An Edge-to-Edge Dry Carbon Spoiler for the Model Y Juniper
Add an extended YL-style rear profile to the Model Y Juniper 2025+ or Model YL 2026+ with a pre-preg dry carbon fiber spoiler. Curved ends follow the trunk-lid profile, and pre-applied 3M VHB tape provides the adhesive mount. Choose Glossy Carbon Fiber, Matte Carbon Fiber or Forged Carbon Fiber.
- Dry Carbon Fiber
- YL-Style Profile
- 3M VHB Tape
- 3 Finish Options
- Juniper and YL
Características principales
-
YL-Style Rear Profile
An extended rear spoiler styled after the Model YL design
-
Dry Carbon Fiber
Pre-preg carbon fiber construction with a low-profile shape
-
Shaped Ends
Curved spoiler ends follow the rear trunk-lid profile
-
Pre-Applied VHB Tape
Adhesive mounting with pre-applied 3M VHB tape
-
Three Finish Options
Choose Glossy Carbon Fiber, Matte Carbon Fiber or Forged Carbon Fiber
-
Vehicle Fitment
For Model Y Juniper 2025+ and Model YL 2026+
Aspectos destacados
YL-Style Profile
The extended rear spoiler follows the trunk-lid line on the listed refreshed models. It is an aftermarket accessory with YL-inspired styling.
Curved Spoiler Shape
The low-profile shape has curved ends. Both tips follow the trunk-lid profile.
Carbon Surface
Pre-preg dry carbon fiber provides the spoiler structure. Choose the finish shown in the product options to suit your exterior.
Adhesive Mounting
Pre-applied 3M VHB tape attaches the spoiler to the prepared trunk surface. Center it before pressing, with particular attention to both ends.
Compatibilidad
| Modelo | Years / Version | Notas |
|---|---|---|
| Tesla Model Y Juniper | 2025+ | Rear trunk lid |
| Tesla Model YL | 2026+ | Rear trunk lid |
Fits Model Y Juniper 2025+ and Model YL 2026+.
Especificaciones
| Tipo de producto | Dry carbon fiber rear spoiler, extended YL-style profile |
|---|---|
| Compatible Models | Tesla Model Y Juniper 2025+ and Model YL 2026+ |
| Position / Location | Rear trunk lid |
| Material | 100% real dry carbon fiber, pre-preg construction |
| Surface Finish | Glossy, Matte or Forged carbon fiber |
| Installation Type | Pre-applied 3M VHB tape |
| Drilling Required | No, mounted with tape |
| Peso del envío | 1200 g (2.65 lb) |
Instalación
- Clean the mounting surface with an appropriate alcohol cleaner and let it dry; remove wax from the mounting area.
- Follow the adhesive preparation instructions supplied with the part.
- Peel the backing, position carefully and press firmly for 60 seconds, focusing on the ends.
Preguntas frecuentes
Does it need drilling?
It mounts with pre-applied 3M VHB tape rather than a drilled attachment.
Which models does it fit?
Model Y Juniper 2025+ and Model YL 2026+.
What finishes are available?
Glossy Carbon Fiber, Matte Carbon Fiber and Forged Carbon Fiber.
English 
German 
Spanish 