A Carbon Fiber Spoiler for the Juniper Tailgate
Add a carbon fiber rear spoiler to the Model Y Juniper (2025+) tailgate in glossy, matte or forged-pattern finish. The installation uses 3M automotive adhesive tape and adhesion promoter without drilling. Does not fit Model YL, Model Y Standard or Model Y Juniper Performance.
- Real Carbon Fiber
- Gloss / Matte / Forged
- No Drilling
- 3M Tape
Características principales
-
Carbon Fiber Construction
Carbon fiber spoiler with glossy, matte or forged-pattern finish options
-
Three Finishes
Choose gloss for a wet-look shine, matte for a subtle finish or forged for a marble-like texture
-
No-Drill Installation
3M automotive tape and an adhesion promoter mean no drilling into the paint
-
Dry-Fit before Bonding
Line up the tailgate edge and mark the position before removing the tape backing
-
Tailgate Clearance
The spoiler leaves clearance around the edges
-
Trim-Specific Application
Model Y Juniper (2025+), excluding Juniper Performance, Model Y Standard and Model YL
Aspectos destacados
Juniper Rear-Edge Profile
The spoiler follows the rear tailgate edge of the named Juniper application. It is an exterior styling part without a stated downforce or range figure.
Glossy or Matte Carbon Appearance
Choose a glossy surface for reflected shine or a matte surface for a more subdued appearance. The woven-pattern options differ from the fragmented forged pattern.
Forged-Pattern Option
The forged carbon fiber option has a fragmented, marble-like visual pattern. Available in a forged-pattern finish.
Adhesive Mounting and Clearance
The kit includes 3M automotive adhesive tape and adhesion promoter. Dry-fit before bonding, keeping edge clearance through the full powered tailgate movement.
Compatibilidad
| Modelo | Years / Version | Notas |
|---|---|---|
| Model Y Juniper | 2025+ | Excludes Model YL, Model Y Standard and Juniper Performance |
Not compatible with Model YL, Model Y Standard or Model Y Juniper Performance.
Especificaciones
| Tipo de producto | Real carbon fiber rear trunk spoiler |
|---|---|
| Compatible Models | Model Y Juniper 2025+; not Model YL, Model Y Standard or Juniper Performance |
| Position / Location | Rear tailgate edge |
| Material | Carbon fiber with clear-coated surface |
| Surface Finish | Glossy, matte or forged carbon fiber |
| Cantidad | 1 spoiler |
| Installation Type | 3M automotive adhesive tape with adhesion promoter; no drilling |
| Contenido del paquete | Spoiler, 3M automotive adhesive and adhesion promoter |
| Peso del envío | 1,200 g (2.65 lb) |
What's in the Box
- 1×Carbon fiber rear trunk spoiler
- 3M automotive adhesive tape
- Adhesion promoter
Instalación
- Dry-fit the spoiler on the tailgate.
- Clean and dry the compatible bonding surface.
- Apply adhesion promoter to the bonding surface. Peel the tape backing and press the spoiler firmly along the bonding area.
- Follow the adhesive instructions for temperature, pressure and cure time before washing or rain exposure.
Conviene saber
Precaución
- Does not fit Model YL, Model Y Standard or Juniper Performance.
- Dry-fit before removing the tape backing.
- Follow the adhesive cure instructions.
Cuidado
- Avoid directing pressure-washer spray at bonded edges.
- Removal method must suit the actual adhesive and finish; paint, wrap and protective film can be damaged during removal.
Preguntas frecuentes
Does it fit the Juniper Performance?
No. The stated application is Model Y Juniper (2025+), excluding Juniper Performance, Model Y Standard and Model YL.
Why is there a small gap around the edges?
Edge clearance is needed for tailgate movement. The source describes a gap of approximately 0.5 mm.
What finishes are available?
Gloss carbon fiber, matte carbon fiber and forged carbon fiber.
English 
German 
Spanish 