte Carbon Fiber / Forged Carbon Fiber |
| Menge | 1 spoiler |
| Installation Type | Add-on overlay with double-sided automotive tape and/or adhesive; no drilling |
| Drilling Required | Nein |
| Care Instructions | Hand wash with pH-neutral shampoo; avoid high-pressure spray at the adhesive edges |
| Versandgewicht | 1.2 kg |
What's in the Box
- 1×GT-style carbon fiber rear spoiler
Installation
- Dry-fit the spoiler on the Highland trunk contact areas.
- Prepare the surface using paint-compatible materials, following the actual tape or adhesive instructions.
- Bond the spoiler as specified and allow the full required cure time.
Gut zu wissen
Achtung
- For Model 3 Highland 2024+ rear trunk geometry; not the pre-facelift Model 3.
- Use paint-compatible surface preparation and follow the instructions for the actual tape or adhesive, including cure time.
- Avoid directing high-pressure spray at the bonded edges.
Pflege
- Hand wash gently with pH-neutral automotive shampoo.
- Avoid pressure-wash spray at the bonded edges.
FAQ
Does it fit the older Model 3?
No. This version is for the 2024+ Model 3 Highland rear trunk geometry.
Which finishes can I choose?
Glossy Carbon Fiber, Matte Carbon Fiber and Forged Carbon Fiber are the current options.
Are the other body parts in the photos included?
No. The package contains one GT-style rear spoiler in the selected finish; other accessories visible on the car are not included.
How should it be bonded?
With the specified automotive tape or adhesive, following its preparation and cure-time instructions.
English 
German 
Spanish 