Real Dry Carbon Fiber for the Back of the Cybertruck Screen
Add a dry molded carbon-fiber finish to the rear housing of your Cybertruck center display. The two-piece set follows the back of the display with separate top and bottom overlays and pre-applied automotive-grade double-sided tape. Choose a glossy reflective finish or a lower-reflection matte finish, and dry-fit the parts before bonding.
- Dry Molded Carbon
- 3D-Scanned Shape
- Adhesive Fit
- 2-Piece Set
- Glossy or Matte
Características principales
-
Dry Molded Carbon Fiber
Made from autoclave dry molded carbon fiber for strength and lightweight durability
-
3D-Scanned Fit
Precision-molded from a 3D scan of the Cybertruck center display rear
-
Quick Tape Install
Pre-applied automotive-grade double-sided tape secures it in about 5 minutes without removing the screen
-
Two-Piece Set
A top piece and a bottom piece cover the back of the display
-
Glossy or Matte
Glossy has a high-shine finish, while matte has a lower-reflection satin appearance.
-
Prep Kit
The installation uses a prep kit for cleaning and preparing the surface
-
Permanent Fit
The adhesive is designed for a secure, long-lasting hold and can be removed cautiously with heat
Aspectos destacados
Autoclave Dry Carbon
Made from autoclave dry molded carbon fiber for strength and lightweight durability.
Scan-Based Fit
It is precision-molded from a 3D scan of the center display rear for integration with the original shape.
No Screen Removal
Pre-applied double-sided tape means a clean installation that does not require screen removal or complex disassembly.
Two Finishes
Glossy has a reflective surface with clear-coat protection. Matte has a lower-reflection satin appearance.
Compatibilidad
| Modelo | Years / Version | Notas |
|---|---|---|
| Tesla Cybertruck | Rear of the center display |
For the Cybertruck center-display rear housing. The adhesive is intended for a lasting bond; removal needs care to protect the underlying plastic.
Especificaciones
| Tipo de producto | Center display back overlay (2-piece set) |
|---|---|
| Compatible Models | Tesla Cybertruck |
| Position / Location | Rear of the center display |
| Material | Autoclave dry molded carbon fiber |
| Surface Finish | Glossy (wet look) or Matte (dry look) |
| Cantidad | 2 pieces: top and bottom |
| Installation Type | Pre-applied automotive-grade double-sided tape; no specialized tools |
| Installation Time | About 5 minutes, then 24 hours to cure |
| Contenido del paquete | 2 carbon fiber overlay pieces, top and bottom, with a prep kit |
| Peso del envío | 640 g (1.41 lb) |
What's in the Box
- 1×Top carbon fiber overlay piece
- 1×Bottom carbon fiber overlay piece
- 1×Prep kit
Instalación
- Use a cleaning cloth to thoroughly clean the back of the display and let it dry completely.
- Peel off the backing film from the pre-applied adhesive tape on the carbon fiber part.
- Carefully align and attach the top carbon fiber part to the back of the display.
- Press firmly for 30 seconds, then repeat the alignment and pressing for the bottom part.
- Avoid high temperatures or washing with water for 24 hours so the adhesive can fully cure.
Conviene saber
Precaución
- Intended as a permanent upgrade; remove cautiously with heat to avoid damaging the underlying plastic.
- Avoid high temperatures or washing with water within 24 hours after installation.
Preguntas frecuentes
Is the installation easy, and are tools required?
The installation is designed to be simple and needs no specialized tools. You clean, align and press the pieces on with the pre-applied automotive-grade double-sided tape.
What is the difference between glossy and matte?
Glossy has a reflective finish with a clear coat. Matte has a lower-reflection satin appearance.
Can I remove it later?
It is intended as a permanent upgrade, but it can be removed with careful application of heat, such as a hairdryer, while taking care to avoid damage to the underlying plastic.
How many pieces does the set include?
Two pieces: a top part and a bottom part.
English 
German 
Spanish 