Carbon-Pattern A-Pillar Covers Made for Cybertruck
This left and right pair of A-pillar triangle covers is designed for Tesla Cybertruck 2024 onward. The covers are molded ABS with a carbon fiber pattern, rather than real carbon fiber. Pre-applied adhesive attaches the covers over the factory trim; test-fit both sides before removing the backing.
- Cybertruck Fit
- Carbon Fiber Pattern
- 3M Adhesive
- Left & Right Pair
- No Tools
Características principales
-
Cybertruck Fit
Designed for the left and right A-pillar triangle areas on Cybertruck 2024 onward
-
Carbon Fiber Pattern
ABS with a carbon fiber pattern texture, not real carbon fiber, for a sporty look
-
Durable ABS Construction
High-quality ABS resists wear and holds up to daily use and the elements
-
Pre-Applied 3M Adhesive
Clean, peel the backing and press into place with no tools
-
Trim Protection
The covers shield factory A-pillar trim from scratches, chips and wear
-
Exterior Accent
Carbon-pattern styling for the exterior A-pillar trim
-
Left and Right Pair
Both A-pillars are covered for balanced, symmetrical styling
Aspectos destacados
Made for the A-Pillar Triangles
The left and right covers follow the A-pillar triangle trim areas on Cybertruck 2024 onward.
Carbon Fiber Pattern in Durable ABS
High-quality ABS provides durability and wear resistance, and the carbon fiber pattern texture adds a dynamic, racing-inspired look. The pattern is on ABS plastic rather than real carbon fiber.
Exterior Trim Accent
The covers add carbon-pattern styling over the factory A-pillar triangle trim. Inspect adhesion regularly and remove or replace any cover that becomes loose.
Simple Adhesive Install
Pre-applied 3M adhesive backing means you clean the surface, peel the backing and press into place. Both sides take 10-15 minutes, and the pair covers the left and right A-pillars.
Compatibilidad
| Modelo | Years / Version | Notas |
|---|---|---|
| Cybertruck | 2024+ | Left and right A-pillar triangle areas |
Custom-designed for Tesla Cybertruck (2024+).
Especificaciones
| Tipo de producto | A-pillar triangle covers (pair) |
|---|---|
| Compatible Models | Cybertruck (2024+) |
| Position / Location | Left and right A-pillar triangle areas |
| Material | High-quality ABS plastic |
| Pattern / Weave | Carbon fiber pattern texture (not real carbon fiber) |
| Cantidad | 2 pieces (left and right) |
| Installation Type | Pre-applied 3M adhesive backing; no tools |
| Installation Time | 10–15 minutes for both sides |
| Drilling Required | No |
| Contenido del paquete | 2 A-pillar triangle covers with pre-applied 3M adhesive and installation instructions |
| Care Instructions | Wipe with a damp microfiber cloth; avoid harsh chemicals; no high-pressure washing for 48 hours |
| Peso del envío | 500 g (1.1 lb) |
What's in the Box
- 2×A-Pillar Triangle Covers (left and right, pre-applied 3M adhesive)
- 1×Installation Instructions
Instalación
- Clean the A-pillar triangle area thoroughly with isopropyl alcohol and dry it completely; install above 60°F.
- Identify the left or right cover and test fit it before removing the adhesive backing.
- Peel the protective backing, align the cover with the A-pillar triangle and press firmly starting from the center.
- Work outward with even pressure and hold for 30 seconds, then repeat on the other A-pillar.
- Allow 24 hours for the adhesive to cure before a car wash.
Conviene saber
Precaución
- Install above 60°F for best adhesion.
- Avoid high-pressure car washes for the first 48 hours and wait 24 hours before any car wash.
- Follow the product instructions when removing the covers; removal may affect the underlying finish.
Cuidado
- Wipe clean with a damp microfiber cloth and use mild soap and water for stubborn dirt.
- Avoid harsh chemicals and abrasive cleaners.
- Avoid high-pressure car washes for the first 48 hours after installation.
Preguntas frecuentes
Is this real carbon fiber?
No. These are high-quality ABS plastic covers with a carbon fiber pattern texture.
Is installation difficult?
No. Clean the surface, peel the adhesive backing, align and press firmly. It takes 10-15 minutes for both sides with no tools.
Will the adhesive damage my paint?
Adhesive removal can affect the underlying finish.
How should I care for the covers?
Use a damp microfiber cloth and mild soap as needed. Avoid abrasive cleaners.
What is included?
The set includes 2 A-pillar triangle covers (left and right) with pre-applied 3M adhesive backing and installation instructions.
English 
German 
Spanish 