Bolt-On Forged Wheel Spacers for Model 3, Y, S and X
These forged wheel spacers use a bolt-on layout with a black coated body, five wheel studs and alternating hub mounting holes. Options cover Model 3, Model Y, Model S and Model X, each in several thicknesses and as a two-piece or four-piece set.
- Forged Construction
- Bolt-On Layout
- 2 or 4 Spacers
- Model-Specific Thickness
Key Features
-
Bolt-On Spacer Layout
The illustrated spacer has five wheel studs, five alternating mounting holes and a center lip; match all interfaces to the actual hub and wheel.
-
Thickness by Model
Model 3 and Model Y choices list 15, 20, 25, 30 and 35 mm; Model S and Model X choices list 15, 20, 25 and 30 mm.
-
Two Set Sizes
Select a two-piece or four-piece set in the actual model and thickness combination.
-
Forged Construction
The spacers use forged construction with a black coated body and silver hardware.
-
Hub-Facing Surface
The rear mounting face seats flush on the matching clean hub.
Highlights
Bolt-On Layout
The illustrated front face has five wheel studs, five alternating mounting holes and a center lip.
Flush Hub-Facing Contact
The rear face must sit flush against a compatible clean hub.
Choose Model, Thickness and Quantity
Model 3 and Y options list 15–35 mm in five steps; Model S and X list 15–30 mm in four steps.
Compatibility
| Model | Years / Version | Notes |
|---|---|---|
| Model 3 | 15, 20, 25, 30 or 35 mm; 2 or 4 pieces. | |
| Model Y | 15, 20, 25, 30 or 35 mm; 2 or 4 pieces. | |
| Model S | 15, 20, 25 or 30 mm; 2 or 4 pieces. | |
| Model X | 15, 20, 25 or 30 mm; 2 or 4 pieces. |
Each option is built for its listed model: Model 3, Model Y, Model S or Model X.
Specifications
| Product Type | Bolt-on wheel spacer |
|---|---|
| Compatible Models | Model 3, Model Y, Model S or Model X selection |
| Position / Location | Between wheel hub and wheel |
| Surface Finish | Black coating |
| Color | Black body with silver hardware |
| Quantity | 2 or 4 spacers per selected set |
| Thickness | Model 3/Y: 15, 20, 25, 30 or 35 mm; Model S/X: 15, 20, 25 or 30 mm |
| Installation Type | Bolt-on, with product hardware instructions |
| Manufacturing Process | Forged construction |
What's in the Box
- 2 or 4 wheel spacers, according to the selected set
Installation
- Support the vehicle safely and clean the mating surfaces. Fit only where both spacer interfaces seat flush with the specified compatible hardware; never stack spacers or modify studs.
- Tighten the spacer-to-hub and wheel-to-spacer interfaces using their exact applicable instructions. Spacer fasteners have their own torque values.
Good to Know
Caution
- This is an aftermarket wheel accessory. Tesla warns that non-approved modifications can affect performance and safety, and damage they cause is excluded from vehicle warranty coverage. It is not Tesla-approved.
Care
- Have mounting contact, hardware retention and clearance inspected at the intervals required by the exact product instructions and after wheel service.
- Stop using a spacer with damage, cracks, loosened hardware or abnormal vibration; have the wheel assembly inspected before further driving.
FAQ
Are four spacers included in every order?
No. The choices include two-piece and four-piece sets.
Is 35 mm available for every model?
The actual Model 3 and Model Y options include 35 mm. Model S and Model X options list 15, 20, 25 and 30 mm.
Can the original wheel torque be used for all spacer fasteners?
No. The spacer-to-hub and wheel-to-spacer interfaces use separate torque values.
English 
German 
Spanish 