150 mm Non-Driven Front Hub Bearing Assembly
This alloy steel front hub bearing assembly is referenced to 1044122-00-E and specifies a 150 mm flange. It is intended for the non-driven front wheels of the listed Model 3 and Model Y vehicles.
- Ref. 1044122-00-E
- Alloy Steel
- 150 mm Flange
- Non-Driven Front
Características principales
-
Part Number Reference
Cross-referenced to original hub 1044122-00-E
-
Alloy Steel Construction
Alloy steel hub and bearing assembly
-
150 mm Flange
Specified flange diameter is 150 mm
-
Non-Driven Front Hub
Intended for the front wheels of the listed rear-wheel-drive vehicles
-
Wheel Studs
The wheel-facing flange has five studs
-
Knuckle Mounting
Bolt-on mounting flange attaches the assembly to the front knuckle
Aspectos destacados
Hub and Bearing Assembly
The assembly combines the wheel hub and bearing in a unit with a knuckle-mounting flange.
Wheel-Facing Flange
The wheel-facing flange has five studs. The specified flange diameter is 150 mm.
Bolt-On Mounting
The mounting flange attaches the hub to the knuckle. Removal and installation require the correct vehicle-specific brake and hub service procedures.
Compatibilidad
| Modelo | Years / Version | Notas |
|---|---|---|
| Tesla Model 3 | Non-driven front wheels only | |
| Tesla Model Y | Non-driven front wheels only |
1044122-00-E is the reference part number for this aftermarket replacement. Fits non-driven front wheels only.
Especificaciones
| Tipo de producto | Front wheel hub bearing assembly |
|---|---|
| Compatible Models | Tesla Model 3 / Model Y with non-driven front wheels |
| Position / Location | Front non-driven wheels |
| Material | High-strength alloy steel |
| Dimensiones | Flange diameter 150 mm (5.9 in) |
| OEM Part Number | 1044122-00-E reference; aftermarket replacement |
| Installation Type | Bolt-on hub assembly |
| Peso del envío | 3.7 kg (8.16 lb) |
Instalación
- Remove and install the wheel, brake and hub with the required replacement fasteners and tightening specifications.
Conviene saber
Precaución
- Installation follows the vehicle-specific service procedure, replacement fasteners and torque specifications.
- Have abnormal noise, vibration or warning indications diagnosed; these symptoms do not identify the hub as the only possible cause.
Preguntas frecuentes
Which wheels is it intended for?
Non-driven front wheels of the listed Model 3 and Model Y vehicles.
Is 1044122-00-E a genuine-part guarantee?
No. It is the reference part number of the original hub. This listing describes an aftermarket replacement.
Can one torque value be used for the whole job?
No. Each fastener has its own vehicle-specific torque value and reuse or replacement rule.
Does noise prove that the hub needs replacing?
No. Have noise, vibration or warning indications diagnosed before choosing parts.
English 
German 
Spanish 