Dry Carbon Fiber Rear-Screen Surround Trim for Cybertruck
Add carbon-fiber trim to the housing around the Cybertruck rear display. Choose the top cover, the U-shaped side-and-lower wrap, or the combined option, each in a Glossy or Matte finish. These adhesive-backed pieces cover the matching housing surfaces while leaving the touch display open.
- Cybertruck 2024+
- Dry Carbon Fiber
- Top / U-Shaped Trim
- Glossy or Matte
Key Features
-
Rear-Display Styling
Carbon-fiber trim dresses the housing around the rear screen in the Cybertruck cabin.
-
Top Cover Option
Rear Screen Frame Cover is the shaped cover above the display, identified by the TSLPK0903 SKU family.
-
Side-and-Lower Wrap
Frame Full Wrap is the U-shaped trim around the sides and lower edge, identified by the TSLPK0904 SKU family.
-
Combined Configuration
Select Rear Screen Frame Cover + Frame Full Wrap to combine the top cover and U-shaped wrap.
-
Two Surface Finishes
Glossy and Matte Carbon Fiber are separate finish choices for each configuration.
-
Adhesive Backing
The trim attaches over the matching housing surfaces; the touch display remains exposed.
Highlights
Rear Screen Frame Cover: Top Piece
The TSLPK0903 option is the shaped cover above the display. Its bent edges follow the top housing profile shown in the product photo.
Frame Full Wrap: Sides and Lower Edge
The TSLPK0904 option is the U-shaped wrap around the sides and lower edge. Its open center leaves the display face uncovered.
Combined Top Cover and U-Shaped Wrap
The combined Type pairs these two shapes in the selected finish. Choose this option when you want both housing areas covered.
Adhesive-Backed Housing Overlay
Each edge follows the original housing, leaving the screen opening, touch glass, vents and ports clear.
Compatibility
| Model | Years / Version | Notes |
|---|---|---|
| Cybertruck | 2024+ | Original rear-screen housing. |
Fits the Cybertruck 2024+ original rear-screen housing. Select the Type and finish you need; the combined option pairs the two trim shapes.
Specifications
| Product Type | Rear-screen surround trim: top cover and/or side-and-lower wrap |
|---|---|
| Compatible Models | Tesla Cybertruck, 2024 onward |
| Position / Location | Housing above and around the rear display; touch surface stays open |
| Material | Dry carbon fiber |
| Surface Finish | Glossy Carbon Fiber or Matte Carbon Fiber |
| Installation Type | Adhesive-backed overlay |
| Package Contents | Trim corresponding to the selected Type; single part or combined top cover and U-shaped wrap |
| Type Options | Rear Screen Frame Cover (TSLPK0903): top cover; Frame Full Wrap (TSLPK0904): sides and lower edge; combined option: both |
What's in the Box
- Rear-screen trim corresponding to the selected Type and finish
Installation
- With the adhesive liner in place, position the trim on the housing.
- Clean and fully dry the bonding surfaces with materials suitable for the vehicle trim and adhesive instructions.
- Remove the liner, align the piece and press without bonding to the touch glass or covering vents or ports.
- Allow the specified adhesive bonding time before handling or cleaning.
Good to Know
Caution
- Dry-fit the selected pieces against the rear-screen housing before removing the adhesive liner.
- Keep adhesive and trim edges off the touch glass, display opening, vents and connection ports.
- Removal can leave residue.
Care
- Wipe with a soft cloth and mild surface-compatible cleaner; avoid abrasive pads.
- Keep liquid and cleaner away from the display and connection ports.
FAQ
Which Type covers the area above the screen?
Rear Screen Frame Cover, in the TSLPK0903 SKU family, is the top piece above the rear display.
What does Frame Full Wrap cover?
The TSLPK0904 U-shaped piece covers the side-and-lower housing areas. Its center stays open around the display.
What does the combined Type contain?
Rear Screen Frame Cover + Frame Full Wrap combines the top cover and U-shaped wrap in the selected Glossy or Matte finish.
Does this cover the touch glass?
No. The trim is for the surrounding housing.
How are the pieces attached?
They use adhesive backing. Dry-fit first, prepare the housing as instructed and allow the specified bonding time. Removal can leave adhesive residue.
English 
German 
Spanish 