A Ver.3 Real Carbon Fiber Spoiler for the Model 3
Add the Ver.3 raised rear profile to the pre-Highland Model 3 2017–2023 with this carbon-fiber trunk spoiler. Choose Woven Gloss, Woven Matte or Forged Gloss. Included 3M VHB tape mounts the spoiler to the matching trunk surface.
- Real carbon fiber
- Model 3 2017–2023
- 3M VHB tape
- Three finishes
- Ver.3 profile
Key Features
-
Real carbon fiber
Available with woven 3K (2×2) or forged carbon pattern.
-
Ver.3 profile
A raised rear-trunk lip for the pre-Highland Model 3.
-
Three finishes
Woven Gloss, Woven Matte, or Forged Gloss.
-
Clearcoat finish
A coated carbon-fiber surface.
-
Adhesive mounting
Included 3M VHB tape fits the spoiler to the matching trunk.
-
3M VHB tape
Mounts with the included 3M VHB tape.
Highlights
Woven or forged carbon
Choose woven 3K (2×2) carbon or the irregular forged pattern. Minor pattern variations can occur in carbon-fiber parts.
Raised rear profile
The spoiler adds a shaped lip along the trunk edge. The close-up illustrates the woven finish; choose the actual finish in the options.
Pre-Highland Model 3
For the matching Model 3 2017–2023 trunk. Other body-kit parts shown on the car are not included.
Tape mounting
The spoiler bonds to the trunk with the supplied 3M VHB tape.
Compatibility
| Model | Years / Version | Notes |
|---|---|---|
| Model 3 (pre-Highland) | 2017-2023 | Rear trunk |
Fits pre-Highland Model 3 2017–2023.
Specifications
| Product Type | Carbon fiber rear trunk spoiler (Ver.3) |
|---|---|
| Compatible Models | Model 3 2017-2023 (pre-Highland) |
| Position / Location | Rear trunk |
| Material | Real carbon fiber (3K woven or forged) with a multi-layer UV-resistant clear coat |
| Surface Finish | Woven with gloss finish, woven with matte finish, or forged with gloss finish |
| Pattern / Weave | 3K (2×2) woven pattern or forged carbon pattern |
| Installation Type | 3M VHB adhesive tape (included) |
| Package Contents | 1 carbon fiber rear spoiler with 3M VHB adhesive tape |
What's in the Box
- 1×Carbon fiber rear spoiler
- 1×3M VHB adhesive tape (included)
Installation
- Clean the trunk surface thoroughly with isopropyl alcohol, remove any wax, oil or debris and dry it completely; install at 15-30°C (59-86°F).
- Position the spoiler with the adhesive backing still on to align it.
- Gently heat the 3M VHB tape with a hair dryer for 30-60 seconds, keeping it below 40°C (104°F).
- Remove the backing, position the spoiler carefully and press firmly for 60 seconds with even pressure.
- Hold the spoiler with painter's tape for the first 24 hours and allow 48-72 hours to cure before washing or high-speed driving.
Good to Know
Caution
- Fits the pre-Highland Model 3 2017-2023 only.
- Install at 15-30°C (59-86°F) and do not heat the tape above 40°C (104°F).
- Allow 48-72 hours to cure before washing or high-speed driving.
Care
- Clean with pH-neutral car soap and a soft microfiber cloth.
- Avoid automated car washes for the first 7 days.
FAQ
Does it fit the Model 3 Highland?
No. It fits the pre-Highland Model 3 2017-2023 only.
What is the spoiler made of?
Real carbon fiber in a 3K woven or forged pattern with a multi-layer UV-resistant clear coat.
Which finishes can I choose?
Woven Carbon Fiber with Gloss Finish, Woven Carbon Fiber with Matte Finish, and Forged Carbon Fiber with Gloss Finish.
English 
German 
Spanish 