Choose the PPF Pattern and Finish for Your Model Y
This pre-cut TPU film kit covers selected painted body panels on five Model Y versions. Choose the Model Y, Juniper, Juniper Performance, Standard or YL pattern, then select an available glossy or matte finish. Piece counts vary by body version, and an installation tool kit is included. Wet installation.
- Pre-Cut TPU
- Version-Specific
- Glossy or Matte
- Tool Kit Included
Hauptmerkmale
-
Choose the Body Version
Separate older Model Y, Juniper, Juniper Performance, Standard and YL patterns.
-
Finish Selection
Glossy is offered for each listed body version; Juniper and Juniper Performance also have matte options to change the surface appearance.
-
Version-Based Piece Counts
The source lists 38 pieces for Model Y, 26 for Juniper, 32 for Juniper Performance, 31 for Standard and 29 for YL.
-
Body-Panel Groups
Front bumper, front end, left side, right side and rear body groups are listed.
-
Tools Included
An installation tool kit is included and shown with bottles, a cloth and a squeegee; preparation materials and suitable slip solution are still needed.
-
Wet Application
Panel preparation, alignment, squeegee work and edge finishing are essential, particularly on complex bumper contours.
Highlights
Included Installation Tools
The included tool kit is shown with bottles, a cloth and a squeegee. Obtain suitable preparation materials and slip solution; the pictured bottles do not establish that mixed installation fluid is supplied.
Coverage by Body Version
The listed groups cover front bumper, front end, left side, right side and rear body panels. The five versions have different pieces.
Select an Available Finish
Glossy is available for the older Model Y, Juniper, Juniper Performance, Standard and YL. Matte is also available for Juniper and Juniper Performance; it is not listed for the other three versions.
Kompatibilität
| Modell | Years / Version | Hinweise |
|---|---|---|
| Model Y | 2020–2024 | 38 film pieces; glossy; TPP001-GoldY. |
| Model Y Juniper | 2025+ | 26 film pieces; glossy TPP001-GY or matte TPP001-MY. |
| Model Y Juniper Performance | 2025+ | 32 film pieces; glossy TPP001-GYP or matte TPP001-MYP. |
| Model Y Standard | 2026+ | 31 film pieces; glossy; TPP001-GYS. |
| Model YL | 2026+ | 29 film pieces; glossy; TPP001-GYL. |
Each option is cut for its own body style and bumper shape. Body-panel coverage does not include glass, light lenses or sensor areas.
Technische Daten
| Produkttyp | Pre-cut full-car paint protection film kit |
|---|---|
| Compatible Models | Model Y 2020–2024; Juniper and Juniper Performance 2025+; Standard and YL 2026+ by selected pattern |
| Position / Location | Selected painted body panels: front bumper, front end, left side, right side and rear body |
| Material | TPU |
| Surface Finish | Glossy for all five body versions; matte also offered for Juniper and Juniper Performance |
| Menge | Model Y 38; Juniper 26; Juniper Performance 32; Standard 31; YL 29 pre-cut film pieces |
| Dicke | Nominal 8.5 mil (approximately 0.22 mm) |
| Installation Type | Wet application |
| Care Instructions | Keep dry for at least 8–12 hours after fitting |
What's in the Box
- Front bumper film kit
- Front end film kit
- Left side film kit
- Right side film kit
- Rear body film kit
- Installation tool kit
Installation
- Prepare suitable painted panels using the supplied film guidance.
- Wet the panel and adhesive side with suitable slip solution, then align the correct pre-cut pattern.
- Tack reference points and squeegee solution and air outward without overstretching; finish edges carefully.
- Keep the vehicle dry for at least 8–12 hours.
Gut zu wissen
Achtung
- Different versions are not interchangeable.
- Fit only the correct film patterns to the intended painted panels. Keep cameras, sensors, lights and their required clearances unobstructed.
- Film cannot prevent dents, severe impacts or every paint mark.
Pflege
- Keep dry for at least 8–12 hours after fitting.
FAQ
Is matte available for every listed version?
No. Matte is listed for Juniper and Juniper Performance. The older Model Y, Standard and YL have glossy choices.
Does one pattern fit all Model Y versions?
No. Each version has its own pattern. The listed film counts are 38, 26, 32, 31 and 29 for Model Y, Juniper, Juniper Performance, Standard and YL respectively.
What coverage is listed?
Front bumper, front end, left side, right side and rear body film groups, plus an installation tool kit. Glass, lights and sensor areas are not included.
Can the film prevent dents or guarantee self-repair?
No. It adds a layer over painted body panels, but cannot prevent dents, severe impacts or every paint mark.
English 
German 
Spanish 