Retractable Window Sunshades for the Juniper
These black mesh retractable shades are shaped for Model Y Juniper side windows. Local adhesive-mounted brackets hold the housing, and a top glass hook provides the window-following configuration. Choose the front two-piece, rear two-piece or combined four-piece set.
- Retractable Mesh
- Clip Brackets
- Front or Rear Sets
- Juniper Options
Key Features
-
Retractable Mesh
Pull the shade from its housing to cover the selected side-window area.
-
Glass Hook
The top hook attaches to the window glass for the window-following configuration.
-
Clip Brackets
Local adhesive-mounted brackets hold the housing; the updated mount uses clips rather than full-length tape.
-
Front Cutout
The front shade has a mirror-area gap.
-
Set Selection
Choose front two-piece, rear two-piece or combined four-piece coverage for Model Y Juniper.
-
Window Clearance
The top hook follows full glass travel and automatic glass lowering.
Highlights
Front Window Shape
The front shade has a gap near the mirror area. The installed example shows the mesh and outline.
Housing and Glass Hook
Local brackets hold the shade housing, while the top hook attaches to the glass for window-following use.
Choose Door Coverage
The front and rear sets each contain two pieces for their respective doors. The combined set contains four pieces for both front and rear door windows.
Compatibility
| Model | Years / Version | Notes |
|---|---|---|
| Model Y Juniper | Front 2-piece, rear 2-piece or combined 4-piece set. |
Match Model Y Juniper door and glass geometry to the selected front or rear pieces. Brackets, hooks and mesh must remain clear of seals, airbag trim, belts and controls; stop using a piece if it restricts door or window operation.
Specifications
| Product Type | Retractable side-window sunshade set |
|---|---|
| Compatible Models | Tesla Model Y Juniper |
| Position / Location | Front doors, rear doors or both, according to the selected set |
| Material | High-polymer interwoven mesh |
| Color | Black |
| Quantity | Front 2-piece; rear 2-piece; combined 4-piece set |
| Installation Type | Adhesive-mounted clip brackets with a top glass hook |
| Package Contents | Retractable window-shade set for the selected door positions |
| Shipping Weight | Rear set 730 g; front or combined set 1460 g; shipping figures, not net shade weights |
What's in the Box
- Retractable window-shade set: front 2 pieces, rear 2 pieces or combined 4 pieces, as selected
Installation
- Fit the front or rear pieces to their doors and set the brackets before removing any adhesive backing.
- Clean the bracket contact areas. Apply the left and right adhesive-backed brackets and press them firmly.
- Tilt the housing into the left clip, then align and snap it into the right clip. Do not force a mismatched housing or add extra fixings.
- For the glass-following configuration, draw out the shade and attach the top hook to the glass.
- Do not close the door against raised glass or a trapped hook.
Good to Know
Caution
- The glass automatically lowers slightly when the door opens or closes.
- A mirror cutout is not a visibility guarantee.
- Sunshades do not replace cabin temperature control.
Care
- Retract without pulling the mesh sharply or forcing the housing.
- Remove loose dust gently and follow the fabric care instructions before using cleaning products.
- Follow the adhesive removal instructions. Residue-free or damage-free removal is not stated.
FAQ
Which sets are available?
Model Y Juniper front two-piece, rear two-piece and combined four-piece sets, matched to their respective door windows.
Is the updated mounting entirely adhesive-free?
The housing snaps into local brackets. Those brackets use adhesive at their contact areas; the clip design replaces full-length tape on the housing.
Does the shade move with the window?
Yes. The top glass hook provides a window-following configuration.
Does the front cutout guarantee a clear view?
No. The cutout is at the mirror area only; the mesh covers the rest of the window.
English 
German 
Spanish 