A Juniper-Exclusive Dry Carbon Rear Spoiler
A dry carbon fiber rear spoiler for the trunk edge of Tesla Model Y Juniper (2025+). Choose Matte, Glossy or Forged Carbon according to the listed option; the photos show a woven carbon finish. It attaches with pre-applied adhesive without drilling. Test-fit the spoiler before removing the backing and allow the adhesive to cure.
- Dry Carbon Fiber
- Juniper 2025+
- Adhesive Attachment
- Three Finishes
Key Features
-
Juniper Rear Spoiler
Shaped for the rear trunk edge on Model Y Juniper 2025+.
-
Dry Carbon Fiber
Carbon fiber construction with a visible surface pattern.
-
Three Finish Options
Matte and Glossy woven carbon, or the listed Forged Carbon option.
-
Adhesive Attachment
The listed pre-applied adhesive attaches the spoiler without drilling.
-
UV-Resistant Clear Coat
A clear coating covers the carbon surface; inspect and care for the finish during use.
Highlights
Juniper Rear Trunk Position
The fitted example shows the spoiler at the Juniper rear trunk edge. It is listed for the 2025+ refresh rather than the older 2020–2024 Model Y shape.
Woven Carbon Surface Detail
The photos show the woven carbon surface under a clear coat. Matte and Glossy finishes use a weave; the separate Forged Carbon option has a different pattern.
Trunk-Edge Profile
Shaped to the trunk edge of Model Y Juniper. It does not provide a measured downforce or efficiency improvement.
Compatibility
| Model | Years / Version | Notes |
|---|---|---|
| Model Y Juniper | 2025+ | Not compatible with Model Y 2020–2024 |
Fits Model Y Juniper 2025+. Does not fit Model Y 2020–2024.
Specifications
| Product Type | Dry carbon fiber rear trunk spoiler |
|---|---|
| Compatible Models | Model Y Juniper (2025+) |
| Position / Location | Rear trunk |
| Material | Dry carbon fiber with UV-resistant clear coat; woven or forged pattern by option |
| Surface Finish | Matte, Glossy or Forged carbon fiber |
| Pattern / Weave | 3K weave on woven finishes; forged pattern on Forged Carbon option |
| Quantity | 1 spoiler |
| Installation Type | Pre-applied 3M adhesive; no drilling |
| Package Contents | 1 Model Y Juniper carbon fiber rear spoiler with 3M adhesive |
| Shipping Weight | 1.2 kg (2.6 lb) |
What's in the Box
- 1×Model Y Juniper Carbon Fiber Rear Spoiler with pre-applied adhesive
Installation
- Clean the trunk surface thoroughly with isopropyl alcohol and let it dry completely; install at 15-30°C (59-86°F).
- Position the spoiler with the adhesive backing still on to align it with the trunk contours.
- Gently heat the 3M adhesive with a hair dryer for 30-60 seconds, keeping it below 40°C (104°F).
- Remove the adhesive backing, position the spoiler carefully and press firmly for 60 seconds with even pressure.
- Hold the spoiler in place with painter's tape for the first 24 hours and allow 48-72 hours to cure before washing or high-speed driving.
Good to Know
Caution
- Install at the listed 15–30°C (59–86°F); the listed maximum tape warming temperature is 40°C (104°F).
- The adhesive cures in 48–72 hours.
- Not compatible with the older Model Y 2020–2024 trunk shape.
Care
- Clean with pH-neutral car soap and a soft microfiber cloth.
- Avoid automated car washes for the first 7 days.
FAQ
Does it fit the older Model Y?
It is listed for Model Y Juniper 2025+ and is not compatible with the 2020–2024 trunk shape.
Which finishes are listed?
Matte Carbon Fiber, Glossy Carbon Fiber and Forged Carbon Fiber. The photos show a woven finish.
What is included?
One rear spoiler with pre-applied adhesive.
How should I prepare for installation?
Test-fit with the backing in place, clean and dry the trunk surface, then apply the tape within the listed temperature range, press it firmly and allow it to cure.
English 
German 
Spanish 