Glossy Front-Panel PPF for Your Model Y
This pre-cut clear glossy TPU film covers the hood, front bumper, left and right front fenders and both side mirror caps of the selected Model Y version. Choose the body-specific pattern, with 8, 11 or 12 film pieces as listed. An installation tool kit is included; wet installation.
- Glossy TPU
- Full Front Kit
- Body-Specific
- Tools Included
Hauptmerkmale
-
Full Front Coverage
The listed film covers the hood, front bumper, left and right front fenders and both mirror caps; this is not the full-car body kit.
-
Body-Specific Patterns
Separate older Model Y, Juniper, Juniper Performance, Standard and YL patterns, each cut for its own bumper and panels.
-
Version-Based Piece Count
The source lists 12 pieces for Model Y and Juniper Performance, 11 for Juniper and YL, and 8 for Standard.
-
Glossy TPU Finish
The clear glossy film keeps the paint color visible and adds a layer over suitable painted front surfaces; it cannot prevent every paint mark.
-
Installation Tools
An installation tool kit is included and shown with bottles, a cloth and a squeegee; preparation materials and suitable slip solution are still needed.
-
Wet Fitting and Edge Work
Pre-cut patterns reduce the need for on-car trimming; preparation, careful alignment and edge finishing remain essential.
Highlights
Included Installation Tools
The included tool kit is shown with bottles, a cloth and a squeegee. Preparation materials and slip solution are not included.
Hood, Bumper, Fenders and Mirror Caps
The full-front package lists the hood, front bumper, left and right front fenders and both mirror caps. Pattern shapes and piece counts differ by body version.
Clear Glossy TPU
The source specifies a nominal thickness of 8.5 mil, approximately 0.22 mm. The film adds a layer over suitable painted surfaces, without a numerical UV, yellowing or deep-damage repair guarantee.
Kompatibilität
| Modell | Years / Version | Hinweise |
|---|---|---|
| Model Y | 2020–2024 | 12 pre-cut pieces |
| Model Y Juniper | 2025+ | 11 pre-cut pieces |
| Model Y Juniper Performance | 2025+ | 12 pre-cut pieces |
| Model Y Standard | 2025+ | 8 pre-cut pieces |
| Model YL | 2026+ | 11 pre-cut pieces |
The Standard option here is listed as 2025+ and is cut for the Standard front shape; it is not interchangeable with a regular Juniper. Headlight and A-pillar film is not listed.
Technische Daten
| Produkttyp | Pre-cut full front TPU paint protection film kit |
|---|---|
| Compatible Models | Model Y 2020-2024, Juniper 2025+, Juniper Performance 2025+, Standard 2025+, Model YL 2026+ |
| Position / Location | Hood, front bumper, left and right front fenders, side mirror caps |
| Material | TPU |
| Surface Finish | Clear, high-gloss |
| Menge | Pre-cut pieces by version: Model Y 12, Juniper Performance 12, Juniper 11, Model YL 11, Standard 8 |
| Dicke | Nominal 8.5 mil (approximately 0.22 mm) |
| Installation Type | Wet application |
What's in the Box
- Full hood coverage
- Front bumper coverage
- Left front fender coverage
- Right front fender coverage
- Side mirror cap coverage
- Installation tool kit
Installation
- Clean and prepare suitable painted panels using the supplied film guidance.
- Apply suitable slip solution to the panel and adhesive side, then align the correct pattern.
- Tack reference points and squeegee solution and air outward without overstretching; finish edges carefully.
- Keep dry for at least 8–12 hours.
Gut zu wissen
Achtung
- Each body version has its own pattern; patterns are not interchangeable.
- Apply only to the intended painted panels and keep cameras, sensors, lights and their clearances unobstructed. Headlight and A-pillar film is not listed in this kit.
- Film cannot prevent dents, severe impacts or every paint mark.
Pflege
- Keep dry for at least 8–12 hours after fitting.
FAQ
Does this kit cover the whole car?
It is the full-front kit: hood, front bumper, left and right front fenders and both mirror caps. Side doors and rear body groups are not listed in this package.
Are headlights and A-pillars included?
No. Headlight and A-pillar film is not listed in this kit.
How do I choose the correct pattern?
Model Y, Juniper, Juniper Performance, Standard and YL each have their own pattern; piece counts and shapes differ.
Can I fit it myself?
Wet installation requires panel preparation, alignment and squeegee technique, especially for complex bumper curves and edge finishing.
English 
German 
Spanish 