A Sharper Trunk Line in Dry Carbon Fiber
This dry carbon fiber spoiler adds a defined carbon edge to the rear of the updated Tesla Model 3 Highland. It follows the Highland trunk lid and mounts with double-sided automotive adhesive, with no drilling into the vehicle. Choose matte woven, glossy woven or forged-pattern carbon fiber.
- Dry Carbon Fiber
- No Drilling
- Tape Included
- 3 Finishes
Características principales
-
Dry Carbon Fiber
The spoiler is made of dry carbon fiber, in woven or forged patterns
-
Highland Trunk Fit
The spoiler follows the updated Highland trunk edge.
-
Defined Rear Edge
Raised outer tips and a continuous center section add a purposeful line
-
Three Finishes
Choose matte woven, glossy woven or forged pattern
-
No Drilling
The spoiler mounts to the painted trunk surface with double-sided automotive adhesive
-
Tape Included
The package includes a double-sided adhesive tape set
-
Installation Sequence
Dry fit, clean the bonding area, mark the center and allow the adhesive to set.
Aspectos destacados
A Defined Rear Edge
Raised outer tips and a continuous center section follow the Highland trunk edge. The installed image shows the profile; the other exterior modifications on the car are not included.
Carbon Surface and Finish Choices
The close-up shows the woven carbon surface. Choose matte woven, glossy woven or forged-pattern carbon fiber at purchase; the forged finish has an irregular flake-style appearance.
One Surface-Mounted Spoiler
The standalone view shows the curved profile and raised outer tips.
Compatibilidad
| Modelo | Years / Version | Notas |
|---|---|---|
| Model 3 Highland | 2023.10+ | Not for 2017–2023 Model 3, Model Y, Model S or Model X |
Fits Model 3 Highland 2023.10+. Does not fit 2017–2023 Model 3, Model Y, Model S or Model X.
Especificaciones
| Tipo de producto | Carbon fiber rear trunk spoiler, surface-mounted |
|---|---|
| Compatible Models | Model 3 Highland (2023.10+) |
| Position / Location | Rear trunk lid |
| Material | Dry carbon fiber |
| Surface Finish | Matte woven, glossy woven or forged pattern |
| Cantidad | 1 spoiler |
| Installation Type | Double-sided automotive adhesive; no drilling |
| Drilling Required | No |
| Contenido del paquete | 1 rear trunk spoiler, double-sided automotive adhesive tape set |
| Peso del envío | 1.45 kg (3.2 lb) |
What's in the Box
- 1×Model 3 Highland rear trunk spoiler
- 1×Double-sided automotive adhesive tape set
Instalación
- Keep the adhesive liner on and place the spoiler against the trunk to set its position and orientation.
- Remove wax, dust and oil with a paint-compatible cleaner, then allow the surface to dry.
- Mark the spoiler center and both end positions with removable painter's tape.
- Peel the liner gradually, align to the marks and apply firm, even pressure across the full bonding area.
- The product instructions call for 48 hours dry and without pulling on the spoiler.
Conviene saber
Precaución
- For the Model 3 Highland (2023.10+) only; registration year alone can be misleading around the vehicle update.
- Dry-fit the spoiler before peeling the adhesive liner.
- Adhesive performance depends on surface preparation, temperature and alignment.
- The other exterior parts shown on the vehicle are not included.
- Use paint-compatible cleaning products.
Cuidado
- Avoid pulling on the spoiler or directing high-pressure water at its bonded edge.
Preguntas frecuentes
Will this fit a 2017–2023 Model 3?
No. It is shaped for the updated Model 3 Highland trunk introduced from late 2023.
Do I need to drill the trunk lid?
No. The spoiler uses double-sided automotive adhesive. Dry fit, cleaning and accurate alignment are essential before the liner is removed.
What is the difference between the three variants?
Matte and glossy show a woven carbon pattern with different surface reflections. The forged version has a more irregular, flake-style appearance.
How long should the adhesive set?
The product instructions call for keeping the installation dry and avoiding pulling for 48 hours after pressing it into place. Follow the supplied tape requirements for the actual temperature and curing conditions.
English 
German 
Spanish 