A Pull Loop for Your Juniper Cargo Floor
These two ABS and nylon pull handles give you a grip at the cargo floor panel edge of the 2025+ Model Y Juniper. The backing attaches to the intended carpeted panel so you can lift it to reach under-floor storage. Fold the flexible straps inward when finished, keeping the rear latch clear.
- Set of 2
- ABS + Nylon
- Floor Panel Access
- Hook-and-Loop
Key Features
-
Floor Panel Access
Pull the nylon loop to raise the removable cargo floor panel and reach storage underneath, rather than gripping the carpet edge.
-
Two Shaped Handles
The set contains two pull handles with different shaped bases; match each to the intended panel edge and supplied fitting guidance.
-
ABS and Nylon
Each handle combines an ABS body with a flexible nylon pull strap, offering a defined grip for normal floor-panel lifting.
-
Hook-and-Loop Backing
Press the integrated backing onto the carpeted panel surface.
-
Low-Profile Form
The compact base stays at the panel edge while the flexible loop can fold down under the cargo mat.
-
Latch Clearance
Fold the strap inward over the floor panel rather than forward into the rear latch area.
Highlights
Two Shaped Pull Handles
The standalone pair shows two differently shaped ABS bases, each with a nylon pull loop. The package contains two handles.
Lift the Cargo Floor Panel
The installed example shows a hand pulling the flexible loop to raise the cargo floor panel. This is an under-floor storage accessory, separate from the tailgate’s opening and closing controls.
Fold the Strap Clear of the Latch
The illustrated fitting tip directs the strap inward over the panel, or beneath the cargo mat, rather than forward toward the rear latch.
Compatibility
| Model | Years / Version | Notes |
|---|---|---|
| Model Y Juniper | 2025+ | Carpeted cargo floor panel. |
For the floor-panel position shown. The handles are not load-securing anchors.
Specifications
| Product Type | Trunk floor panel pull handles |
|---|---|
| Compatible Models | Model Y Juniper 2025+ |
| Position / Location | Cargo floor panel edge |
| Material | ABS body and nylon pull strap |
| Quantity | 2 handles |
| Installation Type | Hook-and-loop backing on intended carpeted panel |
| Shipping Weight | 38 g; not product net weight |
What's in the Box
- 2×trunk floor panel pull handles
Installation
- Unload and lift the relevant floor panel to identify the intended mounting edge.
- Press the hook-and-loop backing onto the clean carpeted panel edge.
- Lift the unloaded panel gently using the nylon loop.
- Lower the panel and fold the strap inward over it, following the illustrated orientation or under the cargo mat.
Good to Know
Caution
- For normal floor-panel lifting only; not a cargo tie-down, luggage carrying handle or tailgate-closing handle.
- Fold straps inward over the floor panel and keep them away from the rear latch.
- Unload the panel before lifting and re-engage the backing if loose; do not pull a damaged or detached strap.
Care
- Remove loose debris from the backing and carpet contact area before re-engaging.
FAQ
Is this a handle for closing the tailgate?
It is for lifting the cargo floor panel to access storage underneath, not for pulling the tailgate closed.
How many handles are included?
Two pull handles, shown with differently shaped bases and nylon loops.
Can I use the loop as a cargo anchor?
No. It is intended for normal floor-panel lifting, not tying down luggage or carrying loads.
Where should the strap sit when not in use?
Fold it inward over the floor panel, or under the cargo mat as shown in the fitting tip, away from the rear latch.
English 
German 
Spanish 