TESVXtesvx.com
Quelle: https://tesvx.com/de/product/leveling-novapads-air-foam-mattress-pro-tesla-model-y-juniper/
0

Bewertungen

Noch keine BewertungenTeilen Sie als Erster Ihre Erfahrungen mit diesem Produkt.

Technische Daten

ProdukttypCar mattress
Vehicle CompatibilityModel Y (2021-2024); Model Y Juniper (2025+)
MaterialTPU surface
Dicke14–15 cm (5.5–5.9 in) of separation from the cargo floor
InstallationsmethodeFold the seats, unroll, inflate and adjust; no tools
Lieferumfang1 mattress, 1 storage bag, 1 removable sheet, 1 user manual
Versandgewicht7.53 kg (16.6 lb)
BauweiseAir and foam hybrid with integrated leveling base (about 12 degrees to level)
PumpeBuilt-in 6000Pa pump powered by the 12 V outlet; deflation about 50-60 seconds

Details

Contoured Air-Foam Mattress for Model Y Camping

Create a parked sleeping area across the folded rear seats and cargo floor with a contoured air-and-foam mattress. A shaped leveling base accommodates the seat incline, while adjustable air firmness and a removable sheet complete the sleeping surface. Select original Model Y or Juniper; the built-in pump is specified for 12V power.

  • Air + Foam
  • Contoured Base
  • Integrierte Pumpe
  • Removable Sheet

Hauptmerkmale

  1. Contoured leveling base

    The shaped lower profile accommodates the incline of the folded rear seats.

  2. Air-and-foam construction

    Adjust the air firmness while a foam layer cushions the sleeping surface.

  3. Approximate 14–15 cm depth

    The hybrid profile provides a deeper mattress than a flat thin pad.

  4. Integrated pump

    The built-in 6000Pa pump is specified for 12V power.

  5. Two cabin versions

    Select original Model Y 2021–2024 or refreshed Juniper 2025+ by the vehicle option.

  6. Removable sheet

    The included sheet can be removed and washed.

  7. Packed storage

    Deflate and roll the mattress into its storage bag.

Highlights

Air Firmness and Foam Layer - TESVX Car Mattress
Air Firmness and Foam Layer

Adjust the air to suit the sleeping firmness while the foam layer cushions contact. The approximate profile depth is 14–15 cm; comfort varies by setup.

Pack Into the Bag

Deflate and roll the mattress for storage in the included bag.

Parked Sleeping Layout

The mattress extends across the folded-seat and cargo area.

Integrated Pump

The pump is built into the mattress and specified for 12V power. Newer Model Y outlets supply about 16V.

Kompatibilität

Modell Years / Version Hinweise
Tesla Model Y 2021–2024 Original-generation cabin option.
Tesla Model Y Juniper 2025+ Refreshed-cabin option; the pump is specified for 12V.

The same TMT07 SKU appears on both options; select by the full vehicle-generation label. Physical mattress fit does not establish pump compatibility with every vehicle outlet.

Technische Daten

Produkttyp Contoured air-foam camping mattress with built-in pump
Compatible Models Model Y (2021–2024), Model Y Juniper (2025+)
Position / Location Rear cargo area with rear seats folded
Material TPU, with foam comfort layer
Menge 1 mattress
Dicke 14–15 cm (5.5–5.9 in) of separation from the cargo floor
Leistung Built-in 6000Pa pump, specified for 12V power
Installation Type Fold the seats, unroll, inflate and adjust; no tools
Care Instructions Machine wash the removable sheet
Versandgewicht 7.53 kg (16.6 lb)

What's in the Box

  • 1×NovaPads mattress
  • 1×Aufbewahrungstasche
  • 1×Removable sheet
  • 1×Bedienungsanleitung

Installation

Difficulty
Easy
Zeit
Allow time to position and adjust firmness
Werkzeuge
Power source approved for the actual pump input and current
  1. Park on suitable ground, move the front seats as needed and fold the rear seats using the vehicle instructions.
  2. Unroll the selected mattress across the folded seats and cargo floor.
  3. Connect the pump to a 12V power source.
  4. Inflate according to the supplied manual, adjust firmness and fit the removable sheet.
  5. Disconnect and deflate for packing.

Gut zu wissen

Achtung
  • For use as a bed while parked.
  • Newer Model Y low-voltage outlets can supply about 16V. Do not connect a 12V-only pump unless its actual rating permits the outlet voltage.
  • Use only a power source approved for the pump’s rated input and current. Stop if the connector or pump overheats.
  • The shaped base does not level the vehicle or guarantee a flat sleeping surface on sloping ground.
Pflege
  • Remove the sheet and wash it; dry it before refitting.
  • Clean and dry the mattress before rolling; avoid punctures and keep moisture away from the pump and connector.

FAQ

Does auto-leveling mean the car or mattress has a powered leveling mechanism?

The leveling feature is a shaped base intended to accommodate the folded-seat incline. It does not level the vehicle or guarantee a flat bed on sloping ground.

Can I plug the pump directly into every Model Y outlet?

No. The pump is specified as 12V, while newer Model Y outlets can supply about 16V.

Is a separate air pump needed?

A 6000Pa pump is integrated into the mattress.

Which vehicle version should I choose?

Choose Model Y 2021–2024 for the original cabin, or Model Y Juniper 2025+ for the refreshed cabin.

What is included?

The package contains one mattress, one storage bag, one removable sheet and one user manual.

Empfehlungen

Technische Daten auswählen

Lieferung

Versand in 1-3 Werktagen

Free shipping on eligible orders of US$149 or more

Zahlungsmethoden

  • PayPalPayPal
  • Debit- & KreditkartenVisaMastercardAmerican Express
  • Apple PayApple Pay
  • Google PayGoogle Pay
  • BancontactBancontact
  • BlikBlik
  • EPSEPS
  • iDealiDeal
  • MyBankMyBank
  • Przelewy24Przelewy24
  • TrustlyTrustly
  • MultibancoMultibanco

Die verfügbaren Methoden können je nach Währung und Rechnungsland variieren; die endgültige Liste wird an der Kasse angezeigt.

Service

  • Sichere Kasse

    Zahlungen werden über eine verschlüsselte Verbindung abgewickelt.

  • After-Sales-Support

    Kontaktieren Sie uns bei Fragen zur Installation oder Verwendung.

Technische Daten

Produkttyp
Car mattress
Vehicle Compatibility
Model Y (2021-2024); Model Y Juniper (2025+)
Material
TPU surface
Dicke
14–15 cm (5.5–5.9 in) of separation from the cargo floor
Installationsmethode
Fold the seats, unroll, inflate and adjust; no tools
Lieferumfang
1 mattress, 1 storage bag, 1 removable sheet, 1 user manual
Versandgewicht
7.53 kg (16.6 lb)
Bauweise
Air and foam hybrid with integrated leveling base (about 12 degrees to level)
Pumpe
Built-in 6000Pa pump powered by the 12 V outlet; deflation about 50-60 seconds

Bewertung schreiben

Auto-Leveling Air-Foam Car Mattress with Built-In 12V Pump for Tesla Model Y / Model Y Juniper
Gesamtbewertung *
Was ist Ihnen besonders aufgefallen?optional, bis zu 3
Fotos hinzufügen0 / 5
JPG, PNG oder WebP, jeweils bis zu 5 MB.

Bewertungen werden vor der Veröffentlichung geprüft. „Verifizierter Kauf“ wird automatisch hinzugefügt, wenn Ihre E-Mail-Adresse mit einer Bestellung übereinstimmt.

TESVX product image
Auto-Leveling Air-Foam Car Mattress with Built-In 12V Pump for Tesla Model Y / Model Y Juniper

Ursprünglicher Preis war: US$389.00Aktueller Preis ist: US$359.00.

In den Warenkorb Dieses Produkt weist mehrere Varianten auf. Die Optionen können auf der Produktseite gewählt werden