Adhesive Mirror Housing Edge Strips
Add a slim accent along the exterior mirror housing with these curved ABS strips. Peel-and-stick backing attaches them to a matching, clean and dry surface. Select the Model 3, Highland, Model Y or Juniper option and the finish offered for that vehicle.
- ABS
- Adhesive Backing
- Housing Edge Accent
Key Features
-
Housing Edge Accent
Curved strips follow the exterior mirror housing edge without replacing the mirror cap or glass.
-
ABS Construction
Molded ABS adds a surface layer along the covered housing area; it is not a collision safety device.
-
Adhesive Backing
Peel-off liners expose the adhesive for attachment to a clean, dry mirror housing.
-
Model Selection
Separate Model 3, Highland, Model Y and Juniper options identify the vehicle group to select.
-
Finish Choices
Black and carbon-pattern styles are offered for Model 3; Model Y options also offer white.
Highlights
Along the Housing Edge
The installed carbon-pattern example shows the strip along the lower outer housing edge.
Peel-Off Adhesive Liners
The backing uses peel-off liners for adhesive attachment. Clean and dry the matching surface, align the strip and press evenly without covering moving parts.
Choose the Finish
Black and carbon-pattern styles are offered for both Model 3 groups. Model Y and Juniper options also offer white. Color names describe the strip finish and do not guarantee an exact factory paint match.
Compatibility
| Model | Years / Version | Notes |
|---|---|---|
| Model 3 | 2017–October 2023 | Original Car Black or Carbon Fiber Pattern. |
| Model 3 Highland | 2024+ | Original Car Black or Carbon Fiber Pattern. |
| Model Y | 2020–2024 | Original Car White, Original Car Black or Carbon Fiber Pattern. |
| Model Y Juniper | 2025+ | Original Car White, Original Car Black or Carbon Fiber Pattern. |
Each vehicle group has its own finishes. Does not fit replacement or modified mirrors.
Specifications
| Product Type | Adhesive exterior mirror housing edge strips |
|---|---|
| Compatible Models | Model 3 2017–October 2023; Model 3 Highland 2024+; Model Y 2020–2024; Model Y Juniper 2025+ |
| Position / Location | Exterior side mirror housing edge |
| Material | ABS |
| Surface Finish | Carbon Fiber Pattern is a decorative appearance, not solid carbon fiber |
| Color | Original Car Black, Original Car White or Carbon Fiber Pattern, depending on vehicle option |
| Installation Type | Peel-and-stick adhesive backing |
| Selection | Match both vehicle group and actual mirror housing contour |
What's in the Box
- Mirror housing edge strips in the selected vehicle version and finish, with adhesive backing
Installation
- Dry-fit each strip against the housing edge with its adhesive liner still in place.
- Clean the attachment surface with a product suitable for its finish, remove dirt and wax, and let it dry fully.
- Remove the adhesive liner, align the strip and press evenly along the contact area. Do not bridge joints or cover the mirror glass or any equipped light or sensor.
- Follow the adhesive instructions for bonding time before washing.
Good to Know
Caution
- These strips do not prevent collision damage.
Care
- Use a soft cloth and a cleaner compatible with the strip and mirror finishes; avoid abrasive pads.
- Removal can leave residue or mark the mirror finish.
FAQ
Which finish is available for my vehicle?
Model 3 and Highland options offer Original Car Black or Carbon Fiber Pattern. Model Y and Juniper options also offer Original Car White. Select the vehicle group first.
Is the carbon-pattern version made from real carbon fiber?
The strips are ABS. Carbon Fiber Pattern describes the decorative appearance.
Will the strips affect folding?
No. The strips sit along the lower outer housing edge, clear of the folding joint.
Do they prevent mirror damage in a collision?
They add a surface layer along the covered housing edge. They do not prevent collision damage or protect the whole mirror.
English 
German 
Spanish 