Dry Carbon Trim for the Turn Signal Stalk
Add a dry carbon surface to the exterior of the matching turn signal stalk with this clip-on cover. It is offered for Model Y Juniper 2025.03+, Model 3 Highland 2026+ and Model YL 2026+ in matte, glossy or glossy red carbon fiber. The shell attaches without adhesive.
- Dry Carbon Fiber
- Clip-On
- No Adhesive
- 3 Finishes
Características principales
-
Dry Carbon Construction
A dry carbon fiber shell with a clear-coated surface
-
Three Finish Choices
Matte carbon fiber, glossy carbon fiber or glossy red carbon fiber
-
Exterior Stalk Cover
The shell covers the outside of the matching turn signal stalk
-
Clip-On Attachment
Snap-on fitting uses no adhesive
-
Refresh Stalk Shape
Matches the specified Juniper, Highland 2026+ and Model YL stalk geometry
Aspectos destacados
Dry Carbon Surface
The shaped dry carbon shell has a clear-coated surface and visible weave. It fits over the exterior of the original stalk.
Glossy Red Option
Glossy red carbon fiber is one of the three purchase choices. Select the finish you want; the finish options are separate choices.
The Fitted Control
The installed cover follows the stalk shape.
Matte or Glossy Carbon
Matte carbon fiber and glossy carbon fiber are also available. Available in matte or glossy carbon.
Compatibilidad
| Modelo | Years / Version | Notas |
|---|---|---|
| Model Y Juniper | 2025.03+ | Standard / Performance; matching refreshed turn signal stalk |
| Model 3 Highland | 2026+ | Requires the matching turn signal stalk |
| Model YL | 2026+ | Matching refreshed turn signal stalk |
Not for older Model 3 or Model Y stalk geometries. Vehicles without a matching stalk cannot use the cover.
Especificaciones
| Tipo de producto | Dry carbon fiber turn signal stalk cover |
|---|---|
| Compatible Models | Model Y Juniper 2025.03+ (Standard / Performance); Model 3 Highland 2026+; Model YL 2026+; matching stalk required |
| Position / Location | Exterior of the turn signal stalk |
| Material | Autoclave-cured dry carbon fiber with clear coat |
| Surface Finish | Matte carbon fiber / Glossy carbon fiber / Glossy red carbon fiber |
| Installation Type | Tool-free clip-on / snap-on; no adhesive |
| Contenido del paquete | Turn signal stalk cover(s), selected finish |
What's in the Box
- Turn signal stalk cover(s), selected finish
Instalación
- Wipe the original stalk surface clean and dry.
- Align the internal clip channels with the stalk without covering or restricting any moving part or button.
- Seat the clip-on shell by hand without forcing it. Stop if the clips do not align.
Conviene saber
Precaución
- A Highland year label alone does not prove a matching stalk is fitted; this cover does not add a stalk to a vehicle without one.
- Fit while parked without forcing or over-flexing the shell. Leave all moving parts, stalk travel, return and any original buttons unobstructed.
- Remove the cover and resolve any binding, looseness or changed operation.
Cuidado
- Wipe with a soft cloth; avoid abrasive cleaners or excessive force on the thin shell.
Preguntas frecuentes
Which stalk does it cover?
The matching refreshed turn signal stalk on the specified vehicles. It does not add a stalk or change the vehicle controls.
Will it fit any Highland?
The purchase option specifies 2026+. No. It fits Highland 2026+ with the physical turn signal stalk only; vehicles with steering-wheel turn signal buttons are excluded.
Does it need adhesive?
The cover uses a tool-free clip-on design without adhesive.
Can it be removed?
Release the clip-on shell gently by hand.
English 
German 
Spanish 