200W DC Adapter and PoE Injector for Starlink Gen 3

A 5-in-1 DC adapter for Starlink Standard (Gen 3), combining a dedicated passive PoE port, Gigabit Ethernet and USB-A/USB-C outputs. It accepts 9–36V DC. The adapter is listed at 200W; the pictured output label specifies 57V/3A maximum for the Starlink PoE connection.

Gen 3 Standard
9–36V DC Input
Gigabit Ethernet
USB-A & USB-C

Características principales

Dedicated Starlink PoE

The pictured specification lists a 57V/3A maximum PoE output for the Gen 3 Standard dish.
Wide DC Input

Runs from a 9-36V DC source, so a bulky inverter is not needed
Gigabit Ethernet

The wired Ethernet port supports 10/100/1000 Mbps link rates.
USB Outputs

Listed USB-A 12V/3A and USB-C 5V/3A maximum outputs require matching device voltage compatibility.
Listed Protection

The specification lists ±8kV differential surge protection, ±8kV contact ESD and ±15kV air ESD.
5-in-1 Design

Power, Ethernet and USB charging are combined in one all-in-one device
Gen 3 Optimized

Designed for seamless integration with the Starlink Standard (Gen 3) dish

Aspectos destacados

Direct DC Input - TESVX PoE Injector — Direct DC Input

Use a compatible 9–36V DC supply. The pictured specification calls for at least 200W of input power; a suitable DC supply replaces the inverter in this setup.

Ethernet and USB Ports - TESVX PoE Injector — Ethernet and USB Ports

The adapter combines a 10/100/1000 Mbps Ethernet port with USB-A and USB-C outputs. Ethernet link rate does not set your satellite internet speed.

Mobile Starlink Setup - TESVX PoE Injector — Mobile Starlink Setup

Designed for the Starlink Standard (Gen 3) dish, with a dedicated PoE connection.

Compatibilidad

Modelo	Years / Version	Notas
Starlink Standard	Gen 3	Powered from a 9-36V DC source

Designed for the Starlink Standard (Gen 3) dish.

Especificaciones

Tipo de producto	DC adapter with dedicated passive PoE injector
Compatible Models	Starlink Standard (Gen 3)
Conectividad	10/100/1000 Mbps Ethernet
Puertos	Gigabit Ethernet (10/100/1000 Mbps), USB-A, USB-C
Entrada	DC 9–36V; pictured specification requires at least 200W input power
Salida	Starlink PoE 57V/3A max; USB-A 12V/3A max; USB-C 5V/3A max
Potencia	200W listed adapter rating
Surge Protection	±8kV differential, listed
ESD Protection	±8kV contact / ±15kV air, listed

Conviene saber

Precaución

For the Starlink Standard (Gen 3) dish; do not connect the dedicated passive PoE output to unrelated Ethernet devices.

Cuidado

Keep the adapter dry and allow ventilation during use.

Preguntas frecuentes

Do I need an inverter to power my Starlink Gen 3 dish?

No. The injector runs directly from a 9-36V DC source, so a bulky inverter is not needed.

What USB outputs does it have?

The pictured specification lists USB-A at 12V/3A maximum and USB-C at 5V/3A maximum.

How fast is the Ethernet port?

The Ethernet port supports 10/100/1000 Mbps link rates. Actual internet speed depends on the Starlink connection and network.

What protection does it include?

Listed ratings are ±8kV differential surge, ±8kV contact ESD and ±15kV air ESD. These ratings do not guarantee protection from every electrical fault.