TESVXtesvx.com
Fuente: https://tesvx.com/es/product/tesla-model-s-charge-port-door-assembly/
0

Reseñas

Todavía no hay reseñasSé el primero en compartir tu experiencia con este producto.

Especificaciones

Tipo de productoCharge port door assembly
Vehicle CompatibilityModel S 2016-2020 with motorized charge port door
Lugar de instalaciónLeft rear of vehicle
EstadoNew aftermarket replacement part
No se incluyeCharging socket, charge-port ECU, charging cable, complete tail-light assembly
Peso del envío400 g (0.88 lb)
MontajeRed outer reflector panel, black mounting body, powered hinge/actuator mechanism, attached wiring harness
Regional VersionUS Specification / EU Specification

Detalles

Replace the Model S Charge Port Door

A motorized charge-port door assembly for a damaged door or diagnosed faulty door actuator on a Tesla Model S (2016–2020) with an existing motorized door. It includes the red reflector door, black mounting body, powered hinge/actuator and attached harness for the left-rear location. US and EU specifications follow the original market and current charging configuration. This is a new aftermarket replacement.

  • Model S 2016–2020
  • US or EU Spec
  • Complete Assembly
  • Aftermarket Replacement

Características principales

  1. Complete Door Assembly

    The red outer reflector panel, black mounting body, powered hinge and actuator and attached harness come together

  2. US and EU Versions

    Each version follows the original market and charging configuration.

  3. Left Rear Position

    Both selections are for the left rear charge-port door location on the matched vehicle.

  4. Focused Repair

    Replaces a damaged door or a diagnosed faulty actuator without replacing the charging socket

  5. Calibration Planned

    Installation includes door calibration and alignment; some charging configurations need additional routines.

  6. Aftermarket Replacement

    A new aftermarket part, not a genuine Tesla part

Aspectos destacados

One Complete Assembly - TESVX Charge Port Door Assembly
One Complete Assembly

The assembly includes the red reflector door, mounting body, powered hinge and actuator mechanism and attached wiring harness. The charging socket, charge-port ECU, charging cable and tail-light assembly are separate and not included.

US and EU Specification

US and EU identify the vehicle specification, with their own connector and mounting layout. The shipping destination and steering-wheel position do not determine the version.

Plan the Calibration

Installation involves vehicle-specific access and isolation, door alignment and door calibration. Some charging configurations need additional routines.

Compatibilidad

Modelo Years / Version Notas
Model S 2016–2020 Motorized door, left rear, US or EU specification

Not for Model X, Model 3, Model Y, Model S 2021+, China GB/T configurations or manual-to-powered conversions.

Especificaciones

Tipo de producto Motorized charge port door assembly, aftermarket replacement
Compatible Models Tesla Model S 2016–2020 with motorized charge port door
Position / Location Left rear charge port
Color Red outer reflector panel; black mounting body
Cantidad 1 assembly
Connector Type Attached wiring harness; US or EU specification
Installation Type Replaces the existing door assembly; calibration required
Peso del envío 400 g (0.9 lb)

What's in the Box

  • 1×Charge port door assembly (red reflector door, mounting body, powered hinge/actuator, attached harness)

Instalación

Difficulty
Advanced
  1. Route the harness correctly, secure the assembly and adjust the door to the surrounding tail-light with clearance through its opening and closing travel.
  2. Complete the door calibration and any configuration-specific routines.

Conviene saber

Precaución
  • Choose the US or EU specification by the car's original market and existing charging configuration, not by shipping address or steering-wheel position.
  • Not for Model X, Model 3, Model Y, Model S 2021+, China GB/T configurations or manual-to-powered conversions.
  • Door calibration is part of the installation.
  • If the door opens and closes normally but the vehicle will not charge, the fault is not in this assembly.

Preguntas frecuentes

Does the motor come with this assembly?

Yes. One assembly includes the red reflector door, mounting body, powered hinge/actuator and attached harness. It does not include the charging socket, ECU, charging cable or complete tail-light assembly.

What decides US or EU for an imported car?

The original market and current charging configuration. The shipping address or steering-wheel position does not determine the version.

Will it fix every charging warning?

No. It replaces a damaged or failed door mechanism. The charging inlet, latch, ECU and vehicle wiring have separate functions.

Does installation require calibration?

Yes. Installation includes door calibration and alignment. Some charging configurations need additional service routines; a generic menu sequence does not apply to every vehicle.

Is this a genuine Tesla part?

No. It is described as a new aftermarket replacement for the matched Model S motorized-door application.

Recomendados

Seleccionar especificaciones

Entrega

Se envía en 1-3 días laborables

Free shipping on eligible orders of US$149 or more

Métodos de pago

  • PayPalPayPal
  • Tarjetas de débito y créditoVisaMastercardAmerican Express
  • Apple PayApple Pay
  • Google PayGoogle Pay
  • BancontactBancontact
  • BlikBlik
  • EPSEPS
  • iDealiDeal
  • MyBankMyBank
  • Przelewy24Przelewy24
  • TrustlyTrustly
  • MultibancoMultibanco

Los métodos disponibles pueden variar según la moneda y el país de facturación; la lista definitiva se muestra al finalizar la compra.

Servicio

  • Pago seguro

    Los pagos se procesan a través de una conexión cifrada.

  • Asistencia posventa

    Contacta con nosotros si tienes dudas sobre la instalación o el uso.

Especificaciones

Tipo de producto
Charge port door assembly
Vehicle Compatibility
Model S 2016-2020 with motorized charge port door
Lugar de instalación
Left rear of vehicle
Estado
New aftermarket replacement part
No se incluye
Charging socket, charge-port ECU, charging cable, complete tail-light assembly
Peso del envío
400 g (0.88 lb)
Montaje
Red outer reflector panel, black mounting body, powered hinge/actuator mechanism, attached wiring harness
Regional Version
US Specification / EU Specification

Escribe una reseña

Charge Port Door Assembly with US or EU Spec for Tesla Model S (2016–2020)
Valoración general *
¿Qué destacarías?opcional, hasta 3
Añadir fotos0 / 5
JPG, PNG o WebP, hasta 5 MB cada uno.

Las reseñas se revisan antes de publicarse. La etiqueta Compra verificada se añade automáticamente cuando tu correo electrónico coincide con el de un pedido.

TESVX product image
Charge Port Door Assembly with US or EU Spec for Tesla Model S (2016–2020)

US$159.99

Añadir al carrito Este producto tiene múltiples variantes. Las opciones se pueden elegir en la página de producto