Pre-Cut TPU Film for Refreshed Model Y Air Vents
This two-piece TPU film set fits the designated interior air vent surfaces on Model Y Juniper 2025+ and Model YL 2026+. Its shaped pieces add a thin adhesive layer over those surfaces.
- TPU Film
- Two Pre-Cut Pieces
- Wet Application
- Single Use
Características principales
-
Pre-Cut Shape
Two shaped pieces are intended for the designated air vent surfaces on the listed refreshed models.
-
TPU Film
The flexible thermoplastic polyurethane film follows the surface profile during application.
-
Layered Structure
The film combines a surface layer, coating, TPU body, adhesive and removable backing.
-
Wet Application
A suitable neutral application solution allows positioning before liquid is worked out with a squeegee.
-
Two-Piece Set
The description lists two pre-cut protective film pieces for the designated sections.
-
Single Application
Use the film for one installation; peeled or contaminated adhesive should not be reused.
Aspectos destacados
Five-Layer Film Structure
The diagram separates the surface protection, coating, TPU body, adhesive and backing layers. The backing protects the adhesive until application; it is removed during fitting.
Compatibilidad
| Modelo | Years / Version | Notas |
|---|---|---|
| Model Y Juniper | 2025+ | Designated interior vent surfaces |
| Model YL | 2026+ | Designated interior vent surfaces |
Fits the interior vent surfaces of Model Y Juniper 2025+ and Model YL 2026+. Does not fit Model Y 2020–2024.
Especificaciones
| Tipo de producto | Pre-cut air vent protection film |
|---|---|
| Compatible Models | Model Y Juniper 2025+; Model YL 2026+ |
| Position / Location | Designated interior air vent surfaces |
| Material | TPU film |
| Cantidad | 2 pre-cut pieces |
| Installation Type | Wet adhesive application |
| Care Instructions | Keep dry and avoid washing for 3 days after application |
What’s in the Box
- 2×Pre-Cut TPU Protection Film Pieces
Instalación
- Mix the neutral shower-gel application solution in a spray bottle and shake well.
- Spray the mixture onto the film and matching solid contact surface, keeping vent passages and controls clear.
- Use a squeegee to remove the application liquid and air bubbles.
Conviene saber
Precaución
- Keep film and application liquid away from open vent passages, electronics and moving controls.
- Keep the fitted surfaces dry for three days; avoid washing, rain exposure and high-speed driving immediately after application.
Cuidado
- Avoid washing or rain exposure for three days after application.
- Avoid high-speed driving immediately after fitting, as instructed in the description.
- Peel slowly when removing; a surface-compatible cleaner removes any adhesive residue.
Preguntas frecuentes
Does it fit older Model Y vehicles?
The description lists Model Y Juniper 2025+ and Model YL 2026+. It excludes the 2020–2024 Model Y.
How many pieces are included?
The set contains two pre-cut TPU film pieces for the designated vent sections.
Will it block airflow?
No. The film covers the solid surfaces around the vents, not the vent openings.
Can it be reused?
No. It is intended for a single adhesive application.
Can I wash the car immediately?
Keep the treated surfaces dry and avoid washing or rain exposure for three days after application.
English 
German 
Spanish 