TESVXtesvx.com
Fuente: https://tesvx.com/es/product/control-arm-kit-6-piece-set-for-tesla-model-x/
0

Reseñas

Todavía no hay reseñasSé el primero en compartir tu experiencia con este producto.

Especificaciones

Tipo de productoFront control arm kit, 6 complete arm assemblies with 2 camber bolts
Vehicle CompatibilityModel X 2016-early 2021 (pre-refresh) when stamps match
Lugar de instalaciónFront suspension: aluminum upper arms, forward lower arms and rearward lower arms
MaterialAluminum upper arms (aluminum and composite)
Cantidad6 arms: 2 upper, 2 forward lower, 2 rearward lower, plus 2 camber bolts
OEM Part Number1027322-00-E, 1027327-00-E, 1027351-00-C (x2), 1041570-00-B, 1041575-00-B
Método de instalaciónWorkshop installation on a lift with Jack Mode, then a 4-wheel alignment
Contenido del paquete6 complete front arm assemblies with ball joints and bushings pressed in, and 2 camber bolts
Peso del envío12.5 kg (27.56 lb)

Detalles

Six Complete Front Control Arms for the Pre-Refresh Model X

This kit contains six complete front arm assemblies for the Tesla Model X 2016-early 2021: both aluminum upper arms, both forward lower arms and both rearward lower arms, each with ball joints and bushings already pressed in, plus two camber bolts. The arms are aftermarket assemblies built to the Tesla OE numbers listed in the fit table. It does not fit the Model S, Model 3 or Model Y.

  • Six front arms
  • Two camber bolts
  • OE matching
  • Pre-refresh Model X
  • Aftermarket kit

Características principales

  1. Six Complete Arms

    Two aluminum upper arms, two forward lower arms and two rearward lower arms in one front kit

  2. Two Camber Bolts

    The kit includes two camber bolts for the aft arm, while the shop still sets camber on the alignment rack

  3. Pressed Joints and Bushings

    Each assembly arrives with ball joints and bushings already pressed in

  4. OE-Number Matching

    Built to OE numbers 1027322-00-E, 1027327-00-E, 1027351-00-C, 1041570-00-B and 1041575-00-B

  5. Stamp Letter Rules

    Upper arms stamped D are the same family; F or G upper letters are not listed for this kit

  6. Front suspension only

    Rear arms, sway-bar links and tie rods are not included.

Aspectos destacados

Six complete front arms - TESVX Front Control Arm Kit
Six complete front arms

Two aluminum upper arms, two forward lower arms and two rearward lower arms come with the kit, with joints and bushings already installed.

Match the OE references - TESVX Front Control Arm Kit
OE references

The kit references cover the stamped part numbers and revision letters. The diagram shows the six-arm arrangement.

Camber bolts included

Two camber bolts are included as shown. They do not replace a wheel alignment after installation.

Newer revisions

2021+ refresh or Plaid, F/G upper revisions and different arm-number families are not listed for this kit.

Compatibilidad

Modelo Years / Version Notas
Model X (pre-refresh, AWD) 2016-early 2021 Arms stamped with the listed OE numbers

Does not fit the Model S (steel uppers), Model 3 or Model Y.

Especificaciones

Tipo de producto Front control arm kit, 6 complete arm assemblies with 2 camber bolts
Compatible Models Model X 2016-early 2021 (pre-refresh) when stamps match
Position / Location Front suspension: aluminum upper arms, forward lower arms and rearward lower arms
Material Aluminum upper arms (aluminum and composite)
Cantidad 6 arms: 2 upper, 2 forward lower, 2 rearward lower, plus 2 camber bolts
Installation Type Workshop installation on a lift with Jack Mode, then a 4-wheel alignment
Contenido del paquete 6 complete front arm assemblies with ball joints and bushings pressed in, and 2 camber bolts
Peso del envío 12.5 kg (27.6 lb)
OE References 1027322-00-E, 1027327-00-E, 1027351-00-C (x2), 1041570-00-B, 1041575-00-B

What's in the Box

  • 2×Front upper arm (left and right), aluminum
  • 2×Front lower rearward (aft) arm (same part left or right)
  • 2×Front lower forward (fore) arm (left and right)
  • 2×Camber bolts as shown in the photos

Instalación

Difficulty
Advanced (workshop)
Herramientas
Workshop equipment specified by the vehicle-specific service procedure
  1. Lift the vehicle, replace the arms with the required fasteners and tighten them.
  2. Complete a four-wheel alignment.

Conviene saber

Precaución
  • Fit the kit using the current vehicle-specific service procedure.
  • A four-wheel alignment is required after installation.

Preguntas frecuentes

Is this only the upper arms?

No. It contains six front arms, two aluminum uppers, two rearward lowers and two forward lowers, plus two camber bolts. It does not include rear arms, sway-bar links or tie rods.

Does it fit the 2021+ refresh or Plaid Model X?

Do not order by year alone. Send a photo of the stamp and your VIN first, and do not order if the upper already says 1420321 or 1420326.

Does it fit the Model S?

No. The Model S uses different steel uppers, so use the Model S kit.

Are these genuine Tesla-boxed parts?

No. They are aftermarket assemblies made to the listed Tesla OE numbers, not Tesla Service Center sealed originals.

Is an alignment still needed?

Yes. The included camber bolts do not set the alignment. Have a suspension shop complete a four-wheel alignment after fitting the arms.

Recomendados

Seleccionar especificaciones

Entrega

Se envía en 1-3 días laborables

Free shipping on eligible orders of US$149 or more

Métodos de pago

  • PayPalPayPal
  • Tarjetas de débito y créditoVisaMastercardAmerican Express
  • Apple PayApple Pay
  • Google PayGoogle Pay
  • BancontactBancontact
  • BlikBlik
  • EPSEPS
  • iDealiDeal
  • MyBankMyBank
  • Przelewy24Przelewy24
  • TrustlyTrustly
  • MultibancoMultibanco

Los métodos disponibles pueden variar según la moneda y el país de facturación; la lista definitiva se muestra al finalizar la compra.

Servicio

  • Pago seguro

    Los pagos se procesan a través de una conexión cifrada.

  • Asistencia posventa

    Contacta con nosotros si tienes dudas sobre la instalación o el uso.

Especificaciones

Tipo de producto
Front control arm kit, 6 complete arm assemblies with 2 camber bolts
Vehicle Compatibility
Model X 2016-early 2021 (pre-refresh) when stamps match
Lugar de instalación
Front suspension: aluminum upper arms, forward lower arms and rearward lower arms
Material
Aluminum upper arms (aluminum and composite)
Cantidad
6 arms: 2 upper, 2 forward lower, 2 rearward lower, plus 2 camber bolts
OEM Part Number
1027322-00-E, 1027327-00-E, 1027351-00-C (x2), 1041570-00-B, 1041575-00-B
Método de instalación
Workshop installation on a lift with Jack Mode, then a 4-wheel alignment
Contenido del paquete
6 complete front arm assemblies with ball joints and bushings pressed in, and 2 camber bolts
Peso del envío
12.5 kg (27.56 lb)

Escribe una reseña

6-Piece Front Control Arm Kit with 2 Camber Bolts for Tesla Model X (2016–2021)
Valoración general *
¿Qué destacarías?opcional, hasta 3
Añadir fotos0 / 5
JPG, PNG o WebP, hasta 5 MB cada uno.

Las reseñas se revisan antes de publicarse. La etiqueta Compra verificada se añade automáticamente cuando tu correo electrónico coincide con el de un pedido.

TESVX product image
6-Piece Front Control Arm Kit with 2 Camber Bolts for Tesla Model X (2016–2021)

US$499.00

Añadir al carrito