A Ground Projection Behind Your Tesla
Add a decorative pattern on the ground behind the vehicle with a projection module fitted at an original rear license-plate light opening. Choose Time Tunnel, Commemorative Badge or Moon Landing Badge. The package contains one module, an installation tool and a manual.
- Rear Ground Projection
- 3 Patterns
- 1 Module
Key Features
-
Rear ground projection
Adds decorative artwork behind the vehicle from a rear license-plate light position.
-
Three pattern options
Time Tunnel, Commemorative Badge and Moon Landing Badge.
-
Two-pin connection
The module connects through a matching two-pin plug at the original light opening.
-
Integrated projector
A lens, clear housing and aluminum heat sink form the replacement module.
-
Single-module package
Includes one projection light, an installation tool and an instruction manual.
-
Vehicle selection
Fits Model 3 2017+ and Model Y 2020–2025.03.
Highlights
Time Tunnel Pattern
A red-and-white geometric design projects behind the rear license-plate area. The illustration shows the intended placement; actual appearance depends on the ground surface and surrounding light.
Moon Landing Pattern
The Moon Landing Badge option uses an astronaut and lunar scene. Select the desired pattern together with the vehicle option.
Commemorative Badge Pattern
The Commemorative Badge option is pictured as a white radial-line design. All three patterns use the same type of rear-mounted projection module.
Compatibility
| Model | Years / Version | Notes |
|---|---|---|
| Model 3 | 2017+ | Rear license plate light position |
| Model Y | 2020–2025.03 | Rear license plate light position |
Fits Model 3 2017+ and Model Y 2020–2025.03. Does not fit Model Y after 2025.03.
Specifications
| Product Type | Rear license plate projection light module |
|---|---|
| Compatible Models | Model 3 (2017+), Model Y (2020–2025.03) |
| Position / Location | Original rear license plate light position |
| Material | Aluminum heat sink; clear housing and integrated projection lens |
| Quantity | 1 projection light |
| Connector Type | Two-pin connector |
| Light Source | Projection module projecting onto the pavement behind the car |
| Lighting Modes | Time Tunnel, Commemorative Badge (described as radial lines) or Moon Landing Badge pattern |
| Installation Type | Direct replacement; no drilling or wire modification |
| Package Contents | 1 projection light, installation tool and instruction manual |
What's in the Box
- 1×License plate projection light
- 1×Installation tool
- 1×Instruction manual
Installation
- Release the original light, connect the module at the two-pin connector and secure it in the original opening without pinching the lead.
- Test the projection and required plate illumination, other rear-light functions and secure mounting.
Good to Know
Caution
- No wire cutting required.
Care
- Keep the lens and plate area clean.
FAQ
Where does this module fit?
It replaces a light at the rear license-plate area and projects onto the ground behind the vehicle. It is separate from the lights underneath the doors.
Which patterns are available?
Select Time Tunnel, Commemorative Badge or Moon Landing Badge. The Commemorative Badge pattern is shown as white radial lines.
How many modules are included?
The package contains one projection module, one installation tool and one instruction manual.
Is it road-use certified?
No. An illuminated pattern alone does not establish road-use compliance.
English 
German 
Spanish 