Ten-Piece Dry Carbon Door Switch Trim for Model Y L
This set adds dry carbon fiber overlays to the window switch panels and door release and lock buttons on all four doors of the left-hand-drive, six-seat Model Y L. It includes four panel trims and six button covers in a choice of matte or glossy finish. Pre-applied 3M tape and an adhesion promoter wipe are included.
- 10-Piece Set
- Dry Carbon Prepreg
- Matte or Glossy
- Pre-Applied 3M Tape
- Model Y L LHD
Key Features
-
Ten-Piece Door Set
Four window-panel trims and six door release and lock button covers
-
Dry Carbon Prepreg
Molded carbon fiber fabric with epoxy resin and a 2×2 twill weave
-
Matte or Glossy Finish
Choose one of the two carbon fiber surface finishes
-
Model Y L Left-Hand Drive
For the six-seat Model Y L with left-hand drive
-
Pre-Applied 3M Tape
Adhesive is fitted to every cover, with an adhesion promoter wipe included
-
Overlay Profile
Adds approximately 1 mm over the factory panel
Highlights
Four Panels and Six Buttons
The ten-piece set includes one window-panel trim for each door and six door release and lock button covers.
Molded Twill Carbon
The covers use 2×2 twill carbon prepreg with epoxy resin, molded and cured under heat and pressure.
Switch Openings
The overlay adds approximately 1 mm, with openings for every switch and button.
Pre-Applied Adhesive
Each cover has 3M double-sided tape on the rear. An adhesion promoter wipe is included.
Compatibility
| Model | Years / Version | Notes |
|---|---|---|
| Tesla Model Y L (six-seat) | Left-hand drive only |
For the six-seat Model Y L with left-hand drive.
Specifications
| Product Type | Window lift button trim and door switch covers in dry carbon fiber |
|---|---|
| Compatible Models | Tesla Model Y L, six-seat, left-hand drive |
| Position / Location | Window lift switch panels and door release and lock buttons on all four doors |
| Material | 2×2 twill carbon prepreg with epoxy resin; compression molded |
| Surface Finish | Matte or Glossy carbon fiber |
| Pattern / Weave | 2×2 twill |
| Quantity | 10 pieces (4 window panel covers and 6 door release and lock button covers) |
| Thickness | About 1 mm added over the factory panel |
| Installation Type | Pre-applied die-cut 3M double-sided adhesive with an adhesion promoter wipe |
| Drilling Required | No drilling and no door panel removal |
| Hand Drive (LHD/RHD) | Left-hand drive only |
| Package Contents | 4 window lift panel covers, 6 door release and lock button covers, pre-applied 3M adhesive and 1 adhesion promoter wipe |
| Shipping Weight | 240 g (0.53 lb) |
What's in the Box
- 4×Window lift switch panel trim covers (one for each door)
- 6×Door release and lock button covers
- 3M double-sided adhesive pre-applied to the reverse side of every cover
- 1×Adhesion promoter wipe
Installation
- Prepare the attachment area using the supplied promoter and adhesive instructions, and let it dry.
- Peel the liner, align the openings and press evenly into place.
- Keep the doors dry for 24 hours, or 72 hours in cold weather.
Good to Know
Caution
- For six-seat Model Y L with left-hand drive. Not for five-seat Model Y, Model 3 or right-hand-drive vehicles.
- Keep the doors dry for the first 24 hours, or 72 hours in cold weather.
Care
- Clean with mild soap and water on a soft microfiber cloth, then dry promptly.
- Avoid alcohol, tar remover, solvent-based dressings, abrasive polish and stiff brushes.
- Replacement adhesive is needed before refitting.
FAQ
Does it fit a five-seat Model Y or Model 3?
No. This set is for the six-seat Model Y L.
Is there a right-hand-drive version?
No. The set is molded for left-hand drive only.
How many pieces are included?
Ten pieces: four window-panel trims and six door release and lock button covers, plus pre-applied 3M tape and an adhesion promoter wipe.
Can a removed cover be refitted?
Replacement adhesive is required before refitting.
English 
German 
Spanish 