LED Headlight Assembly for Tesla Model S
Replace a matching Model S front LED headlight with the selected left, right or pair of assemblies. Choose Premium for a vehicle with the corresponding cornering-light equipment, or Standard for the matching non-cornering configuration. Beam adjustment is required after installation.
- Front LED Headlight
- Left / Right / Pair
- Premium or Standard
Características principales
-
Front LED Assembly
A complete front headlight assembly for matching LED-equipped Model S vehicles; it is not a rear lamp or a loose bulb.
-
Premium and Standard Choices
Premium is the cornering-light choice, while Standard is the non-cornering choice.
-
Left, Right or Pair
Select the vehicle left side, right side or both; a single-side selection supplies one headlight.
-
Polycarbonate Lens
The lens covers the lamp assembly.
-
Original Part Match
The housing mounts, connector pinout and lighting functions follow the original Model S LED headlight assembly.
-
Instalación
Front fascia access and careful handling of wiring, mounts and seals are required.
-
Beam Alignment
Beam aim is set after installation; a software reinstall alone does not set the physical beam alignment.
Aspectos destacados
A Complete Front Lamp
The assembly combines the front lamp housing and polycarbonate lens. Left and right assemblies are vehicle-side specific.
Rear Interfaces
The rear of the housing carries the mounts, seals and connector for the original LED headlight interface.
Choose the Lighting Version
Premium is the cornering-light choice and Standard is the non-cornering choice. Order Left, Right or Pair to suit the vehicle side and replacement scope; do not treat the versions as an automatic lighting upgrade.
Compatibilidad
| Modelo | Years / Version | Notas |
|---|---|---|
| Model S | 2016–2022 | Premium choice with cornering lights. |
| Model S | 2016–2017 | Standard choice without cornering lights. |
Fits Model S 2016–2022 with LED headlights. Does not fit the nose-cone / Xenon configuration or Model S 2015 and earlier.
Especificaciones
| Tipo de producto | LED front headlight assembly |
|---|---|
| Compatible Models | Model S 2016–2022 LED-headlight configuration |
| Position / Location | Front; vehicle left, right or both sides |
| Material | Polycarbonate lens |
| Cantidad | 1 assembly for Left or Right; 2 assemblies for Pair |
| Light Source | LED |
| Installation Type | Assembly replacement; front fascia access required |
| Contenido del paquete | Selected left, right or pair of headlight assemblies |
| Version Options | Premium with cornering lights: 2016–2022 choice; Standard without cornering lights: 2016–2017 choice |
What's in the Box
- Headlight assembly: 1 selected left or right unit, or 2 units for the pair selection
Instalación
- Follow the applicable vehicle service procedure to secure the vehicle, obtain front fascia access and disconnect the headlight wiring safely.
- Install without forcing the harness or housing and refit all removed components using the applicable instructions.
- Perform any required diagnostic or configuration procedures, then adjust the beam aim.
Conviene saber
Precaución
- Installation requires front fascia access. Vehicle configuration and beam aiming are separate steps.
- Does not fit pre-facelift nose-cone / Xenon configurations or Model S 2015 and earlier.
Cuidado
- Clean the lens gently with a suitable soft cloth. Avoid abrasive polishing or chemicals that can damage the lens coating.
- Have damaged mounts, persistent moisture, lighting faults or incorrect beam patterns inspected promptly. Do not continue road use with defective required lighting.
Preguntas frecuentes
Can I order only one headlight?
Yes. Left and Right each select one vehicle-side assembly; Pair selects both. Choose the matching Premium or Standard version as well.
Is Premium a cornering-light upgrade for every Model S?
No. Premium is the version for vehicles equipped with cornering lights; Standard is the version without cornering lights.
Does a software reinstall align the headlights?
No. Any required software or configuration procedure is separate from beam-aim measurement and adjustment.
English 
German 
Spanish 