RGB Ambient Lighting for Selected Cabin Zones
Add RGB illumination at the selected steering-wheel, air-vent and cup-holder zones. Factory-color sync, custom color and music-reactive modes are available for a matched kit and compatible vehicle system. Pictures showing all zones illustrate a combined setup.
- Factory-Color Sync
- Custom Color
- Music Reactive
- Choose Your Zones
Hauptmerkmale
-
Factory-color sync mode
Follow the vehicle’s existing ambient-light color when connected to a compatible factory system.
-
Custom-color mode
Choose a separate lighting color using the controls supplied for the actual kit.
-
Music-reactive mode
A reactive lighting mode is available; effect depends on the connected system and setup.
-
Zone choices
Select steering-wheel, air-vent or cup-holder lighting, a listed two-zone combination, or the three-zone set.
-
Vehicle/stalk options
Highland options are split into Without Stalk (2024–2025.09) and With Stalk (2025.10+).
-
Plug-in harness installation
Use the matched connectors and kit instructions; do not cut or improvise vehicle wiring.
Highlights
Steering-Trim Lighting Example
The illuminated trim follows the wheel controls and lower spoke in the example.
Cup-Holder Ring Lighting
The cup-holder zone adds two illuminated rings in the console example. Choose the cup-holder kit or a listed combination that includes this zone.
Air-Vent Zone
Choose the air-vent lighting zone or a listed combination that includes it.
Sync or Separate Color
Use factory-color sync with a compatible existing system, or select custom and reactive modes as supported by the actual kit controls.
Kompatibilität
| Modell | Years / Version | Hinweise |
|---|---|---|
| Model 3 Highland | Without Stalk option: 2024–2025.09 | Without-stalk steering wheel |
| Model 3 Highland | With Stalk option: 2025.10+ | With-stalk steering wheel |
| Model Y Juniper | 2025+ | Air-vent/cup-holder options |
| Model YL | 2026+ | Air-vent/cup-holder options |
The selector labels distinguish the Highland stalk versions. Factory-color sync works with the existing factory ambient-light system.
Technische Daten
| Produkttyp | Factory-sync RGB ambient light kit for steering wheel, air vents and cup holder |
|---|---|
| Compatible Models | Model 3 Highland, Model Y Juniper, Model YL (steering wheel kit by build date for Highland) |
| Position / Location | Steering wheel, air vents and cup holder, any combination |
| Farbe | RGB; factory color sync or custom color |
| Connector Type | Factory connectors, no wire cutting |
| Light Source | RGB LED |
| Lighting Modes | Factory color sync, custom color, music reactive |
| Installation Type | Plug-in install with factory clip points; photo and video instructions provided |
What's in the Box
- 1×Ambient-light kit for the selected zone combination
Installation
- Fit only the matched trim and connectors without cutting wiring or interfering with airbags, controls or moving parts.
- Restore power according to the vehicle procedure.
Gut zu wissen
Achtung
- Highland steering-wheel kits come in Without Stalk and With Stalk versions.
- Keep airbags and their covers, deployment seams, wheel controls, vents and moving parts unobstructed. Stop if the kit requires attachment to an airbag cover or alteration of SRS components.
FAQ
What are the Highland stalk versions?
Without Stalk for 2024–2025.09 and With Stalk for 2025.10+.
Does every kit include all three zones?
No. Select a single zone, one of the listed two-zone combinations, or the full three-zone set. The package follows the selected option.
Can I use sync mode without factory ambient lighting?
No. Sync requires an existing factory ambient-light system.
English 
German 
Spanish 