Sculpted Trim for the Juniper Rear Bumper
Add sculpted details to the lower rear bumper of the Model Y Juniper with this ABS diffuser and lip range. Choose the full three-piece kit, the two-piece lower lip or the one-piece diffuser, then select glossy black, matte black or glossy or matte carbon-fiber texture. The components attach with automotive double-sided tape after dry fitting and careful surface preparation.
- ABS Body Pieces
- 4 Finishes
- Adhesive Mounting
- 3 / 2 / 1 Pieces
Key Features
-
Lower-Rear Styling
The sculpted pieces add raised details to the lower rear bumper of the matching Juniper body.
-
Three Component Choices
Choose the 3-piece diffuser and lip kit, the 2-piece lower lip option or the 1-piece diffuser option.
-
ABS Construction
The body pieces are ABS; the carbon-fiber choices are surface textures.
-
Four Finishes
Glossy black, matte black, glossy carbon-fiber texture and matte carbon-fiber texture are available.
-
Adhesive Attachment
The parts use double-sided automotive tape without drilling; dry fit and prepare the actual bonding surfaces first.
-
Full-Kit Preparation Supplies
The full kit lists three adhesion-promoter wipes and two rolls of double-sided tape.
Highlights
Style the Lower Rear
The illustrated pieces add shaped edges and fins to the lower Juniper rear bumper. Other body trim or the roof spoiler shown in vehicle images is not part of this kit.
Select the Component Group
The 3 Pcs option combines the rear diffuser and two lower lip side wings. Choose 2 Pcs for the lip side wings or 1 Pc for the diffuser. All four finishes use ABS, with carbon-pattern texture options.
Prepare the Bonding Surface
Dry fit the selected pieces before exposing or applying tape. Apply the adhesion promoter, align the parts and press along the bonding surfaces.
Compatibility
| Model | Years / Version | Notes |
|---|---|---|
| Model Y Juniper | 2025+ | Juniper refresh rear bumper only. |
Does not fit the original pre-refresh Model Y or an aftermarket bumper.
Specifications
| Product Type | ABS body kit: rear diffuser and lower bumper lip side wings |
|---|---|
| Compatible Models | Model Y Juniper 2025+ only |
| Position / Location | Rear bumper lower area |
| Material | ABS |
| Surface Finish | Glossy or matte |
| Color | Glossy Black, Matte Black, Glossy Carbon Fiber Texture, Matte Carbon Fiber Texture |
| Quantity | 3 pieces (diffuser + 2 lip wings), 2 pieces (lip) or 1 piece (diffuser) |
| Installation Type | Automotive double-sided tape; no drilling. |
| Package Contents | Full 3-piece kit: 1 center diffuser, 2 lower lip side wings, 3 adhesion-promoter wipes and 2 rolls of double-sided tape; partial options contain the selected component group |
| Warranty | 6 months against manufacturing defects |
| Shipping Weight | 1.4 kg (3.09 lb) shipping weight for the listed options; not measured net component weight |
What's in the Box
- 3 Pcs option: 1 rear diffuser center piece and 2 lower bumper lip side wings.
- 2 Pcs option: 2 lower bumper lip side wings.
- 1 Pc option: 1 rear diffuser center piece.
- Full kit: 3 adhesion-promoter wipes and 2 rolls of automotive double-sided tape.
Installation
- Dry fit the center and side pieces with the tape liners in place.
- Clean and fully dry the intended bonding surfaces using products suitable for the bumper finish. Follow the supplied adhesion-promoter directions and allow the required preparation time.
- For the lip wings, align each matching side piece and peel the backing progressively while pressing along the intended contact surface.
- For the center diffuser, apply the supplied tape to the intended surfaces as instructed, align the piece and press evenly without forcing an incorrect contour.
- Allow the adhesive to set for the time specified by its instructions.
Good to Know
Caution
- Fits the Model Y Juniper rear bumper.
- Dry fit all selected pieces and keep required lamps, reflectors, sensors, access panels and towing interfaces clear.
- The pieces reduce ground clearance at the rear bumper.
Care
- Keep the bond dry and undisturbed for the adhesive’s specified setting period.
- After setting, clean gently and avoid directing high-pressure water at bonded edges.
FAQ
What is included in each quantity option?
The full 3 Pcs choice contains one center diffuser and two lower lip side wings. The 2 Pcs choice contains the two lip side wings; the 1 Pc choice contains the center diffuser. The full kit lists three promoter wipes and two tape rolls.
Are the carbon-pattern choices real carbon-fiber parts?
The components are ABS. Glossy Carbon Fiber Texture and Matte Carbon Fiber Texture describe the surface appearance.
Does installation require drilling?
The components attach with automotive double-sided tape.
Can the parts be removed?
Adhesive removal needs a method suitable for the bumper finish. Residue or finish damage is possible; do not pull the parts off by force.
English 
German 
Spanish 