TESVXtesvx.com
Fuente: https://tesvx.com/es/product/tpu-full-car-paint-protection-film-ppf-for-tesla-model-3/
0

Reseñas

Todavía no hay reseñasSé el primero en compartir tu experiencia con este producto.

Especificaciones

Tipo de productoPaint protection film kit
Compatible ModelsModel 3 / Model 3 Highland / Model 3 Highland Performance
Lugar de instalaciónFront bumper, front end, left side, right side, rear body
MaterialClear high-gloss TPU, 8.5 mil (about 0.22 mm)
CantidadHighland 21; Highland Performance 21; Model 3 35
Peso del envío16 kg (35.27 lb)
Self-HealingHeat-activated topcoat

Detalles

Clear Glossy PPF for Your Model 3 Body Style

This pre-cut TPU paint protection film kit covers selected painted panels across the Model 3 body. Choose the pattern for Model 3, Highland or Highland Performance, with 35 or 21 film pieces according to the version. The package includes an installation tool kit. Wet installation.

  • Clear Gloss TPU
  • Pre-Cut Patterns
  • Body-Panel Coverage
  • Tool Kit Included

Características principales

  1. Clear Gloss Finish

    The transparent glossy film keeps the paint color visible while adding a layer over the selected painted panels.

  2. Body-Specific Patterns

    Choose the Model 3, Highland or Highland Performance pattern; identical piece counts do not make different bumper shapes interchangeable.

  3. Version-Based Piece Count

    The Model 3 set lists 35 pre-cut film pieces, while Highland and Highland Performance each list 21 for their respective patterns.

  4. Five Coverage Groups

    The package lists front bumper, front end, left side, right side and rear body film groups.

  5. Installation Tool Kit

    The source lists an included tool kit and shows bottles, a cloth and a squeegee; suitable preparation and slip solution are still needed.

  6. Wet Application

    Preparation, pattern alignment, squeegee work and edge finishing require care, especially around complex bumper curves.

Aspectos destacados

Included Installation Tools - TESVX Paint Protection Film Kit
Included Installation Tools

The included tool kit is shown with bottles, a cloth and a squeegee. Panel preparation materials and slip solution are not included.

Coverage Across the Painted Body

The package lists front bumper, front end, left side, right side and rear body groups. Cameras, sensors and lights stay uncovered.

A Pattern for Each Body Style

The older Model 3 and the two Highland options use their own panel geometry. A 21-piece count shared by the Highland options does not make their bumper patterns interchangeable.

Compatibilidad

Modelo Years / Version Notas
Model 3 2017–2023 TPP001-Gold3; 35 pre-cut film pieces.
Model 3 Highland 2024+ TPP001-G3; 21 pre-cut film pieces.
Model 3 Highland Performance 2024+ TPP001-G3P; 21 pre-cut film pieces; match Performance body geometry.

Each version has its own panel pattern. Full-car body coverage does not include glass surfaces, light lenses or sensor areas.

Especificaciones

Tipo de producto Pre-cut full-car paint protection film kit
Compatible Models Model 3 2017–2023; Highland and Highland Performance 2024+ by selected pattern
Position / Location Selected painted body panels: front bumper, front end, left side, right side and rear body
Material TPU
Surface Finish Clear, high-gloss
Cantidad 35 pre-cut pieces for Model 3; 21 for each Highland option
Grosor Nominal 8.5 mil (approximately 0.22 mm)
Installation Type Wet application
Care Instructions Keep dry for at least 8–12 hours after fitting

What's in the Box

  • Front bumper film kit
  • Front end film kit
  • Left side film kit
  • Right side film kit
  • Rear body film kit
  • Installation tool kit

Instalación

Difficulty
Advanced
Tiempo
Keep dry for at least 8–12 hours after installation
Herramientas
Included tool kit; suitable surface preparation and slip solution required
  1. Clean and prepare suitable painted panels using the supplied film guidance.
  2. Apply suitable slip solution to the panel and adhesive side, then align the correct pre-cut pattern.
  3. Tack reference points and squeegee solution and air outward without overstretching the film; finish edges carefully.
  4. Keep the vehicle dry for at least 8–12 hours.

Conviene saber

Precaución
  • Model 3, Highland and Highland Performance patterns are not interchangeable.
  • Apply each pattern to its painted panel. Glass and lens film is not included.
  • Film cannot prevent dents, severe impacts or every paint mark.
Cuidado
  • Keep dry for at least 8–12 hours after fitting.

Preguntas frecuentes

Which Model 3 pattern should I choose?

Model 3 2017–2023, Highland 2024+, or Highland Performance 2024+; each has its own pattern.

What coverage is listed?

Front bumper, front end, left side, right side and rear body film groups, plus an installation tool kit. Glass, lights and sensor areas are not included.

Can I install it myself?

Wet application requires preparation, alignment and squeegee technique, particularly for complex bumper curves and edge finishing.

Will the film prevent dents or repair deep damage?

No. It adds a layer over suitable painted panels, but does not prevent dents, severe impacts or every paint mark. No deep-damage repair or numerical UV protection guarantee is made.

Recomendados

Seleccionar especificaciones

Entrega

Se envía en 1-3 días laborables

Free shipping on eligible orders of US$149 or more

Métodos de pago

  • PayPalPayPal
  • Tarjetas de débito y créditoVisaMastercardAmerican Express
  • Apple PayApple Pay
  • Google PayGoogle Pay
  • BancontactBancontact
  • BlikBlik
  • EPSEPS
  • iDealiDeal
  • MyBankMyBank
  • Przelewy24Przelewy24
  • TrustlyTrustly
  • MultibancoMultibanco

Los métodos disponibles pueden variar según la moneda y el país de facturación; la lista definitiva se muestra al finalizar la compra.

Servicio

  • Pago seguro

    Los pagos se procesan a través de una conexión cifrada.

  • Asistencia posventa

    Contacta con nosotros si tienes dudas sobre la instalación o el uso.

Especificaciones

Tipo de producto
Paint protection film kit
Compatible Models
Model 3 / Model 3 Highland / Model 3 Highland Performance
Lugar de instalación
Front bumper, front end, left side, right side, rear body
Material
Clear high-gloss TPU, 8.5 mil (about 0.22 mm)
Cantidad
Highland 21; Highland Performance 21; Model 3 35
Peso del envío
16 kg (35.27 lb)
Self-Healing
Heat-activated topcoat

Escribe una reseña

8.5 mil Glossy TPU Full Car Paint Protection Film with Self-Healing Topcoat for Tesla Model 3
Valoración general *
¿Qué destacarías?opcional, hasta 3
Añadir fotos0 / 5
JPG, PNG o WebP, hasta 5 MB cada uno.

Las reseñas se revisan antes de publicarse. La etiqueta Compra verificada se añade automáticamente cuando tu correo electrónico coincide con el de un pedido.

TESVX product image
8.5 mil Glossy TPU Full Car Paint Protection Film with Self-Healing Topcoat for Tesla Model 3

El precio original era: US$599.00.El precio actual es: US$559.00.

Añadir al carrito Este producto tiene múltiples variantes. Las opciones se pueden elegir en la página de producto