Four-Port Glovebox USB Hub with Leather Exterior
This compact hub is described with four output ports, including one USB 3.0 port, and a leather exterior. It is listed for the glovebox connection of Model 3 Highland 2024+ and Model Y Juniper 2025+. Tesla warns against connecting multiple devices through a USB hub because charging and device recognition can be affected.
- 4 Output Ports
- USB 3.0 Listed
- Leather Exterior
- Glovebox Format
Key Features
-
Four Output Ports
The description lists four outputs on one compact hub body.
-
USB 3.0 Label
One output is identified as USB 3.0; the label does not guarantee vehicle recording performance.
-
Leather Exterior
The exterior is described as leather for the glovebox accessory.
-
Plug Connection
The source describes a USB plug connection without additional drivers; device recognition remains vehicle-dependent.
-
Listed Vehicle Versions
The body names Highland 2024+ and Juniper 2025+.
-
Multiple-Device Restriction
Tesla guidance warns against connecting multiple devices through a USB hub.
Highlights
Compact Hub Body
The image shows the hub body and vehicle-side USB plug. The description identifies four outputs; the product image does not establish independent power capacity or simultaneous vehicle-device support.
USB 3.0 Identification
One output is identified as USB 3.0. This interface description does not establish reliable Dashcam or Sentry Mode recording through the hub.
Glovebox Placement
Fits the glovebox USB connection of Highland 2024+ and Juniper 2025+.
Compatibility
| Model | Years / Version | Notes |
|---|---|---|
| Model 3 Highland | 2024+ | Glovebox connection listed; vehicle multiple-device restriction applies. |
| Model Y Juniper | 2025+ | Glovebox connection listed; vehicle multiple-device restriction applies. |
Does not fit Model YL.
Specifications
| Product Type | Glovebox USB hub |
|---|---|
| Compatible Models | Model 3 Highland 2024+; Model Y Juniper 2025+ (listing) |
| Position / Location | Glovebox USB connection |
| Material | Leather exterior, as described |
| Ports | 4 output ports, including 1 identified as USB 3.0 |
| Connector Type | USB plug connection |
| Shipping Weight | 50 g (variant shipping weight) |
Installation
- Read the applicable vehicle USB guidance before connecting the accessory.
- Keep the recording drive connected directly to the vehicle port as required; do not connect multiple devices through the hub.
Good to Know
Caution
- Tesla instructs owners not to connect multiple devices using a USB hub; devices may fail to charge or be recognized by Media Player, Sentry Mode or Dashcam.
- Keep the recording drive connected directly to the vehicle port according to the applicable Tesla manual and drive requirements.
- Do not treat four outputs as four independent power supplies or assume supported fast charging, controllers or reliable recording.
Care
- Keep the hub dry and remove it without pulling on the vehicle socket.
FAQ
How many outputs are described?
Four outputs, including one identified as USB 3.0. This count does not establish simultaneous-device support in the vehicle.
Can I use all four ports for devices at once?
Tesla instructs owners not to connect multiple devices using a USB hub, as charging or Media Player, Sentry Mode and Dashcam recognition can be affected.
Does USB 3.0 guarantee recording reliability?
No. An interface label alone does not establish vehicle recording compatibility. Follow the direct recording-drive connection and drive requirements in the applicable vehicle manual.
Are phone fast-charging power and controller compatibility specified?
No per-port electrical rating or specific charging protocol is provided here. Do not infer supported fast charging or controller operation from the output count.
Which models are listed?
Model 3 Highland 2024+ and Model Y Juniper 2025+. The main body does not establish Model YL fitment.
English 
German 
Spanish 