Snap-In Rubber Seal for the Model 3 Roof Glass
This black rubber seal sits in the exterior gap around the roof glass of the Model 3, including Highland. Its adhesive-free insert design is intended to help limit wind entering the gap and debris collecting there. A plastic squeegee is included to help position the strip.
- Roof-Glass Gap
- Black Rubber
- Snap-In Placement
- Squeegee Included
Key Features
-
Roof-Glass Application
The seal fits in the gap around the Model 3 roof glass, rather than replacing door weatherstrips.
-
Model 3 Coverage
Fits the original Model 3 and Highland.
-
Black Rubber Strip
Flexible black rubber follows the intended glass perimeter.
-
Adhesive-Free Placement
The snap-in design uses the existing gap without cutting, bonding or tape.
-
Application Tool Included
A plastic squeegee helps position the seal without using metal tools.
-
Removable Care
Clean with a damp cloth.
Highlights
Roof-Glass Perimeter
The insert follows the intended gap around the roof glass. The original glazing and drainage routes stay undisturbed.
Seat with the Plastic Tool
Use the supplied plastic squeegee to position the strip gently.
Flexible Black Rubber
The black rubber strip provides a simple insert for the gap. Clean with a damp cloth.
Compatibility
| Model | Years / Version | Notes |
|---|---|---|
| Model 3 | 2017–2023 (pre-Highland) | Roof-glass gap seal. |
| Model 3 Highland | Highland generation | Roof-glass gap seal. |
For Model 3 roof-glass gaps only. Does not fit Model Y or other vehicles.
Specifications
| Product Type | Roof-glass gap seal kit |
|---|---|
| Compatible Models | Model 3, including Highland |
| Position / Location | Exterior gap around roof glass |
| Material | Rubber |
| Color | Black |
| Installation Type | Snap-in; no adhesive, tape or cutting |
| Package Contents | 1 seal kit and 1 plastic squeegee |
| Care Instructions | Damp-cloth cleaning |
| Shipping Weight | 160 g (0.35 lb), listed shipping weight |
What's in the Box
- 1×Roof-glass rubber seal kit
- 1×Plastic squeegee
Installation
- Park the vehicle and clean and dry the roof-glass edge and surrounding gap.
- Start on the passenger side, locate the gap and gently roll the rubber into position.
- Work toward the rear and around the intended perimeter, using the plastic squeegee gently to seat the strip. Do not stretch it excessively, force a mismatch or lever on the glass.
Good to Know
Caution
- This insert does not repair damaged glass, failed original seals or water leaks.
Care
- Clean the seal and surrounding area with a damp soft cloth. Avoid aggressive solvents or scraping tools.
- The insert is not a repair for damaged glass or failed original seals.
FAQ
Does this include Highland?
Yes. It fits Model 3 Highland as well as the original Model 3.
Does installation use glue or cutting?
The kit uses snap-in placement in the roof-glass gap without cutting, adhesive or tape. A plastic squeegee is included. Do not force a poor fit or lever against the glass.
Will it eliminate every wind noise or fix a leak?
It is intended to help limit wind entering the roof gap and debris collecting there. Results vary with the vehicle and existing seals. It does not repair damaged glass, failed original seals or a water leak.
What is included and how is it maintained?
One rubber seal kit and one plastic squeegee are included. Clean with a damp cloth.
English 
German 
Spanish 