A Sport-Style Edge for the Model Y Liftgate
This sport-style carbon fiber rear spoiler follows the pre-refresh factory liftgate of the Tesla Model Y (2020–March 2025). Its raised center and tapered outer ends add a continuous edge across the rear, with glossy or matte woven carbon-fiber finishes. Pre-applied double-sided automotive adhesive provides a surface-mounted installation without drilling; dry fit the complete edge before exposing the tape.
- Carbon Fiber
- Glossy or Matte
- No Drilling
- Pre-Refresh Model Y
Key Features
-
Sport-Style Profile
A raised center and tapered outer ends add a continuous dark edge across the liftgate
-
Carbon Fiber Weave
A woven carbon fiber surface in glossy or matte finish
-
No-Drill Adhesive
Pre-applied double-sided automotive adhesive mounts it to the painted liftgate
-
Pre-Refresh Fit
Made for the 2020–2025.03 Model Y body and factory liftgate, not the Juniper refresh
-
Guide Included
An installation guide comes in the package
-
Two Finishes
Choose glossy for more reflection or matte for a subdued look
Highlights
Profile and Finish
The sport-style shape has a subtle center rise and tapered ends. Glossy reflects more light and emphasizes the woven pattern, while matte has a more subdued, lower-reflection appearance.
Body, Not Only the Year
A 2025 registration can belong to either body style. It fits the pre-refresh body with the factory liftgate and does not fit the Juniper refresh, Model YL, Model 3, Model S or Model X.
Adhesive Installation
Dry fit first with the liners in place, clean and dry the surface, mark the center and end positions, then peel the liner gradually and press along the whole adhesive path. Keep the area dry for 48 hours.
Compatibility
| Model | Years / Version | Notes |
|---|---|---|
| Model Y | 2020–March 2025 | Pre-refresh rear body and factory liftgate. |
For the original pre-refresh Model Y rear body. It does not fit Juniper/refreshed Model Y, Model YL, Model 3, Model S or Model X. It does not fit over another spoiler or on an aftermarket liftgate.
Specifications
| Product Type | Sport-style carbon fiber rear spoiler |
|---|---|
| Compatible Models | Model Y 2020–March 2025, pre-refresh rear body and factory liftgate |
| Position / Location | Liftgate, rear |
| Material | Carbon fiber, woven surface |
| Surface Finish | Glossy or matte |
| Installation Type | Pre-applied double-sided automotive adhesive; no drilling |
| Package Contents | 1 rear spoiler with pre-applied double-sided tape, 1 installation guide |
| Shipping Weight | 1.45 kg (3.20 lb) shipping weight; not measured net product weight |
What's in the Box
- 1×Rear spoiler with pre-applied double-sided tape
- 1×Installation guide
Installation
- Remove any existing spoiler and old adhesive using a paint-safe method. Keep the new adhesive liners in place and dry fit the spoiler on the factory liftgate along the full edge, center and both ends.
- Remove wax, dust, oil and residue from the bonding area and let it dry fully.
- Mark the center and end positions with removable painter's tape.
- Peel the liner gradually, work across the spoiler keeping the center and ends aligned, and press firmly along the entire adhesive path.
- Keep the area dry and avoid pulling on the spoiler for 48 hours.
Good to Know
Caution
- Fits the pre-refresh Model Y body (2020–2025.03) only.
- Remove any factory or aftermarket spoiler and all old adhesive first, and do not peel the new liner until the part has been dry fitted.
- Keep the area dry and avoid pulling on the spoiler for 48 hours after installation.
- The spoiler is not a handle.
Care
- Keep the bonded area dry and avoid pulling on the spoiler for the first 48 hours.
- Clean the finish gently after the adhesive has set; avoid abrasive pads and strong solvents.
FAQ
Will it fit a 2025 Model Y?
Only if it is the pre-refresh body covered by the Model Y 2020–2025.03 option. It does not fit the refreshed Model Y Juniper.
Do I need to drill the liftgate?
No. The spoiler uses pre-applied double-sided automotive adhesive.
Can I install it over another spoiler?
No. Remove the existing spoiler and adhesive residue before dry fitting this part.
What is the difference between glossy and matte?
Both are woven carbon fiber options. Glossy reflects more light and emphasizes the weave, while matte has a lower-reflection appearance.
English 
German 
Spanish 