Geometric Door Projection in Two- or Four-Light Packs
Replace the door downlights with LED projector units that cast the white geometric line pattern shown in the product images. Choose two lights for the front doors or four for front and rear doors.
- Geometric Pattern
- 2 or 4 Lights
- Door-Linked Operation
- ABS Housing
Key Features
-
Door-downlight replacement
The rectangular projector unit replaces the existing door lamp.
-
Geometric projection
The product images show a white fan-like line pattern, rather than TESLA lettering.
-
Two pack sizes
Choose 2 lights for the front doors or 4 for front and rear doors.
-
Door-linked operation
The lamps illuminate with the open door and switch off with normal closure.
-
ABS housing
The projector components are housed in a black ABS body.
-
Original connector
Replaces the original door light in its housing, using the original connector and retention tabs.
Highlights
Two-Light Pack
The Front Door 2PCS option contains two projector lights. Select by the full pack label rather than interpreting the SKU suffix as the fitting position.
Four-Light Pack
The Front & Rear Door 4PCS option contains four lights.
White Line Projection
The installed image shows a white fan-like geometric pattern on the ground.
Compatibility
| Model | Years / Version | Notes |
|---|---|---|
| Tesla Model 3 | 2017+ | Choose 2/4-light pack. |
| Tesla Model Y | 2020+ | Door lamp replacement. |
| Tesla Model YL | 2026+ | Door lamp replacement. |
Fits Model 3 2017+, Model Y 2020+ and Model YL 2026+. The generic 2017+ option label does not mean Model Y or YL existed in 2017.
Specifications
| Product Type | LED door projector lights |
|---|---|
| Compatible Models | Model 3 (2017+), Model Y (2020+), Model YL (2026+) |
| Position / Location | Door underside, replacing the existing lamp |
| Material | ABS |
| Quantity | 2 pieces (front doors) or 4 pieces (front and rear doors) |
| Light Source | LED projector; white geometric line pattern shown |
| Control Method | Turns on when the door opens and off when it closes |
| Installation Type | Replacement door-light unit |
| Shipping Weight | 167 g (0.37 lb) |
What's in the Box
- 2×LED projector lights, when Front Door 2PCS is selected
- 4×LED projector lights, when Front & Rear Door 4PCS is selected
Installation
- Park and keep the door open throughout fitting.
- For Model 3, fully lower the corresponding window first. Follow its lamp-replacement instructions and release the connector without pulling the attached harness.
- Fit the correct lamp orientation and reconnect without forcing the plug or retention tabs.
Good to Know
Caution
- Keep the door open during installation. For the Model 3 procedure, fully lower the corresponding window first and do not pull an attached wiring harness.
- This is an aftermarket accessory, not proof of original Tesla manufacture. A fuse does not eliminate every electrical fault.
Care
- Keep the lens clean using a soft cloth and avoid soaking the lamp.
FAQ
Is the projected pattern a TESLA-letter logo?
The product images show a white geometric fan-like line pattern. TESLA lettering is not shown in these images.
Which pack covers the front and rear doors?
Select Front & Rear Door 4PCS for four lights. Front Door 2PCS contains two lights for the front pair.
Does a built-in fuse guarantee that a fault cannot occur?
No. Electrical protection does not eliminate every fault.
English 
German 
Spanish 